Wood professionals

Discover our entire catalogue.

Nylon sheath

Nylon sheath
(MART020-01)

Code
For references :
MART02-6000E24A MART02-61E625A
MART02-6000Z17
For references :
MART02-6000E24A MART02-6000E24ASE MART02-61EB25A
MART02-6000Z16
For reference :
MART02-6000E14A
MART02-6000Z25
For reference :
MART02-61E025A
MART02-6000Z27
For references :
MART02-6000E44ASE MART02-6000E45ASE
MART02-6000Z15
For references :
MART02-6000E44A MART02-6000E45A
MART02-6000Z09
For references :
MART02-61EBHA MART02-61E0HA
MART02-61Z20
For references :
MART02-61E0HA MART02-61EBHA
MART02-61Z26
For references :
MART02-61EBDBA MART02-61EDBA
MART02-61Z12
For reference :
MART02-61E6DBA
MART02-61Z14
For references :
MART02-61EBTA MART02-61ETA
MART02-61Z19
For reference :
MART02-61E6TA
MART02-61Z13
For reference :
MART02-700EFF04SE
MART02-700Z29
For reference :
MART02-700EFF04
MART02-700Z28
For reference :
MART02-61EBM
MART02-61Z21

Aluminium sliding T bevel

Aluminium sliding T bevel
(MESU017-01)

30mm-wide arm equivalent to a carpenter's gauge. Graduation: cm and mm on one side, degrees on the other side. Non overlapping heel for measurement.

Length Code
300mm MESU62660
450mm MESU62661
600mm MESU62662

Related products

Ultra framing hammer "light"

Ultra framing hammer \
(MART008-01)

Leather Grip
Smooth face

D L Head weight Code
27 345 0.42 MART02-4102E15SR
27 395 0.42 MART02-4102E15S
30 395 0.53 MART02-4102E19S

Related products

Roofing hammer

Roofing hammer
(MART014-01)

Leather Grip
Smooth face

D L Head weight Code
24 330 0.6   MART02-4L0E239S
24 330 0.6 With magnet MART02-4LE239MS

Related products

Arno wood chisels

Arno wood chisels
(EBAUCHOIR-02)

Chisels specially designed for carpentry work. Each chisel is perfectly polished and finely sharpened. Equipped with a wrapped handle very comfortable: improved handling and insulate from the cold. Sizes: 20-25-28-30-35-40mm.

Length Width Code
170 20 FRAIEB20
170 25 FRAIEB25
345 30 FRAIEB30
360 40 FRAIEB40
375 35 FRAIEB35

Related products

Arno draw knives

Arno draw knives
(EBAUCHOIR-03)

Flat, concave or convexe draw knife with protection.

Form Width Code
CONCAVE 150 FRAICC150
CONVEXE 150 FRAICX150
PLATE 100 FRAIPL100
PLATE 150 FRAIPL150
PLATE 250 FRAIPL250

Crick levels

Crick levels
(MESU026-01)

CRICK is a level in hardwood laminated timber with a high mechanical resistance (bending, compression and twisting) and thermal resistance (no technical loss up to 100°C). 0.015° precision glass bubbles. Stainless steel ring.

Length Code
60 cm - 24" MESU24010
122 cm - 48" MESU48010

Related products

Sweep 1 - Double bevel straight chisel

Sweep 1 - Double bevel straight chiselSweep 1 - Double bevel straight chisel
(STUB007-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

Its cutting edge is straight with a double bevel.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
2 125 STUB550102
4 125 STUB550104
6 125 STUB550106
8 125 STUB550108
10 125 STUB550110
12 125 STUB550112
14 125 STUB550114
16 125 STUB550116
20 125 STUB550120
25 145 STUB550125
30 145 STUB550130
35 145 STUB550135
40 145 STUB550140
50 145 STUB550150
60 145 STUB550160

Sportman's Axe

Sportman\'s Axe
(MART018-01)

Leather Grip

S L Code
70 305 MART02-6000E14A
83 355 MART02-6000E24A

Related products

Carpenter pencils

Carpenter pencils
(MARQ009-02)

Length Code
250 Triangular multi-surface pencil MARQ0249
300 Carpenter pencil MARQ0248

Related products

Carpenter's chisel

Carpenter\'s chisel
(STUB001-01)

This tool is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.

