Tragbar
Universell DP
(CIRC009-07)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
Höhe 3 mm : 4-5 mal Schärfbar.
holz
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 160 | 2.2 | 1.6 | 8 | 20 | FLAT POS | Höhe 3 mm | DIAM1600801 |
| 160 | 2.2 | 1.6 | 12 | 20 | FLAT POS | Höhe 3 mm | DIAM1601201 |
| 190 | 2.4 | 1.6 | 8 | 30 | FLAT POS | Höhe 3mm | DIAM1900801 |
| 210 | 2.4 | 1.8 | 12 | 30 | FLAT POS | Höhe 3mm | DIAM2101201 |
| 260 | 2.4 | 1.8 | 12 | 30 | FLAT POS | Höhe 3mm | DIAM2601201 |
Industrielle Kreissägeblätter für eisenhaltiges Material und PVC
(CMT226)
Anwendung : Für Querschnitte auf verschiedenen Arten von Material.
Maschinen : Gehrungssägen ohne Schmierung, Jepson-Maschinen.
Werkstoffe : Eisenhaltiges Material und Stahl, der im Bauwesen verwendet wird.
Warnung : Bei eisenfreien Metallen, Holz, Glas, Beton und Plastik nicht verwenden.
Überschreiten Sie nicht die empfohlene Drehzahl, um bessere Ergebnisse zu erzielen
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 5 |
| - Qualität, ISO-Sorte : | K30 |
| - Härte (HV10) : | 1.520 |
| - Biegebruchfestigkeit (N/mm2) : | 2.300 |
In Pappverpackung verkauft: 226.060.10M / 226.080.12M / 226.090.14M
| D | K | P | Z | B | PH | α | β | Code | |
|---|---|---|---|---|---|---|---|---|---|
| 136.5 | 1.5 | 1.2 | 30 | 10 | 0° | 8° FWF | RPM : 4800 | CMT22603005 | |
| 136.5 | 1.5 | 1.2 | 30 | 20 | 0° | 8° FWF | RPM : 4800 | CMT22603005H | |
| 150 | 1.6 | 1.2 | 32 | 20 | 0° | 8° FWF | RPM : 4400 | CMT22603206H | |
| 160 | 2.0 | 1.6 | 30 | 20 | 2/6/32 | 0° | 8° FWF | RPM : 4100 | CMT22603006H |
| 165 | 1.5 | 1.2 | 36 | 15.87 | 0° | 8° FWF | RPM : 4000 | CMT22603606 | |
| 165 | 1.6 | 1.2 | 36 | 20 | 2/6/32 | 0° | 8° FWF | RPM : 4000 | CMT22603606H |
| 165 | 1.6 | 1.2 | 36 | 30 | 2/7/42 | 0° | 8° FWF | RPM : 4000 | CMT22603606M |
| 184 | 2.0 | 1.6 | 48 | 15.87 | 0° | 8° FWF | RPM : 3600 | CMT22604807 | |
| 190 | 2.0 | 1.6 | 40 | 30 | 2/7/42 | 0° | 8° FWF | RPM : 3500 | CMT22604007M |
| 210 | 2.2 | 1.8 | 48 | 15.87 | 0° | 8° FWF | RPM : 3100 | CMT22604808 | |
| 210 | 2.2 | 1.8 | 48 | 30 | 2/7/42 | 0° | 8° FWF | RPM : 3100 | CMT22604808M |
| 216 | 2.2 | 1.8 | 48 | 30 | 2/7/42 | 0° | 8° FWF | RPM : 3000 | CMT22604709M |
| 235 | 2.2 | 1.8 | 48 | 30 | 2/7/42 | 0° | 8° FWF | RPM : 2800 | CMT22604809M |
| 254 | 2.2 | 1.8 | 48 | 15.87 | 0° | 8° FWF | RPM : 2600 | CMT22604810 | |
| 254 | 2.2 | 1.8 | 60 | 15.87 | 0° | 8° FWF | RPM : 2600 | CMT22606010 | |
| 254 | 2.2 | 1.8 | 60 | 30 | COMBI3 | 0° | 8° FWF | RPM : 2600 | CMT22606010M |
| 305 | 2.2 | 1.8 | 60 | 25.4 | 0° | 8° FWF | RPM : 2100 | CMT22606012 | |
| 305 | 2.2 | 1.8 | 80 | 25.4 | 0° | 8° FWF | RPM : 2100 | CMT22608012 | |
| 305 | 2.2 | 1.8 | 80 | 30 | COMBI3 | 0° | 8° FWF | RPM : 2100 | CMT22608012M |
| 355 | 2.2 | 1.8 | 72 | 25.4 | 0° | 8° FWF | RPM : 1800 | CMT22607214 | |
| 355 | 2.2 | 1.8 | 90 | 25.4 | 0° | 8° FWF | RPM : 1800 | CMT22609014 | |
| 355 | 2.2 | 1.8 | 90 | 30 | COMBI3 | 0° | 8° FWF | RPM : 1800 | CMT22609014M |
Wechselzahn
(CIRC003-01)
Sehr widerstandsfähiges und vielseitig einsetzbares Baustellen-Kreissägeblatt.
