Wood professionals

Discover our entire catalogue.

Measure

Standard steel tape measure with blocage

Standard steel tape measure with blocage
(MESU002-04)

Maximum measuring length of 3 measuring sticks.

Length Code
3 m MESU0020
5 m MESU0148

TOUGH GEAR SD tape measure

TOUGH GEAR SD tape measureTOUGH GEAR SD tape measureTOUGH GEAR SD tape measure
(MESU002-09)

Nylon-coated tape measure with automatic 0 point corrector hook.
Plastic shockproof cover, easy release, removable belt hook and safety cord.

Length Code
5.5m MESU80872
5.5m MESU80870
7.5m MESU80873

Aluminium sliding T bevel

Aluminium sliding T bevel
(MESU017-01)

30mm-wide arm equivalent to a carpenter's gauge. Graduation: cm and mm on one side, degrees on the other side. Non overlapping heel for measurement.

Length Code
300mm MESU62660
450mm MESU62661
600mm MESU62662

Related products

Aluminium false square

Aluminium false square
(MESU017-02)

250mm length. Light for inside and outside corners. Extra flat double-sided heel. Locking knob.

Length Code
250mm MESU33921

Related products

Carpenter's square

Carpenter\'s square
(MESU018-01)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Engraved and lacquered marks. Internal and external dimensions in cm and mm.

Length Code
300x150mm MESU10451
500x250mm MESU10450

Related products

Carpenter's square 300 x 150mm

Carpenter\'s square 300 x 150mm
(MESU018-02)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Internal and external dimensions in cm and mm.

Length Code
300x150mm MESU12325

Related products

Alpha square

Alpha square
(MESU018-06)

For cutting or assembly marking.

Graduation drilled every 5 mm on short arm.
Thickness 1.5 mm.

Length Angle Code
450 / 210 90° MESUM908

Carpenter's square 700 mm

Carpenter\'s square 700 mm
(MESU018-11)

Seamless carpenter's square made of stainless steel The use of steel springs makes this square particularly flexible meaning it can bend without the risk of lasting deformation. The square can be easily fixed to parts and regain its initial shape. The carpenter's square is used for wooden assemblies. It allows for correct positioning of parts and assemblies. It also allows for marking and measurements.

Stainless steel
Millimetre graduation
Marking holes
Very flexible thanks to spring steel

Length Width Code
MESU140061

Double alpha protractor

Double alpha protractor
(MESU018-08)

Marking instrument with long edge and double graduated scale.

Made of stainless steel.
Marking holes.
Quarter circle in the centre.
Double graduated scale.

Length Width Code
800 360 MESUM710

Alpha marking kit

Alpha marking kit
(MESU018-09)

The set of Alpha marking instruments includes high quality tools: beech wood bevel, slotted end and a carpenter's square made of seamless stainless steel with marking holes and graduated scales both sides of the long leg.

Made of stainless steel
Three top quality carpenter's tools in one
For all carpentry work
Permanent engraved graduation
Very flexible spring steel
Marking holes

Length Width Code
790 430 MESUM900D

Carpenter's kit in wooden box

Carpenter\'s kit in wooden box
(MESU018-10)

This marking and basic measuring kit for carpenters contains a carpenter's square, a mitre square and a bevel. The three measuring instruments all have a stainless steel blade. The excellent quality handles are made of walnut with brass hardware.

Stainless steel blade
Wear-resistant millimetre scale engraved on both sides of the steel blade
Brass hardware
With cap Reading and transfer of angles
Supplied in a wooden storage box

Length Angle Code
MESUA033

Square 170 x 100mm

Square 170 x 100mm
(MESU018-03)

Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.

Length Code
170x100mm MESU62081

Related products

STAINLESS STEEL engraved 35cm carpenter's ruler

STAINLESS STEEL engraved 35cm carpenter\'s ruler
(MESU018-05)

Very sturdy, made of stainless steel, 1.4 mm thick, the carpenter's ruler is graduated in cm from 0 to 35 then in mm from 0 to 150, engraved by deep acid etching on both sides.
350 mm long to measure in cm from 0 to 350 then in mm from 0 to 150.
The ruler has a matt anti-reflective coating and a hole centred at the end.

Length Code
350 MESU103011

Related products

Square 115 x 150mm

Square 115 x 150mm
(MESU018-04)

Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.

Length Code
115x150mm MESU62110

Related products

Diameter taper gauge

Diameter taper gaugeDiameter taper gaugeDiameter taper gauge
(MESU027-01)

A compact diameter taper gauge and ruler all in one.
Handy clip for depth measurement and to store the tool in your pocket.

Thickness : ​1.2mm 
Precision : 0.05mm 
Materiel : Stainless steel

Measure length Code
1-15mm MESU62600
15-30mm MESU62605

Diameter and radius gauge

Diameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gauge
(MESU027-02)

To measure radii, diameters, lengths and thicknesses. Easy to use thanks to its compact size.

Dimensions : 175 x 15 x 0.5 mm
Weight : 7.5 g

Measure length Code
150 MESU73570
150 MESU73571

Angle square 200 x 63mm

Angle square 200 x 63mmAngle square 200 x 63mm
(MESU019-01)

Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.

Length Code
200x63mm MESU62114

Related products

Angle square 168 x 63mm

Angle square 168 x 63mmAngle square 168 x 63mm
(MESU019-02)

Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.

Length Code
168x63mm MESU62113

Related products

Bevel scale with level 120 x 240mm

Bevel scale with level 120 x 240mm
(MESU020-01)

Tool for setting or placing battens. Can be used to reproduce a slope by steadying the relevant angle in degrees.

Length Code
120x240mm MESU78546

Related products

Digital bevel scale 107 x 230mm

Digital bevel scale 107 x 230mm
(MESU020-02)

Tool for measuring slopes. Quick reading.

Length Code
107x230mm MESU78545

Related products

Profile gauge

Profile gauge
(MESU021-01)

These models have perfectly sliding, effortless hardened steel pins in a graduated support. Very handy to take a moulding profile or make a cut.

Length Code
150mm MESU77970
300mm MESU77971

Digital thickness gauge

Digital thickness gauge
(MESU030-01)

Reading 1/10. Steel arm - ABS handle
also measures the thickness of brake pads (automotive industry)

Arm length: 138 mm
Total legngth: 313 mm
Handle length: 100 mm
Weight: 200 g

Code
MESU263005

Stair measuring tool

Stair measuring tool
(MESU031-01)

The stair measuring tool measures all shapes of steps. It is particularly suitable for making templates. All the gauges - 60, 80 or 100 cm - are connected to a central point to pivot.

To easily measure the shape of steps
Made of hardened steel

Length Angle Code
60 - 80 - 100 MESUT500

Angle template tool

Angle template tool
(MESU031-02)

The angle template tool is fully suited to transfer polygonal shape contours to parts. Working with an angle template tool is much easier than using a measuring tape or ruler giving rise to greater precision than paper templates. Several aluminium sliders can be connected to obtain various straight lines. The slidiers can be placed on top of one another to perform intermediate dimensions as required.

Allows polygonal contours to be transferred to various parts
Easy to measure compared to a measuring tape or ruler
More accurate than a paper template
Almost any shape can be reproduced thanks to the different aluminium sliders

Length Angle Code
MESUT510