Red beech handle

W blade L Handle L LT Weight Code
6 122 117 239 75 STUB351006
8 143 117 260 89 STUB351008
10 147 117 264 100 STUB351010
12 147 119 266 115 STUB351012
14 147 119 266 120 STUB351014
16 147 119 266 122 STUB351016
18 144 125 269 141 STUB351018
20 144 125 269 162 STUB351020
22 144 125 269 156 STUB351022
24 144 133 277 192 STUB351024
26 144 133 277 188 STUB351026
28 144 133 277 190 STUB351028
30 144 138 282 208 STUB351030
32 144 138 282 218 STUB351032
35 144 138 282 224 STUB351035
40 144 138 282 237 STUB351040

Standard steel tape measure with blocage

Standard steel tape measure with blocage
(MESU002-04)

Maximum measuring length of 3 measuring sticks.

Length Code
3 m MESU0020
5 m MESU0148

Ring tool

Ring tool
(STUB025-04)

This tool is designed for carving end grain. If well sharpened, a very nice finish is obtained.
It is composed of two cutting edges: an external bevel for hollowing and an internal bevel for straight cuts.

W L TL Weight Code
12 300 550 620 STUB703812
20 300 600 645 STUB703820

Box of carving knives - 6 parts

Box of carving knives - 6 partsBox of carving knives - 6 parts
(STUB021-01)

Set including :
- 1 straight chisel (l : 20 mm)
- 2 straight flat gouges (l: 6 mm and 20 mm)
- 1 straight curved gouge (l : 12 mm)
- 2 straight U gouges (l : 10 mm and 16 mm)

The set is made up of tools with different profiles

Code
Content : "STUB" 550220 - 550306 - 550320 - 550512 - 550810 - 550916 STUB560306

Deadblow compohammer

Deadblow compohammer
(MART047-01)

Regular model

D L Weight Code
35 260 0.405 MART02-5CR14E
40 290 0.64 MART02-5CR22E
50 325 0.79 MART02-5CR27E
60 365 1.32 MART02-5CR45E
70 400 1.575 MART02-5CR54E

Angle template tool

Angle template tool
(MESU031-02)

The angle template tool is fully suited to transfer polygonal shape contours to parts. Working with an angle template tool is much easier than using a measuring tape or ruler giving rise to greater precision than paper templates. Several aluminium sliders can be connected to obtain various straight lines. The slidiers can be placed on top of one another to perform intermediate dimensions as required.

Allows polygonal contours to be transferred to various parts
Easy to measure compared to a measuring tape or ruler
More accurate than a paper template
Almost any shape can be reproduced thanks to the different aluminium sliders

Code
MESUT510

Offset pry bars

Offset pry bars
(MART037-01)

L Code
305 MART02-EWB12
460 MART02-EWB18
610 MART02-EWB24
760 MART02-EWB30
915 MART02-EWB36

Clawhammer curved

Clawhammer curved
(MART001-01)

Leather Grip
Smooth face

D L Head weight Code
22 280 0.34 MART02-4000E12C
25 320 0.45 MART02-4000E16C
27 345 0.56 MART02-4000E20C

Related products

Original ARKANSAS sharpening stone

Original ARKANSAS sharpening stoneOriginal ARKANSAS sharpening stone
(STUB031-01)

Ideal for sharpening gouges, chisels, etc.

The size can vary by +/- 10 %. Use with sharpening oil

Shape W L Thick Weight Code
A - B - C - D 60 25 5 STUB534901
A 60 25 5 13 STUB534904
B 60 25 5 28 STUB534902
C 60 25 5 13 STUB534905
D 60 25 5 13 STUB534903

TOUGH GEAR SD tape measure

TOUGH GEAR SD tape measureTOUGH GEAR SD tape measureTOUGH GEAR SD tape measure
(MESU002-09)

Nylon-coated tape measure with automatic 0 point corrector hook.
Plastic shockproof cover, easy release, removable belt hook and safety cord.

Length Code
5.5m MESU80872
5.5m MESU80870
7.5m MESU80873

Hammerholder

Hammerholder
(MART005-01)

L B Code
145 100 MART02-4FWH0020

Set of carving knives - 14 parts

Set of carving knives - 14 parts
(STUB005-01)

Set including :
- 1 double bevel straight chisel (l : 4 mm)
- 2 straight chisels (l: 8/16 mm)
- 3 straight flat gouges (l : 6/10/20 mm)
- 2 straight curved gouges (l : 14/10 mm)
- 2 straight U gouges (l: Set including :
- 1 single bevel straight chisel (l : 6 mm)
- 1 straight V tool (l: 8 mm)
- 1 carving knife
- whittling
- 1 ARKANSAS original sharpening tool

The set is made up of tools with different profiles

Code
Content : "STUB" 550104 - 550208 - 550216 - 550306 - 550310 - 550420 - 550514 - 550610 - 550808 - 551003 - 552106 - 553908 - 510501 - 534908 STUB560214

Aluminium false square

Aluminium false square
(MESU017-02)

250mm length. Light for inside and outside corners. Extra flat double-sided heel. Locking knob.