paletten, NE-Metall, PVC
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code |
|---|---|---|---|---|---|---|
| 190 | 2.8 | 1.8 | 30 | 30 | ATB | LC1903001M |
| 235 | 2.8 | 1.8 | 34 | 30 | ATB | LC2353401M |
| 250 | 3.0 | 2.0 | 42 | 30 | ATB | LC2504201M |
| 300 | 3.2 | 2.2 | 48 | 30 | ATB | LC3004810M |
| 315 | 3.2 | 2.2 | 48 | 30 | ATB | LC3154806M |
| 350 | 3.2 | 2.2 | 54 | 30 | ATB | LC3505417M |
| 400 | 3.5 | 2.5 | 60 | 30 | ATB | LC4006005M |
| 450 | 3.5 | 2.5 | 66 | 30 | ATB | LC4506601M |
| 450 | 4.2 | 2.8 | 32 | 30 | ATB | LC4503203M |
| 500 | 4.0 | 2.8 | 72 | 30 | ATB | LC5007205M |
| 600 | 4.2 | 2.8 | 78 | 30 | ATB | LC6007801M |
| 700 | 4.2 | 3.2 | 84 | 30 | ATB | LC7008401 |
Holz und Holzprodukte - weniger als Ø160
(CIRC009-01.1)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
holz
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 100 | 3.0 | 2.0 | 16 | 20 | ATB | UNIVERSAL | LC1001602M |
| 120 | 1.8 | 1.2 | 36 | 20 | ATB | MAFELL | LC1203601 |
| 120 | 2.6 | 1.6 | 24 | 20 | ATB | UNIVERSAL | LC1202402 |
| 125 | 2.0 | 1.4 | 30 | 30 | ATB | MAFELL | LC1253001 |
| 125 | 2.6 | 1.6 | 24 | 20 | ATB | UNIVERSAL | LC1252413M |
| 130 | 2.6 | 1.6 | 24 | 20 | ATB | UNIVERSAL | LC1302401M |
| 130 | 2.6 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1304001M |
| 140 | 2.6 | 1.6 | 24 | 16 | ATB | UNIVERSAL | LC1402402M |
| 140 | 2.6 | 1.6 | 24 | 30 | ATB | UNIVERSAL | LC1402401M |
| 150 | 2.6 | 1.6 | 12 | 20 | ATB | UNIVERSAL | LC1501203 |
| 150 | 2.6 | 1.6 | 24 | 16 | ATB | UNIVERSAL | LC1502402M |
| 150 | 2.6 | 1.6 | 24 | 20 | ATB | UNIVERSAL | LC1502403M |
| 150 | 2.6 | 1.6 | 24 | 30 | ATB | UNIVERSAL | LC1502401M |
| 150 | 2.6 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1503605M |
| 150 | 2.6 | 1.6 | 36 | 30 | ATB | UNIVERSAL | LC1503601M |
| 150 | 2.6 | 1.6 | 48 | 16 | ATB | UNIVERSAL | LC1504805 |
Holz und Holzprodukte - Ø160
(CIRC009-01.2)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 160 | 1.8 | 1.2 | 24 | 20 | ATB | MAFELL / FESTOOL | LC1602409M |
| 160 | 1.8 | 1.2 | 32 | 20 | ATB | MAFELL / FESTOOL | LC1603201M |
| 160 | 1.8 | 1.2 | 48 | 20 | TF NEG | UNIVERSAL | LC1604809M |
| 160 | 1.8 | 1.2 | 48 | 20 | ATB | MAFELL / FESTOOL | LC1604808M |
| 160 | 1.8 | 1.2 | 56 | 20 | TF POS | MAFELL | LC1605601M |
| 160 | 2.2 | 1.6 | 24 | 20 | ATB | FESTOOL | LC1602412M |
| 160 | 2.2 | 1.6 | 48 | 20 | TF POS | FESTOOL | LC1604806M |
| 160 | 2.2 | 1.6 | 48 | 20 | ATB | FESTOOL | LC1604807M |
| 160 | 2.2 | 1.6 | 48 | 20 | ATB | FESTOOL Variable Zahnteilung |
LC1604810M |
| 160 | 2.5 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1603609 |
| 160 | 2.6 | 1.6 | 12 | 20 | ATB | UNIVERSAL | LC1601202M |
| 160 | 2.6 | 1.6 | 12 | 30 | ATB | UNIVERSAL | LC1601203 |
| 160 | 2.6 | 1.6 | 24 | 16 | ATB | UNIVERSAL | LC1602401M |
| 160 | 2.6 | 1.6 | 24 | 20 | ATB | UNIVERSAL | LC1602402M |
| 160 | 2.6 | 1.6 | 24 | 30 | ATB | UNIVERSAL | LC1602403M |
| 160 | 2.6 | 1.6 | 36 | 30 | ATB | UNIVERSAL | LC1603601M |
| 160 | 2.6 | 1.6 | 48 | 16 | ATB | UNIVERSAL | LC1604801M |
| 160 | 2.6 | 1.6 | 48 | 30 | ATB | UNIVERSAL | LC1604803 |
| 160 | 2.2 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1603603M |
| 160 | 3.2 | 2.2 | 30 | 20 | HFP | FESTOOL | LC1603001M |
ITK Plus Diamant-Kreissägeblätter für ultrahartes Material und Mineralwerkstoffe
(CMT236)
Anwendung : Für abrasive Materialien
Maschinen : Gehrungssägen, Handkreissägen.
Werkstoffe : Swisspearl®, Fermacell®, Ivarplank®, HardiePlank®, HardiePanel®, Corian®, Duroplast®, Formica® und Mineralwerkstoffe, Eternit®-Platten Gipskartonplatten und Thermoplast.
Stiftloch COMBI3: 2/7/42 + 2/9.5/46.5 + 2/10/60.
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 85 | 1.8 | 1.4 | 6 | 15 | 12° | TCG | CMT23608506G | |
| 160 | 2.4 | 1.8 | 4 | 20 | 2/6/32 | 12° | TCG | CMT23616004H |
| 160 | 2.4 | 1.8 | 10 | 20 | 2/6/32 | 5° | TCG | CMT23616010H |
| 165 | 1.8 | 1.4 | 4 | 20 | 2/6/32 | 12 | TCG | CMT23616504H |
| 165 | 1.8 | 1.4 | 10 | 20 | 2/6/32 | 5 | TCG | CMT23616510H |
| 180 | 2.4 | 1.8 | 4 | 20 | 2/6/32 | 12° | TCG | CMT23618004H |
| 190 | 2.4 | 1.8 | 4 | 30 | 2/7/42 | 12° | TCG | CMT23619004M |
| 190 | 2.4 | 1.8 | 12 | 30 | 2/7/42 | 12° | TCG | CMT23619012M |
| 210 | 2.4 | 1.8 | 12 | 30 | 2/7/42 | 12° | TCG | CMT23621012M |
| 216 | 2.4 | 1.8 | 14 | 30 | 2/7/42 | 12° | TCG | CMT23621614M |
| 230 | 2.4 | 1.8 | 4 | 30 | 2/7/42 | 12° | TCG | CMT23623004M |
| 250 | 2.4 | 1.8 | 16 | 30 | COMBI3 | 12° | TCG | CMT23625016M |
| 300 | 2.4 | 1.8 | 20 | 30 | COMBI3 | 12° | TCG | CMT23630020M |
ITK PLUS Kreissägeblätter für Längs- und Querschnitte
(CMT271-2)
Anwendung : Für Quer- und Längsschnitte bei hohen Drehzahlen geeignet. Dank des feinen Grundkörpers werden die Materialabfälle beträchtlich reduziert.
Maschinen : Tisch- und Gehrungssägen, Handkreissägen und Kabellose Handkreissägen.
Werkstoffe : Weiches und massives Holz, Sperrholz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 5-6 |
| - Qualität CHROM, ISO-Sorte : | KCR06 |
| - Härte (HV10) : | 1.550 |
| - Biegebruchfestigkeit (N/mm2) : | 2.300 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 136 | 1.5 | 1.0 | 18 | 20 (+10) | 20° | 10° ATB + 8° Shear | CMT27113618H | |
| 150 | 1.5 | 1.0 | 24 | 20 (+16) | 18° | 10° ATB + 8° Shear | CMT27115024H | |
| 160 | 1.7 | 1.1 | 24 | 20 (+16) | 2/6/32 | 18° | 10° ATB + 8° Shear | CMT27116024H |
| 165 | 1.7 | 1.1 | 24 | 20 (+15.87) | 2/6/32 | 18° | 10° ATB + 8° Shear | CMT27116524H |
| 165 | 1.7 | 1.1 | 24 | 30 | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27116524M |
| 184 | 1.7 | 1.1 | 24 | 20 (+16+15.87) | 2/7/42 | 20° | 10° ATB + 8° Shear | CMT27118424H |
| 184 | 1.7 | 1.1 | 24 | 30 | 2/7/42 | 20° | 10° ATB + 8° Shear | CMT27118424M |
| 190 | 1.7 | 1.1 | 24 | 30 (+20+16) | 2/7/42 | 20° | 10° ATB + 8° Shear | CMT27119024M |
| 200 | 1.8 | 1.2 | 36 | 30 | 2/7/42 | 15° | 10° ATB + 8° Shear | CMT27120036M |
| 210 | 1.8 | 1.2 | 36 | 30 (+25) | 2/7/42 | 15° | 10° ATB + 8° Shear | CMT27121036M |
| 216 | 1.8 | 1.2 | 36 | 30 | 2/7/42 | -5° Neg. | 10° ATB + 8° Shear | CMT27121636M |
| 235 | 2.4 | 1.6 | 36 | 30 (+25) | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27123536M |
| 250 | 2.4 | 1.6 | 42 | 30 | COMBI3 | 18° | 10° ATB + 8° Shear | CMT27125042M |
| 300 | 2.6 | 1.8 | 48 | 30 | COMBI3 | 18° | 10° ATB + 8° Shear | CMT27130048M |
Holz und Holzprodukte - von Ø162 nach Ø185
(CIRC009-01.3)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 162 | 1.8 | 1.2 | 48 | 20 | ATB | MAFELL | LC1624801 |
| 162 | 1.8 | 1.2 | 48 | 20 | TF POS | MAFELL | LC1624802M |
| 165 | 1.5 | 1.0 | 24 | 20 | ATB | DEWALT | LC1652404 |
| 165 | 2.2 | 1.6 | 24 | 20 | ATB | MAKITA | LC1652405M |
| 165 | 2.2 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1653602M |
| 165 | 2.2 | 1.6 | 48 | 20 | ATB | MAKITA | LC1654801M |
| 168 | 1.8 | 1.2 | 16 | 20 | ATB | MAFELL | LC1681601M |
| 168 | 1.8 | 1.2 | 32 | 20 | ATB | MAFELL | LC1683201M |
| 168 | 1.8 | 1.2 | 56 | 20 | ATB | MAFELL | LC1685601M |
| 170 | 2.6 | 1.6 | 24 | 30 | ATB | UNIVERSAL | LC1702402M |
| 170 | 2.6 | 1.6 | 52 | 30 | ATB | UNIVERSAL | LC1705201M |
| 170 | 2.8 | 1.8 | 36 | 16 | ATB | UNIVERSAL | LC1703602M |
| 170 | 3.0 | 2.0 | 36 | 30 | ATB | UNIVERSAL | LC1703601M |
| 180 | 2.5 | 1.6 | 12 | 20 | ATB | UNIVERSAL | LC1801201M |
| 180 | 2.8 | 1.6 | 36 | 20 | ATB | UNIVERSAL | LC1803602M |
| 180 | 2.8 | 1.8 | 30 | 22 | ATB | LAMELLO | LC1803002M |
| 180 | 2.8 | 1.8 | 36 | 16 | ATB | UNIVERSAL | LC1803601M |
| 180 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC1803603M |
| 180 | 2.8 | 1.8 | 40 | 20 | ATB | UNIVERSAL | LC1804208M |
| 180 | 2.8 | 1.8 | 40 | 25 | ATB | UNIVERSAL | LC1804204 |
| 180 | 2.8 | 1.8 | 56 | 30 | ATB | UNIVERSAL | LC1805602M |
| 180 | 3.0 | 2.0 | 42 | 16 | TF NEG | UNIVERSAL | LC1804209M |
| 180 | 3.0 | 2.0 | 42 | 30 | ATB | UNIVERSAL | LC1804202M |
| 182 | 2.8 | 1.8 | 24 | 16 | ATB | UNIVERSAL | LC1802401M |
| 182 | 2.8 | 1.8 | 24 | 20 | ATB | UNIVERSAL | LC1802403M |
| 182 | 2.8 | 1.8 | 24 | 30 | ATB | UNIVERSAL | LC1802402M |
| 185 | 2.4 | 1.4 | 24 | 30 | ATB | MAFELL | LC1852405M |
| 185 | 2.4 | 1.4 | 56 | 30 | ATB | MAFELL | LC1855601M |
| 185 | 2.6 | 1.6 | 36 | 30 | ATB | MAKITA | LC1853601 |
| 185 | 2.8 | 1.8 | 24 | 20 | ATB | DEWALT | LC1852401M |
| 185 | 2.8 | 1.8 | 48 | 30 | ATB | MAKITA | LC1854801M |
ITK PLUS Kreissägeblätter für Querschnitte
(CMT272)
Anwendung : Für Querschnitte bei hohen Drehzahlen geeignet. Dank des feinen Grundkörpers werden die Materialabfälle beträchtlich reduziert.
Maschinen : Tisch- und Gehrungssägen, Handkreissägen und Kabellose Handkreissägen.