Length Code
250mm MESU33921

Related products

Roofing hammer

Roofing hammer
(MART014-02)

Leather Grip
Milled face

D L Head weight Code
24 330 0.6   MART02-4L0E239M
24 330 0.6 With magnet MART02-4LE239MM

Related products

Special chisels - Swedish model

Special chisels - Swedish model
(STUB002-01)

"Swedish style" carpenter's chisels
This set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.

Cork handle

W blade L Handle L LT Weight Code
4 120 130 250 60 STUB357004
6 170 130 250 70 STUB357006
8 120 130 250 80 STUB357008
10 122 130 252 90 STUB357010
12 125 130 255 126 STUB357012
13 125 130 255 130 STUB357013
14 125 130 255 133 STUB357014
16 126 130 256 135 STUB357016
18 129 130 259 150 STUB357018
20 131 130 261 160 STUB357020
22 132 130 262 209 STUB357022
24 134 130 264 190 STUB357024
25 135 130 265 200 STUB357025
26 136 130 266 210 STUB357026
28 139 130 269 250 STUB357028
30 141 130 271 240 STUB357030
32 142 130 272 280 STUB357032
35 149 130 279 284 STUB357035

Kit of Arno wood chisels

Kit of Arno wood chisels
(EBAUCHOIR-01)

Kit of 4 or 6 Arno wood chisels.

Chisels specially designed for carpentry work. Each chisel is perfectly polished and finely sharpened. Equipped with a wrapped handle very comfortable: improved handling and insulate from the cold. Sizes: 20-25-28-30-35-40mm.

Code
Kit of 4 Arno wood chisels
Sizes : 20-30-35-40mm
FRAIEBX4
Kit of 6 Arno wood chisels
Sizes : 20-25-28-30-35-40mm
FRAIEBX6

Related products

Leather cases for Crick level

Leather cases for Crick level
(MESU026-02)

Leather case for the protection of your Crick level.

Length Code
60 cm - 24" MESU10124
122 cm - 48" MESU10148

Related products

Sportman's Axe - Special Edition

Sportman\'s Axe - Special Edition
(MART018-02)

Leather Grip

S L Code
83 355 MART02-6000E24ASE

Related products

Sweep 1 - Straight chisel

Sweep 1 - Straight chiselSweep 1 - Straight chisel
(STUB007-02)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.

The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles for carving work.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
2 125 STUB550202
4 125 STUB550204
6 125 STUB550206
8 125 STUB550208
10 125 STUB550210
12 125 STUB550212
16 125 STUB550216
20 125 STUB550220
25 145 STUB550225
30 145 STUB550230
35 145 STUB550235
40 145 STUB550240
50 145 STUB550250
60 145 STUB550260

Mortise chisel

Mortise chisel
(STUB025-06)

This tool is used to make mortises (rectangular hole, female part) to accommodate the tenon (male part) in the assembly of a part.

Shape l L TL Weight Code
1 15 x 3 300 480 230 STUB705003
1 15 x 6 300 480 300 STUB705006
2 15 x 6 300 480 290 STUB705506

Stair measuring tool

Stair measuring tool
(MESU031-01)

The stair measuring tool measures all shapes of steps. It is particularly suitable for making templates. All the gauges - 60, 80 or 100 cm - are connected to a central point to pivot.

To easily measure the shape of steps
Made of hardened steel

Length Code
60 - 80 - 100 MESUT500

Deadblow compohammer

Deadblow compohammer
(MART048-01)

Slim line model

D L Weight Code
22 240 0.265 MART02-5CS09S
38 310 0.675 MART02-5CS23S
41 325 0.79 MART02-5CS27S

Pry bars - Straight

Pry bars - Straight
(MART038-01)

L Code
610 MART02-EWB24PS
915 MART02-EWB36PS

LYRA DRY PROFI LED marker

LYRA DRY PROFI LED markerLYRA DRY PROFI LED marker
(MARQ009-06)