Werkstoffe : Weiches und massives Holz, Sperrholz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 5-8 |
| - Qualität CHROM, ISO-Sorte : | K01 |
| - Härte (HV10) : | 1.840 |
| - Biegebruchfestigkeit (N/mm2) : | 2.050 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 136 | 1.5 | 1.0 | 36 | 20 (+10) | 18° | 10° ATB + 8° Shear | CMT27213636H | |
| 150 | 1.5 | 1.0 | 40 | 20 (+16) | 16° | 10° ATB + 8° Shear | CMT27215040H | |
| 160 | 1.7 | 1.1 | 40 | 20 (+16) | 2/6/32 | 16° | 10° ATB + 8° Shear | CMT27216040H |
| 165 | 1.7 | 1.1 | 36 | 20 (+15.87) | 2/6/32 | 20° | 10° ATB + 8° Shear | CMT27216536H |
| 184 | 1.7 | 1.1 | 40 | 20 (+16+15.87) | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27218440H |
| 184 | 1.7 | 1.1 | 40 | 30 | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27218440M |
| 190 | 1.7 | 1.1 | 42 | 30 (+20+16) | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27219042M |
| 200 | 1.8 | 1.2 | 48 | 30 | 2/7/42 | 15° | 10° ATB + 8° Shear | CMT27220048M |
| 210 | 1.8 | 1.2 | 48 | 30 (+25) | 2/7/42 | 15° | 10° ATB + 8° Shear | CMT27221048M |
| 216 | 1.8 | 1.2 | 48 | 30 | 2/7/42 | -5° Neg. | 10° ATB + 8° Shear | CMT27221648M |
| 235 | 2.4 | 1.6 | 48 | 30 (+25) | 2/7/42 | 18° | 10° ATB + 8° Shear | CMT27223548M |
| 250 | 2.4 | 1.6 | 60 | 30 | COMBI3 | 15° | 10° ATB + 8° Shear | CMT27225060M |
| 300 | 2.6 | 1.8 | 72 | 30 | COMBI3 | 15° | 10° ATB + 8° Shear | CMT27230072M |
Holz und Holzprodukte - von Ø190 nach Ø200
(CIRC009-01.4)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 190 | 1.8 | 1.2 | 24 | 30 | ATB | HILTI | LC1902413 |
| 190 | 1.8 | 1.2 | 42 | 30 | ATB | HILTI | LC1904201 |
| 190 | 2.6 | 1.8 | 32 | 20 | ATB | FESTOOL Bohrung Sternförmig |
LC1903203M |
| 190 | 2.6 | 2.0 | 48 | 20 | ATB | FESTOOL Bohrung Sternförmig |
LC1904803M |
| 190 | 2.6 | 1.6 | 58 | 20 | TF NEG | FESTOOL Bohrung Sternförmig |
LC1905401M |
| 190 | 2.8 | 1.8 | 14 | 16 | ATB | UNIVERSAL | LC1901401M |
| 190 | 2.8 | 1.8 | 14 | 30 | ATB | UNIVERSAL | LC1901402M |
| 190 | 2.8 | 1.8 | 24 | 16 | ATB | UNIVERSAL | LC1902401M |
| 190 | 2.8 | 1.8 | 24 | 20 | ATB | UNIVERSAL | LC1902402M |
| 190 | 2.8 | 1.8 | 24 | 30 | ATB | MAKITA | LC1902409M |
| 190 | 2.8 | 1.8 | 36 | 16 | ATB | UNIVERSAL | LC1903603M |
| 190 | 2.8 | 1.8 | 36 | 20 | ATB | UNIVERSAL | LC1903604M |
| 190 | 2.8 | 1.8 | 36 | 30 | ATB | MAKITA | LC1903602M |
| 190 | 2.8 | 1.8 | 48 | 30 | ATB | MAKITA | LC1904804M |
| 190 | 2.8 | 1.8 | 56 | 16 | ATB | UNIVERSAL | LC1905603M |
| 190 | 2.8 | 1.8 | 56 | 30 | ATB | FESTOOL | LC1905601M |
| 200 | 2.4 | 1.8 | 16 | 22 | AKB ATB | LAMELLO Links 4TF |
LC2001602M |
| 200 | 2.8 | 1.8 | 24 | 15 | ATB | UNIVERSAL | LC2002401M |
| 200 | 2.8 | 1.8 | 24 | 20 | ATB | UNIVERSAL | LC2002402 |
| 200 | 2.8 | 1.8 | 24 | 30 | ATB | MAFELL | LC2002403M |
| 200 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC2003602M |
| 200 | 2.8 | 1.8 | 48 | 15 | ATB | UNIVERSAL | LC2004805M |
| 200 | 2.8 | 1.8 | 48 | 30 | ATB | UNIVERSAL | LC2004804M |
| 200 | 2.8 | 1.8 | 64 | 30 | ATB | UNIVERSAL | LC2006406M |
| 200 | 3.0 | 2.0 | 64 | 16 | ATB | UNIVERSAL | LC2006402 |
Kreissägeblätter für Längsschnitte, für Handkreissägen
(CMT285-290-293)
Anwendung : Für Längsschnitte.
Maschinen : Gehrungssägen und Handkreissägen.
Werkstoffe : Weiches und massives Holz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 6~8 |
| - ISO-Sorte : | K10 |
| - Härte (HV10) : | 1.765 |
| - Biegebruchfestigkeit (N/mm2) : | 2.150 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 250 | 2.8 | 1.8 | 24 | 30 | COMBI3 | 20° | 10° ATB | CMT29025024M |
| 300 | 3.2 | 2.2 | 24 | 30 | COMBI3 | 20° | 10° ATB | CMT29302412M |
| 300 | 3.2 | 2.2 | 24 | 35 | 20° | 10° ATB | CMT29302412R | |
| 305 | 2.8 | 1.8 | 28 | 30 | 2/10/60 | 20° | 10° ATB | CMT29302822M |
| 315 | 3.2 | 2.2 | 28 | 30 | COMBI3 | 20° | 10° ATB | CMT29302812M |
| 315 | 3.2 | 2.2 | 36 | 30 | 2/10/60 + 2/7/42 | 15° | 5° ATB | CMT28503613M |
| 350 | 3.5 | 2.5 | 28 | 30 | COMBI3 | 20° | 10° ATB | CMT29302814M |
| 350 | 3.5 | 2.5 | 28 | 35 | 20° | 10° ATB | CMT29302814R | |
| 400 | 3.5 | 2.5 | 36 | 30 | COMBI3 | 20° | 10° ATB | CMT28503616M |
| 450 | 3.8 | 2.8 | 36 | 30 | 2/10/60 | 20° | 10° ATB | CMT28503618M |
| 500 | 4.0 | 2.8 | 44 | 30 | COMBI3 | 20° | 10° ATB | CMT28504420M |
Kreissägeblätter für Querschnitte, für Handkreissägen
(CMT281-285-292)
Anwendung : Für Quer- und Längsschnitte.
Maschinen : Tisch- und Gehrungssägen, Handkreissägen.
Werkstoffe : Weiches und massives Holz, Sperrholz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 6~8 |
| - Qualität, ISO-Sorte : | K10 |
| - Härte (HV10) : | 1.765 |
| - Biegebruchfestigkeit (N/mm2) : | 2.150 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 120 | 1.8 | 1.2 | 36 | 20 | 2/5.5/30 | 10° | 15° ATB | CMT29212036H |
| 120 | 1.8 | 1.2 | 40 | 20 | 2/5.5/30 | 10° | 15° ATB | CMT29212040H |
| 125 | 2.4 | 1.4 | 36 | 20 | 15° | 15° ATB | CMT29212536H | |
| 130 | 2.4 | 1.4 | 36 | 20 | 15° | 15° ATB | CMT29213036H | |
| 140 | 2.4 | 1.4 | 36 | 20 | 15° | 15° ATB | CMT29214036H | |
| 150 | 2.4 | 1.4 | 40 | 20 | 15° | 15° ATB | CMT29215040H | |
| 160 | 2.2 | 1.6 | 40 | 16 | 10° | 15° ATB | CMT29216040E | |
| 160 | 2.2 | 1.6 | 40 | 20 | 2/6/32 | 10° | 15° ATB | CMT29216040H |
| 160 | 2.2 | 1.6 | 40 | 30 | 2/7/42 | 10° | 15° ATB | CMT29216040M |
| 160 | 2.2 | 1.6 | 56 | 20 | 2/6/32 | 15° | 15° ATB | CMT29216056H |
| 165 | 2.2 | 1.6 | 40 | 20 | 2/6/32 | 10° | 15° ATB | CMT29216540H |
| 165 | 2.2 | 1.6 | 56 | 20 | 2/6/32 | 15° | 15° ATB | CMT29216556H |
| 165 | 2.6 | 1.6 | 40 | 30 | 2/7/42 | 10° | 15° ATB | CMT29216540M |
| 170 | 2.6 | 1.6 | 40 | 30 | 2/7/42 | 15° | 15° ATB | CMT29217040M |
| 180 | 2.6 | 1.6 | 40 | 20 | 2/6/32 | 15° | 15° ATB | CMT29218040H |
| 180 | 2.6 | 1.6 | 40 | 30 | 2/7/42 | 15° | 15° ATB | CMT29218040M |
| 184 | 2.6 | 1.6 | 40 | 16 | 15° | 15° ATB | CMT29218440E | |
| 184 | 2.6 | 1.6 | 40 | 30 | 15° | 15° ATB | CMT29218440M | |
| 190 | 2.6 | 1.6 | 40 | 16 | 2/6/32 | 15° | 15° ATB | CMT29219040E |
| 190 | 2.6 | 1.6 | 40 | 20 | 2/6/32 | 15° | 15° ATB | CMT29219040H |
| 190 | 2.6 | 1.6 | 40 | 30 | 2/7/42 | 15° | 15° ATB | CMT29219040M |
| 190 | 2.6 | 1.6 | 64 | 30 | 2/7/42 | 15° | 15° ATB | CMT29219064M |
| 190 | 2.4 | 1.6 | 48 | 20 (Festool® FF) | 5/7/2.5 | 10° | 15° ATB | CMT29219048FF |
| 200 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29220048M |
| 210 | 2.8 | 1.8 | 48 | 25 | 15° | 15° ATB | CMT29221048L | |
| 210 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29221048M |
| 210 | 2.8 | 1.8 | 64 | 30 | 2/7/42 | 15° | 15° ATB | CMT29221064M |
| 216 | 2.8 | 1.8 | 64 | 30 | 2/7/42 | -5° Neg. | 15° ATB | CMT29221664M |
| 216 | 2.8 | 1.8 | 80 | 30 | 2/7/42 | -5° Neg. | 15° ATB | CMT29221680M |
| 220 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29222048M |
| 225 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 10° | 15° ATB | CMT29222548M |
| 230 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29223048M |
| 230 | 2.8 | 1.8 | 64 | 30 | 2/7/42 + 2/10/60 | 15° | 15° ATB | CMT29223064M |
| 235 | 2.8 | 1.8 | 48 | 25 | 15° | 15° ATB | CMT29223548L | |
| 235 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29223548M |
| 240 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | 15° | 15° ATB | CMT29224048M |
Holz und Holzprodukte - von Ø210 nach Ø235
(CIRC009-01.5)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 210 | 2.4 | 1.8 | 36 | 30 | ATB | FESTOOL | LC2103605M |
| 210 | 2.4 | 1.6 | 60 | 30 | TF POS | FESTOOL | LC2106003M |
| 210 | 2.8 | 1.8 | 24 | 30 | ATB | FESTOOL | LC2102403M |
| 210 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC2103602M |
| 210 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC2103604 |
| 210 | 2.8 | 1.8 | 48 | 30 | ATB | UNIVERSELLE | LC2104804M |
| 210 | 2.8 | 1.8 | 64 | 30 | ATB | UNIVERSAL | LC2106401M |
| 216 | 2.3 | 1.6 | 36 | 30 | ATB NEG | FESTOOL | LC2163602M |
| 216 | 2.3 | 1.6 | 48 | 30 | ATB NEG | FESTOOL | LC2164812M |
| 216 | 2.8 | 1.8 | 24 | 30 | ATB NEG | UNIVERSAL | LC2162401M |
| 216 | 2.8 | 1.8 | 48 | 30 | ATB NEG | UNIVERSAL | LC2164804M |