- Built-in LED spot light for precise application in dimly lit areas
- Ready to use, batteries already inserted
- Optimum positioning of LED spot light: push button on marker for simple and immediate use of LED spot light as required
- Top quality marker with automatic lead feed in high strength stainless steel tube
- Strong cap with improved clip easy to use with one hand
- Built-in sharpener with guide well thereby allowing for quick and easy sharpening without having to remove the cap from pocket
- Fitted with special all surface graphite lead (wood, metal, glass, ceramic, etc.) - writing easy to clean off smooth surfaces with a damp cloth
- Easy refilling of leads from front or rear of marker
- Multi-use thanks to coloured leads, for light or dark surfaces, erasable or water-proof. Available with sets of colours or one colour - leads refilled at front or rear of marker

Colour Code
GRAPHITE Display of 12 markers + 12 cases of 12 leads (8 graphites + 4 basics) MARQ9330
GRAPHITE Sold individually MARQ9329

Clawhammer curved

Clawhammer curved
(MART001-02)

Leather Grip
Smooth face

D L Head weigh Code
27 345 0.67 MART02-4000E24C

Related products

Marking gauge

Marking gauge
(STUB036-01)

Wooden marking gauge with graduation (150 mm) and adjusting screws.

L Weight Code
220 mm 160 gr STUB345501

Shockproof magnetic level gauge

Shockproof magnetic level gaugeShockproof magnetic level gauge
(MESU029-01)

Blue liquid and luminous resin for better visibility.
Very high precision of -/+ 1.0mm/m and easy to read.
With 45° vial.
Magnetic level, practical for steel working.

Length Code
600 MESU76407
900 MESU76409
1800 MESU73387

Panel carrier

Panel carrierPanel carrierPanel carrier
(STUB033-01)

For wooden panels or chipboard, steel, plastic sheets and other plaster boards.

Opening Weight Code
5 - 27 1 000 STUB441602

Carpenter's square

Carpenter\'s square
(MESU018-01)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Engraved and lacquered marks. Internal and external dimensions in cm and mm.

Length Code
300x150mm MESU10451
500x250mm MESU10450

Related products

Ultra framing hammer "light"

Ultra framing hammer \
(MART009-01)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
27 345 0.42 MART02-41E615SR
27 395 0.42 MART02-41E615S
30 395 0.53 MART02-41E619S

Related products

Set of carving knives - 20 parts

Set of carving knives - 20 parts
(STUB005-02)

Set including :
- 1 double bevel straight chisel (l : 25 mm)
- 2 straight chisels (l: 10/20 mm)
- 5 straight flat gouges (l : 6/10/16/25/50 mm)
- 6 straight curved gouges (l : 10/10/16/20/25/50 mm)
- 3 straight U gouges (l : 6/12/16/25 mm)
- 1 single bevel straight chisel (l : 8 mm)
- 1 straight V tool (l : 10 mm)

The set is made up of tools with different profiles

Code
Content : "STUB" 550125 - 550210 - 550220 - 550306 - 550310 - 550316 - 550350 - 550425 - 550510 - 550516 - 550550 - 550625 - 550710 - 550720 - 550906 - 550912 - 550916 - 550925 - 552108 - 553910 STUB560220

Mortise chisel

Mortise chisel
(STUB023-01)

This tool gets into narrow areas and sharp angles to make assemblies. It is used with a mallet for trimming surfaces and by hand for finishing.

W L LT β° Weight Code
8 240 425 70° 185 STUB362208
10 240 425 70° 216 STUB362210
12 240 425 70° 224 STUB362212
15 240 425 70° 237 STUB362215
20 240 425 70° 280 STUB362220
25 240 425 70° 320 STUB362225
30 240 425 70° 450 STUB362230
35 240 425 70° 450 STUB362235

Roofing hammer

Roofing hammer
(MART015-01)

Vinyl Grip
Shoc Reduction Grip
Smooth face

D L Head weight Code
24 345 0.6   MART02-4V00239S
24 345 0.6 With magnet MART02-4V0239MS

Related products

Camper's Axe

Camper\'s Axe
(MART019-01)

Vinyl Grip
Shock Reduction Grip

S L Code
85 360 MART02-61E625A

Related products

Sweep 1 - Single bevel chisel

Sweep 1 - Single bevel  chiselSweep 1 - Single bevel  chisel
(STUB007-03)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.
Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

Its cutting edge is straight with a single bevel.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
6 125 STUB552106
8 125 STUB552108
12 125 STUB552112
20 125 STUB552120

Stainless steel rule hard chrome finish

Stainless steel rule hard chrome finish
(MESU033-01)

- Hard chrome finish (matte processed) to prevent glare and make graduation easy to see
- Etching and plating finish maintains its performance even under harsh conditions
- Inch conversion chart and tap drill size chart on back (15 cm - 1 m)