| 216 | 2.3 | 1.6 | 60 | 30 | ATB NEG | FESTOOL | LC2166003M |
| 220 | 2.8 | 1.8 | 24 | 15 | ATB | UNIVERSAL | LC2202404M |
| 220 | 2.8 | 1.8 | 24 | 20 | ATB | UNIVERSAL | LC2202405 |
| 220 | 2.8 | 1.8 | 24 | 30 | ATB | UNIVERSAL | LC2202401M |
| 220 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC2203602M |
| 220 | 3.2 | 2.2 | 64 | 30 | TF POS | MAKITA | LC2206004M |
| 220 | 3.2 | 2.2 | 72 | 30 | TF POS | UNIVERSAL | LC2207201 |
| 225 | 2.5 | 1.8 | 32 | 30 | ATB | MAFELL | LC2253201 |
| 225 | 2.5 | 1.8 | 48 | 30 | TF POS | MAFELL | LC2254802M |
| 225 | 2.5 | 1.8 | 60 | 30 | ATB | FESTOOL | LC2256001M |
| 230 | 2.5 | 1.8 | 24 | 30 | ATB | UNIVERSAL | LC2302406M |
| 230 | 2.8 | 1.8 | 36 | 30 | ATB | UNIVERSAL | LC2303604M |
| 232 | 3.2 | 2.2 | 24 | 30 | ATB | UNIVERSAL | LC2322402M |
| 232.5 | 2.8 | 1.8 | 24 | 16 | ATB | UNIVERSAL | LC2302402M |
| 232.5 | 2.8 | 1.8 | 24 | 30 | ATB | MAFELL | LC2302403M |
| 235 | 2.8 | 1.8 | 24 | 30 | ATB | MAKITA | LC2352404M |
| 235 | 2.8 | 1.8 | 36 | 30 | ATB | MAKITA | LC2353602M |
| 235 | 2.8 | 1.8 | 48 | 30 | ATB | MAKITA | LC2354802M |
| 235 | 3.0 | 2.0 | 24 | 25 | ATB | UNIVERSAL | LC2352402M |
| 235 | 3.0 | 2.0 | 56 | 30 | ATB | UNIVERSAL | LC2355601M |
Holz und Holzprodukte - gröβer als Ø235
(CIRC009-01.6)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 237 | 2.5 | 1.8 | 12 | 30 | ATB | MAFELL | LC2371201M |
| 237 | 2.5 | 1.8 | 24 | 30 | ATB | MAFELL | LC2372401M |
| 237 | 2.5 | 1.8 | 56 | 30 | ATB | MAFELL | LC2375601M |
| 240 | 2.8 | 1.8 | 24 | 30 | ATB | FESTOOL | LC2402402 |
| 240 | 3.0 | 2.0 | 36 | 30 | ATB | UNIVERSELLE | LC2403601M |
| 240 | 3.2 | 2.2 | 60 | 30 | TF POS | UNIVERSAL | LC2406001M |
| 250 | 2.8 | 1.8 | 40 | 30 | ATB | MAFELL | LC2504007M |
| 250 | 3.2 | 2.2 | 24 | 30 | ATB NEG | UNIVERSAL | LC2502403M |
| 250 | 3.2 | 2.2 | 40 | 30 | ATB | MAFELL | LC2504003M |
| 250 | 3.2 | 2.2 | 48 | 30 | ATB NEG | UNIVERSAL | LC2504809M |
| 254 | 2.4 | 1.8 | 24 | 30 | ATB | UNIVERSAL | LC2542401M |
| 254 | 2.4 | 1.8 | 48 | 30 | ATB | UNIVERSAL | LC2544801M |
| 254 | 2.4 | 1.8 | 48 | 30 | ATB NEG | UNIVERSAL | LC2544802M |
| 254 | 2.4 | 1.8 | 60 | 30 | ATB NEG | UNIVERSAL | LC2546003M |
| 254 | 2.4 | 1.8 | 60 | 30 | ATB | UNIVERSAL | LC2546002M |
| 254 | 2.4 | 1.8 | 80 | 30 | TF POS | UNIVERSAL | LC2548002M |
| 260 | 3.2 | 2.2 | 60 | 30 | ATB | UNIVERSAL | LC2606001M |
| 260 | 3.2 | 2.2 | 60 | 30 | ATB NEG | UNIVERSAL | LC2606002M |
| 270 | 3.0 | 2.0 | 24 | 30 | ATB | UNIVERSAL | LC2702401M |
| 270 | 3.2 | 2.2 | 48 | 30 | ATB | MAKITA | LC2704801M |
| 280 | 3.2 | 2.2 | 24 | 30 | AKB ATB | UNIVERSAL | LC2802401M |
| 280 | 3.2 | 2.2 | 48 | 30 | ATB | MAFELL | LC2804801M |
| 305 | 3.2 | 2.2 | 24 | 30 | UNIVERSAL | LC3052401M | |
| 305 | 3.2 | 2.2 | 48 | 30 | ATB NEG | UNIVERSAL | LC3054804M |
| 305 | 3.2 | 2.2 | 60 | 30 | ATB NEG | UNIVERSAL | LC3056004M |
| 305 | 3.2 | 2.2 | 80 | 30 | ATB NEG | UNIVERSAL | LC3058002M |
| 330 | 3.2 | 2.2 | 24 | 30 | ATB | MAFELL | LC3302401M |
| 335 | 3.5 | 2.5 | 28 | 25 | AKB ATB | MAKITA | LC3352801 |
| 335 | 3.5 | 2.5 | 28 | 30 | AKB ATB | MAKITA | LC3352802M |
| 355 | 3.2 | 2.2 | 32 | 20 | AKB ATB | MAFELL | LC3553201M |
| 355 | 3.5 | 2.5 | 28 | 30 | AKB FLAT | UNIVERSAL | LC3552801M |
| 370 | 4.2 | 2.5 | 24 | 30 | AKB ATB | MAFELL | LC3702401M |
| 380 | 3.8 | 2.8 | 36 | 30 | ATB | UNIVERSAL | LC3803602 |
| 410 | 4.2 | 2.5 | 24 | 30 | AKB ATB | MAFELL | LC4102401M |
| 450 | 3.8 | 2.5 | 20 | 30 | AKB ATB | MAFELL | LC4502001 |
| 450 | 4.0 | 2.8 | 36 | 30 | AKB ATB | MAFELL | LC4503603M |
Kreissägeblätter für Querschnitte, für Handkreissägen
(CMT285-291)
Anwendung : Für Quer- und Längsschnitte.