For measuring length, drawing lines and marking

Length Code
1000 MESU13048
600 MESU13021
300 MESU13013
150 MESU13005

Splitting wedge

Splitting wedge
(MART030-02)

S L Code
48 230 MART02-70000E05

Related products

Deadblow compohammer

Deadblow compohammer
(MART049-01)

D L Weight Code
70 760 4 MART02-5CV144E
89 760 4.9 MART02-5CV176E

Stair drawing template

Stair drawing template
(MESU032-01)

Ideal for drawing stringers on turning stairsThe clamping bolts allow the templates to be connected to each other in a practical and efficient way. The height and width of the steps can be adjusted individually on each template.
Templates with millimetre graduation on both sides. The locks and templates are made of high quality stainless steel.

Made of stainless steel
Ideal for drawing stringers on turning stairs
Templates firmly fixed together with clamping bolts
Height and width of steps can be adjusted at will

Length Code
MESUT100
MESUT110

"I-Beam Construction" - Pry bar

\
(MART039-01)

L Code
455 MART02-750PB018

LYRA DRY PROFI marker

LYRA DRY PROFI markerLYRA DRY PROFI marker
(MARQ009-07)

- Top quality market with automatic lead feed in a high strength stainless steel tube
- Strong cap with improved clip easy to use with one hand
- Built-in sharpener with guide well thereby allowing for quick and easy sharpening without having to remove the cap from pocket
- Fitted with special all surface graphite lead (wood, metal, glass, ceramic, etc.) - writing easy to clean off smooth surfaces with a damp cloth
- Easy refilling of leads from front or rear of marker
- Multi-use thanks to coloured leads: for light or dark surfaces, erasable or water-proof.

Colour Code
GRAPHITE Display of 20 markers + 12 cases of 12 leads (8 graphites + 4 basics) MARQ9328
GRAPHITE Sold individually MARQ9327

Clawhammer curved

Clawhammer curved
(MART002-01)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
22 280 0.34 MART02-40E3012C
25 330 0.45 MART02-40E3016C
27 345 0.56 MART02-40E3020C
27 405 0.615 MART02-40E3022C
30 345 0.615 MART02-40E3022CR

Related products

Professional chisel with 2K handle

Professional chisel with 2K handle
(STUB002-03)

Professional wood chisel with a revolutionary handle highly resistant to shocks. With its ergonomic shape, it provides comfort during use and ensures fatigue-free handling.
Extra-long handle for precise control. Asymmetrical profile with non-slip rubber inserts.

W blade L Handle L LT Weight Code
4 120 130 250 60 STUB356004
6 120 130 250 70 STUB356006
8 120 130 250 80 STUB356008
10 122 130 252 90 STUB356010
12 125 130 255 126 STUB356012
13 125 130 255 130 STUB356013
14 125 130 255 133 STUB356014
16 126 130 256 130 STUB356016
18 129 130 259 150 STUB356018
20 131 130 261 160 STUB356020
22 132 130 262 168 STUB356022
24 134 130 264 180 STUB356024
25 134 130 264 200 STUB356025
26 136 130 266 205 STUB356026
28 139 130 269 220 STUB356028
30 141 130 271 228 STUB356030
32 142 130 272 240 STUB356032
35 149 130 279 275 STUB356035

Set of carving knives - 6 parts

Set of carving knives - 6 parts
(STUB021-02)

Set including :
- 1 straight chisel ( l : 20 mm)
- 2 straight flat gouges (l : 3/20 mm)
- 1 straight curved gouge (l : 12 mm)
- 2 straight U gouges (l : 10/16 mm)

The set is made up of tools with different profiles

Code
Content : "STUB" 550220 - 550306 - 550320 - 550512 - 550810 - 550916 STUB560206

Manual carrier

Manual carrierManual carrier
(STUB034-01)

Panel holder, bimaterial, can be used on the right or left.

Opening Weight Code
0.5 - 4 1 000 STUB441604

Carpenter's square 300 x 150mm

Carpenter\'s square 300 x 150mm
(MESU018-02)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Internal and external dimensions in cm and mm.