Maschinen : Tisch- und Gehrungssägen, Handkreissägen.
Werkstoffe : Weiches und massives Holz, Sperrholz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 6~8 |
| - Qualität, ISO-Sorte : | K10 |
| - Härte (HV10) : | 1.550 |
| - Biegebruchfestigkeit (N/mm2) : | 2.150 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 120 | 1.8 | 1.2 | 18 | 20 | 2/5.5/30 | 15° | 15° ATB | CMT29112018H |
| 125 | 2.4 | 1.4 | 20 | 20 | 15° | 15° ATB | CMT29112520H | |
| 130 | 2.4 | 1.4 | 20 | 20 | 15° | 15° ATB | CMT29113020H | |
| 140 | 2.4 | 1.4 | 20 | 20 | 15° | 15° ATB | CMT29114020H | |
| 150 | 2.4 | 1.4 | 24 | 16 | 15° | 15° ATB | CMT29115024E | |
| 150 | 2.4 | 1.4 | 24 | 20 | 15° | 15° ATB | CMT29115024H | |
| 160 | 2.2 | 1.6 | 24 | 16 | 15° | 15° ATB | CMT29116024E | |
| 160 | 2.2 | 1.6 | 24 | 20 | 2/6/32 | 15° | 15° ATB | CMT29116024H |
| 160 | 2.2 | 1.6 | 24 | 30 | 2/7/42 | 15° | 15° ATB | CMT29116024M |
| 165 | 2.2 | 1.6 | 24 | 20 | 2/6/32 | 15° | 15° ATB | CMT29116524H |
| 165 | 2.6 | 1.6 | 24 | 30 | 2/7/42 | 15° | 15° ATB | CMT29116524M |
| 170 | 2.6 | 1.6 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29117024M |
| 180 | 2.6 | 1.6 | 24 | 20 | 2/6/32 | 20° | 10° ATB | CMT29118024H |
| 180 | 2.6 | 1.6 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29118024M |
| 184 | 2.6 | 1.6 | 24 | 16 | 20° | 10° ATB | CMT29118424E | |
| 184 | 2.6 | 1.6 | 24 | 30 | 20° | 10° ATB | CMT29118424M | |
| 190 | 2.6 | 1.6 | 24 | 16 | 2/6/32 | 20° | 10° ATB | CMT29119024E |
| 190 | 2.6 | 1.6 | 24 | 20 | 2/6/32 | 20° | 10° ATB | CMT29119024H |
| 190 | 2.6 | 1.6 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29119024M |
| 190 | 2.6 | 1.6 | 32 | 20 (Festool ® FF) | 5/7/2.5 | 10° | 10° ATB | CMT29119032FF |
| 200 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29120036M |
| 210 | 2.8 | 1.8 | 36 | 25 | 15° | 15° ATB | CMT29121036L | |
| 210 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29121036M |
| 216 | 2.8 | 1.8 | 48 | 30 | 2/7/42 | -5° Neg. | 15° ATB | CMT29121648M |
| 220 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29122036M |
| 225 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 20° | 15° ATB | CMT29122536M |
| 230 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29123036M |
| 235 | 2.8 | 1.8 | 36 | 25 | 15° | 15° ATB | CMT29123536L | |
| 235 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29123536M |
| 240 | 2.8 | 1.8 | 36 | 30 | 2/7/42 | 15° | 15° ATB | CMT29124036M |
Metall (DRY-CUT)
(CIRC009-02)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
metall
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 150 | 2.2 | 1.6 | 30 | 20 | DRYCUT | UNIVERSAL | LC1503005M |
| 160 | 2.0 | 1.6 | 42 | 20 | DRYCUT | UNIVERSAL | LC1604203M |
| 160 | 2.2 | 1.6 | 30 | 20 | DRYCUT | UNIVERSAL | LC1603006M |
| 180 | 2.2 | 1.6 | 34 | 30 | DRYCUT | UNIVERSAL | LC1803201M |
| 190 | 2.2 | 1.6 | 38 | 30 | DRYCUT | UNIVERSAL | LC1903801M |
| 190 | 2.2 | 1.8 | 48 | 30 | DRYCUT | UNIVERSAL | LC1904802M |
| 200 | 2.2 | 1.8 | 40 | 30 | DRYCUT | UNIVERSAL | LC2004001M |
| 210 | 2.0 | 1.6 | 54 | 30 | DRYCUT | UNIVERSAL | LC2105401M |
| 210 | 2.2 | 1.8 | 40 | 30 | DRYCUT | UNIVERSAL | LC2104001 |
| 216 | 2.2 | 1.8 | 54 | 30 | DRYCUT | UNIVERSAL | LC2165401M |
| 230 | 2.2 | 1.8 | 44 | 30 | DRYCUT | UNIVERSAL | LC2304001M |
| 235 | 2.2 | 1.8 | 44 | 30 | DRYCUT | UNIVERSAL | LC2354001M |
Kreissägeblätter für Längsschnitte, für Handkreissägen
(CMT290)
Anwendung : Für Längsschnitte.
Maschinen : Gehrungssägen und Handkreissägen.
Werkstoffe : Weiches und massives Holz.