Length Code
300x150mm MESU12325

Related products

Ultra framing hammer "light"

Ultra framing hammer \
(MART009-02)

Vinyl Grip
Shock Reduction Grip
Milled face

D L Head weight Code
27 395 0.42 MART02-41E615SM
30 395 0.53 MART02-41E619SM

Related products

Spindle roughing gouge

Spindle roughing gouge
(STUB023-02)

Set including :
- 2 carving gouges (l : 13/22 mm)
- 1 double bevel chisel (l : 25 mm)
- 1 mortise chisel (l : 6 mm)

W Handle L LT Weight Code
10 240 425 208 STUB362810
13 240 425 230 STUB362813
18 240 425 280 STUB362818
22 240 425 348 STUB362822
27 240 425 355 STUB362827
32 240 425 400 STUB362832

Profile gauge

Profile gauge
(MESU021-01)

These models have perfectly sliding, effortless hardened steel pins in a graduated support. Very handy to take a moulding profile or make a cut.

Length Code
150mm MESU77970
200mm MESU77984
300mm MESU77971

Roofing hammer

Roofing hammer
(MART015-02)

Vinyl Grip
Shock Reduction Grip
Milled face

D L Head weight Code
24 345 0.6   MART02-4V00239M
24 345 0.6 With magnet MART02-4V0239MM

Related products

LYRA Dry Construction Marker

LYRA Dry Construction Marker
(MARQ009-01)

- Ideal for use with one hand with slide mechanism
- For all surfaces (wood, metal, plastic, glass, ceramic, etc.)
- Sharpener included in cap, secured by bayonet fastener
- 2B graphite lead, Ø2.8mm, refilled from the front of the marker
- Easy to erase from smooth surfaces
- Leads sold separately
- Ergonomic triangular shape

Camper's Axe

Camper\'s Axe
(MART019-02)

Vinyl Grip
Shock Reduction Grip

S L Code
85 360 MART02-61EB25A

Related products

Sweep 1 - Bent chisel

Sweep 1 - Bent  chiselSweep 1 - Bent  chisel
(STUB007-04)

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

The angled chisel has a straight cut, its angled part provides easier access to the bottom of patterns. It allows the handle to be raised so that it can project from the piece and facilitates the movement of the tool.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : work on openwork pieces, finishing of cuts and clearing of engravings

W L handle Code
6 125 STUB559906

Pry bars

Pry barsPry bars
(MART040-01)

L Code
380 MART02-750HB015
530 MART02-750HB021

Clawhammer curved

Clawhammer curved
(MART002-02)

Vinyl Grip
Shock Reduction Grip
Milled face

D L Head weight Code
30 345 0.615 MART02-40E3022CMR
30 405 0.615 MART02-40E3022CM

Related products

STAINLESS STEEL engraved 35cm carpenter's ruler

STAINLESS STEEL engraved 35cm carpenter\'s ruler
(MESU018-05)

Very sturdy, made of stainless steel, 1.4 mm thick, the carpenter's ruler is graduated in cm from 0 to 35 then in mm from 0 to 150, engraved by deep acid etching on both sides.
350 mm long to measure in cm from 0 to 350 then in mm from 0 to 150.
The ruler has a matt anti-reflective coating and a hole centred at the end.

Length Code
350 MESU103011

Related products

Protractor type circular saw guide

Protractor type circular saw guideProtractor type circular saw guideProtractor type circular saw guide
(MESU028-01)

Metal screw
Flat folding
Easy to handle

Length Code
300 MESU73160
600 MESU73162
1000 MESU73163

Alpha square

Alpha square
(MESU018-06)

For cutting or assembly marking.

Graduation drilled every 5 mm on short arm.
Thickness 1.5 mm.

Length Angle Code
450 / 210 90° MESUM908

Lifting pick

Lifting pick
(STUB035-01)

Long iron tool pointed and curved towards the handle. Used to move or turn logs.

Aluminium handle

W Weight Code
550 580 STUB674245

Diameter taper gauge

Diameter taper gaugeDiameter taper gaugeDiameter taper gauge
(MESU027-01)

A compact diameter taper gauge and ruler all in one.
Handy clip for depth measurement and to store the tool in your pocket.

Thickness : ​1.2mm 
Precision : 0.05mm 
Materiel : Stainless steel

Measure length Code
1-15mm MESU62600
15-30mm MESU62605

Framing hammer

Framing hammer
(MART010-01)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
27 345 0.42 MART02-41EB15SR
27 395 0.42 MART02-41EB15S
30 395 0.53 MART02-41EB19S

Related products

Skew chisel

Skew chisel
(STUB023-03)

This tool is used to make deep cuts but also to separate parts.

W Handle L LT β° Weight Code
6 x 15 240 425 25° 225 STUB363206

DRY LEADS - Set of leads

DRY LEADS - Set of leads
(MARQ009-03)

– For all surfaces
- Easy to erase from smooth surfaces
- Protect the red/yellow from high temperatures
- Unbreakable lead H7 Easy to remove
- One size For all diam.2.8mm
- Suitable For LYRA DRY PROFI / LYRA DRY PROFI LED / LYRA DRY

Colour Code
6 GRAPHITE 3 ROUGE 3 JAUNE MARQ9317
NOIR MARQ9320
JAUNE MARQ9322
ROUGE MARQ9323

Related products

Camper's Axe

Camper\'s Axe
(MART019-03)

Vinyl Grip
Shock Reduction Grip

S L Code
85 360 MART02-61E025A

Related products

Sweep 1 - Fish tail chisel

Sweep 1 - Fish tail chiselSweep 1 - Fish tail chisel
(STUB007-05)

The cutting edge of this tool is wider than the body. It penetrates more easily into intertwined shapes and openwork pieces. It is essentially used for finishing and generally by the force of the wrist.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

W L handle Code
2 125 STUB557102
4 125 STUB557104
6 125 STUB557106
8 125 STUB557108
10 125 STUB557110
12 125 STUB557112
14 125 STUB557114
16 125 STUB557116
20 125 STUB557120
25 145 STUB557125
30 145 STUB557130
35 145 STUB557135
40 145 STUB557140
50 145 STUB557150
60 145 STUB557160

Set of micro carving tools - 6 parts

Set of micro carving tools - 6 parts
(STUB022-02)

Set including 6 micro
-tools with ergonomic wooden handle for maximum control during delicate but also complex carvings.

Code
Content : "STUB" 580103 - 580207 - 580505 - 581103 - 582805 - 584103 STUB585606

Handy claw

Handy claw
(MART041-01)

L Code
255 MART02-760HC010

Clawhammer curved

Clawhammer curved
(MART002-03)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
27 345 0.67 MART02-40E3028C

Related products

Diameter and radius gauge

Diameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gauge
(MESU027-02)

To measure radii, diameters, lengths and thicknesses. Easy to use thanks to its compact size.

Dimensions : 175 x 15 x 0.5 mm
Weight : 7.5 g

Measure length Code
150 MESU73570
150 MESU73571

Set of carving knives - whittling - 5 parts

Set of carving knives - whittling - 5 parts
(STUB003-02)

Set of knives used for precision cutting

Code
Content : "STUB" 511601 - 511501 - 510701 - 510601 - 51050 STUB512005

Framing hammer

Framing hammer
(MART010-02)

Vinyl Grip
Shock Reduction Grip
Milled face

D L Head weight Code
27 395 0.42 MART02-41EB15SM
30 395 0.53 MART02-41EB19SM

Related products

Sweep 3 - Straight flat gouge

Sweep 3 - Straight flat gougeSweep 3 - Straight flat gouge
(STUB008-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550302
4 125 STUB550304
6 125 STUB550306
8 125 STUB550308
10 125 STUB550310
12 125 STUB550312
16 125 STUB550316
20 125 STUB550320
25 145 STUB550325
30 145 STUB550330
35 145 STUB550335
40 145 STUB550340
50 145 STUB550350
60 145 STUB550360

DRY LEADS - Set of waterproof leads

DRY LEADS - Set of waterproof leads
(MARQ009-04)

- For all surfaces
- Easy to erase from smooth surfaces
- Protect the red/yellow from high temperatures
- Unbreakable lead case, easy to remove
- One size for all diam.2.8mm
- Suitable for LYRA DRY PROFI / LYRA DRY PROFI LED / LYRA DRY
- Waterproof

Colour Code
4 VERT 4 BLEU 4 BLANC Waterproof MARQ9318
BLEU Waterproof MARQ9324
VERT Waterproof MARQ9325

Related products

Oval skew chisel

Oval skew chisel
(STUB024-09)

The oval cut of this tool provides better stability on the tool holder and also facilitates the cutting angle, providing a perfect surface.

W L TL Weight Code
12 300 490 250 STUB702812
15 300 490 270 STUB702815
20 300 490 350 STUB702820
25 300 490 380 STUB702825
30 300 490 430 STUB702830
35 300 490 490 STUB702835

Carpenter's square 700 mm

Carpenter\'s square 700 mm
(MESU018-11)

Seamless carpenter's square made of stainless steel The use of steel springs makes this square particularly flexible meaning it can bend without the risk of lasting deformation. The square can be easily fixed to parts and regain its initial shape. The carpenter's square is used for wooden assemblies. It allows for correct positioning of parts and assemblies. It also allows for marking and measurements.