| TECHNISCHE EIGENSCHAFTEN DER HM-ZÄHNE : | |
|---|---|
| - Zahnhöhe Millimeter : | 6~8 |
| - Qualität, ISO-Sorte : | K10 |
| - Härte (HV10) : | 1.550 |
| - Biegebruchfestigkeit (N/mm2) : | 2.150 |
| D | K | P | Z | B | PH | α | β | Code |
|---|---|---|---|---|---|---|---|---|
| 150 | 2.4 | 1.4 | 12 | 20 | 20° | 10° ATB | CMT29015012H | |
| 160 | 2.2 | 1.6 | 12 | 16 | 20° | 10° ATB | CMT29016012E | |
| 160 | 2.2 | 1.6 | 12 | 20 | 2/6/32 | 20° | 10° ATB | CMT29016012H |
| 180 | 2.6 | 1.6 | 12 | 30 | 2/7/42 | 20° | 10° ATB | CMT29018012M |
| 190 | 2.6 | 1.6 | 12 | 16 | 2/6/32 | 20° | 10° ATB | CMT29019012E |
| 190 | 2.6 | 1.6 | 12 | 20 | 2/6/32 | 20° | 10° ATB | CMT29019012H |
| 190 | 2.6 | 1.6 | 12 | 30 | 2/7/42 | 20° | 10° ATB | CMT29019012M |
| 200 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29020024M |
| 210 | 2.8 | 1.8 | 24 | 25 | 20° | 10° ATB | CMT29021024L | |
| 210 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29021024M |
| 216 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | -5° Neg. | 15° ATB | CMT29021624M |
| 220 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29022024M |
| 230 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29023024M |
| 235 | 2.8 | 1.8 | 24 | 25 | 20° | 10° ATB | CMT29023524L | |
| 235 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29023524M |
| 240 | 2.8 | 1.8 | 24 | 30 | 2/7/42 | 20° | 10° ATB | CMT29024024M |
| 260 | 2.8 | 1.8 | 28 | 30 | COMBI3 | 20° | 10°ATB | CMT29026028M |
| 270 | 2.8 | 1.8 | 28 | 30 | 2/7/42 | 20° | 10° ATB | CMT29027028M |
NE-Metall und Kunststoff
(CIRC009-03)
Kreissägeblatt für den Einsatz auf tragbaren Maschinen.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code | |
|---|---|---|---|---|---|---|---|
| 160 | 2.2 | 1.6 | 42 | 20 | NF TF NEG | FESTOOL | LC1604206M |
| 160 | 2.2 | 1.6 | 52 | 20 | NF TF NEG | FESTOOL | LC1605201M |
| 180 | 3.0 | 2.0 | 60 | 16 | NF TF NEG | UNIVERSAL | LC1806002 |
| 182 | 2.8 | 2.0 | 48 | 30 | NF TF NEG | UNIVERSAL | LC1824801M |
| 190 | 2.8 | 2.0 | 54 | 30 | NF TF NEG | FESTOOL | LC1905602M |
| 200 | 3.0 | 2.0 | 60 | 30 | NF TF POS | UNIVERSAL | LC2006002M |
| 200 | 3.0 | 2.0 | 64 | 30 | NF TF NEG | UNIVERSAL | LC2006001M |
| 200 | 3.2 | 2.2 | 60 | 30 | NF TF NEG | UNIVERSAL | LC2006004M |
| 216 | 2.8 | 2.0 | 48 | 30 | NF TF NEG | UNIVERSAL | LC2164802M |
| 216 | 2.3 | 1.6 | 60 | 30 | NF TF NEG | FESTOOL | LC2166004M |
| 216 | 2.8 | 2.0 | 60 | 30 | NF TF POS | UNIVERSAL | LC2166007 |
| 216 | 2.8 | 2.0 | 60 | 30 | NF TF NEG | UNIVERSAL | LC2166006M |
| 216 | 3.0 | 2.0 | 48 | 30 | NF TF POS | UNIVERSAL | LC2164808M |
| 220 | 3.2 | 2.5 | 60 | 30 | NF TF NEG | UNIVERSAL | LC2206001 |
| 232.5 | 2.8 | 2.0 | 62 | 30 | NF TF NEG | UNIVERSAL | LC2326201M |
| 260 | 2.5 | 1.8 | 80 | 30 | NF TF NEG | FESTOOL | LC2608001M |
| 254 | 2.4 | 1.8 | 80 | 30 | NF TF NEG | LC2548001M | |
| 305 | 2.6 | 1.8 | 80 | 30 | NF TF NEG | UNIVERSAL | LC3058004M |
| 305 | 3.2 | 2.5 | 96 | 30 | NF TF NEG | UNIVERSAL | LC3059601M |
| 315 | 3.4 | 2.6 | 96 | 30 | NF TF NEG | UNIVERSAL | LC3159601M |
Spezial-Edelstahl Zähne
(CIRC010-07)
HM Kreissägeblätter zum Zuschnitt von Rostfreiem Stahl. Exzellente Lebensdauer des Sägeblattes.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Mitnameloch | Typ | Code |
|---|---|---|---|---|---|---|---|
| 160 | 1.6 | 1.4 | 40 | 20 | 2/6/32 | ATB | LC1604003M |
| 190 | 1.6 | 1.4 | 48 | 30 | 2/7/42 | ATB | LC1904805M |
| 210 | 2.0 | 1.6 | 54 | 30 | 2/7/42 | ATB | LC2105403M |
| 216 | 2.0 | 1.6 | 54 | 30 | 2/7/42 | ATB | LC2165402M |
| 230 | 2.0 | 1.6 | 56 | 30 | 2/7/42 | ATB | LC2305602M |
| 250 | 2.2 | 1.8 | 60 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC2506012M |
| 254 | 2.2 | 1.8 | 60 | 25.4 | NF TF POS | LC2546001M | |
| 300 | 2.2 | 1.8 | 72 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC3007220M |
| 305 | 2.2 | 1.8 | 72 | 25.4 | NF TF POS | LC3057201M | |
| 350 | 2.4 | 2.0 | 84 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC3508412M |
| 355 | 2.4 | 2.0 | 84 | 25.4 | NF TF POS | LC3558401M |
HW-Kreissägeblätter für Sandwichmaterial
(CIRC010-08)
HM Kreissägeblätter zum Zuschnitt von Sandwichmaterialien.
| Ø | Schnitt | Blattkörper | Z | Bohr. | Mitnameloch | Typ | Code |
|---|---|---|---|---|---|---|---|
| 160 | 1.6 | 1.1 | 48 | 30 | NF TF POS | LC1604811M | |
| 190 | 1.6 | 1.1 | 56 | 30 | 2/7/42 | NF TF POS | LC1905604M |
| 210 | 1.8 | 1.4 | 66 | 30 | 2/10/60 + 2/11/63 + 2/12/64 | NF TF POS | LC2106601M |
| 230 | 1.8 | 1.4 | 72 | 30 | 2/10/60 + 2/11/63 + 2/12/64 | NF TF POS | LC2307201M |
| 250 | 2.2 | 1.8 | 72 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC2507203M |
| 300 | 2.2 | 1.8 | 84 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC3008413M |
| 330 | 2.4 | 2.0 | 90 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC3309001M |
| 350 | 2.4 | 2.0 | 100 | 30 | 2/10/60 + 2/11/63 + 2/12/64 + 2/7/42 | NF TF POS | LC35010001M |