Stainless steel
Millimetre graduation
Marking holes
Very flexible thanks to spring steel

Length Width Thickness Angle Code
700 300 1.2 90° (0.028°) MESUZ272

Pro claw moulding puller

Pro claw moulding puller
(MART042-01)

L Code
380 MART02-750NPC15

Ultra Clawhammer curved "light"

Ultra Clawhammer curved \
(MART003-01)

Leather Grip
Smooth face

D L Head weight Code
27 345 0.42 MART02-4010E15CR
27 395 0.42 MART02-4010E15C

Related products

Ultra Clawhammer curved "light"

Ultra Clawhammer curved \
(MART004-01)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
27 345 0.42 MART02-40E615CR
27 395 0.42 MART02-40E615C
30 395 0.53 MART02-40E619C

Related products

Bevel scale with level 120 x 240mm

Bevel scale with level 120 x 240mm
(MESU020-01)

Tool for setting or placing battens. Can be used to reproduce a slope by steadying the relevant angle in degrees.

Length Code
120x240mm MESU78546

Related products

Framing hammer

Framing hammer
(MART012-01)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
29 405 0.615 MART02-41E322S
30 405 0.67 MART02-41E324S
33 405 0.785 MART02-41E328S
35 405 0.84 MART02-41E330S

Related products

Box of turning tools - 4 parts

Box of turning tools - 4 parts
(STUB028-01)

Set including :
- 1 U bowl gouge (l : 13 mm)
- 1 round nose chisel (l : 20 mm)
- 1 flat chisel (l : 20 mm)
- 1 bent round end scraper (l : 25 mm)

Code
Content : "STUB" 701013 - 702220 - 702420 - 703025
Handle made of alder wood
STUB709404
Content : "STUB" 711013 - 712220 - 712420 - 713025
Cherry wood handle
STUB719404

Sweep 4 - Straight flat gouge

Sweep 4 - Straight flat gougeSweep 4 - Straight flat gouge
(STUB009-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550402
4 125 STUB550404
6 125 STUB550406
8 125 STUB550408
10 125 STUB550410
12 125 STUB550412
16 125 STUB550416
20 125 STUB550420
25 145 STUB550425
30 145 STUB550430
35 145 STUB550435
40 145 STUB550440
50 145 STUB550450
60 145 STUB550460

LYRA INK Deep Hole Marker

LYRA INK Deep Hole Marker
(MARQ009-05)

- Extra long tip of 35mm for precision marking
- Marker with profiled nib for areas difficult to access
- Marking on all surfaces (wood, metal, plastic, glass, ceramic, etc.)
- Permanent ink
- Plastic holder with belt clip
- Ergonomic triangular shape
- Available in black, blue and red

Colour Code
15 NOIRS + 5 ROUGES Display of 20 pieces MARQ9326
ROUGE Sold individually MARQ9313
BLEU Sold individually MARQ9314
NOIR Sold individually MARQ9315

Related products

Camper's Axe

Camper\'s Axe
(MART021-01)

Vinyl Grip
Shock Reduction Grip

S L Code
100 405 MART02-6000E44A
100 660 MART02-6000E45A

Related products

Double alpha protractor

Double alpha protractor
(MESU018-08)

Marking instrument with long edge and double graduated scale.

Made of stainless steel.
Marking holes.
Quarter circle in the centre.
Double graduated scale.

Length Width Thickness Code
800 360 5 MESUM710

Auger bit

Auger bit
(STUB025-08)

This tool is used for long hole boring such as lamp bases.

W L TL Weight Code
10 240 800 512 STUB706010

Pro claw nail puller

Pro claw nail puller
(MART043-01)

L Code
230 MART02-770PC210
255 MART02-770PC250
280 MART02-770PC280
305 MART02-770PC300
360 MART02-770PC360

Ultra Clawhammer curved

Ultra Clawhammer curved
(MART004-02)

Vinyl Grip
Shock Reduction Grip
Smooth face

D L Head weight Code
27 395 0.42 MART02-40EB15C
30 395 0.53 MART02-40EB19C

Related products

Digital bevel scale 107 x 230mm

Digital bevel scale 107 x 230mm
(MESU020-02)

Tool for measuring slopes. Quick reading.

Length Code
107x230mm MESU78545

Related products

Chalk line

Chalk line
(MESU022-01)

With an integrated tip for working alone. 20 m highly resistant braided wire. Thanks to the transparent box, you can see the powder. Manual winding.

Code
MESU77560

Related products

Page 1 of 3