Wood professionals

Discover our entire catalogue.

Leterring, "V" Groove and chamfer bits

Lettering router bits (60°)

Lettering router bits (60°)Lettering router bits (60°)
(CMT8-949B)

The ideal bit for routing signs. CMT has designed a bit with a 60° curved profile, a 3,2mm (1/8") radius and a flattened bottom to make relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and bevel the letter edges to eliminate aggravating splintering. The top bearing guide allows for even more precise decorative effects.

D l A L S Rotation Code
28 19 60° 63.5 12 DROITE With top bearing CMT94950211B
28.5 19 60° 63.5 12.7 DROITE With top bearing CMT84950111B

Lettering router bits (60°)

Lettering router bits (60°)Lettering router bits (60°)
(CMT7-8-949)

The ideal bit for routing signs. CMT has designed a bit with a 60° curved profile, a 3,2mm (1/8") radius and a flattened bottom to make relief letter-making easy and accurate. This exclusive design allows you to efficiently level off the area around the base of the letter and bevel the letter edges to eliminate aggravating splintering.

D l A L S Rotation Code
25.4 19 60° 50.8 6 DROITE CMT74900111
25.4 19 60° 50.8 6.35 DROITE CMT84900111
28 19 60° 63.5 12 DROITE CMT94950211
28.5 19 60° 63.5 12.7 DROITE CMT84950111

Bowl and tray router bits

Bowl and tray router bitsBowl and tray router bits
(CMT7-851B)

This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. Makes pattern work quick and easy. Bowl and tray bits with top bearings are great for pattern work. Use them to create raised sign lettering, trays and many other items.

D l R L S Rotation Code
19 16 6.4 54 6 DROITE With top bearing CMT75100211B
19 16 6.4 54 6.35 DROITE With top bearing CMT85100211B
19 16 6.4 60.4 12.7 DROITE With top bearing CMT85150111B
31.7 16 6.4 60.4 12 DROITE With top bearing CMT95150211B
31.7 16 6.4 60.4 12.7 DROITE With top bearing CMT85150211B

Related products

Bowl & tray router bits

Bowl & tray router bitsBowl & tray router bits
(CMT7-8-951)

This CMT bit is ideal for making bowls, trays, boxes, cutting boards or any other specialty or craft item. The round corner of the bit shapes the inner radius while the sides and bottom create the smooth flat surfaces. Makes pattern work quick and easy..

D l R L S Rotation Code
11.1 12.7 3.2 45.5 6.35 DROITE CMT85100111
19 16 6.4 54 6 DROITE CMT75100211
19 16 6.4 54 6.35 DROITE CMT85100211
19 16 6.4 54 8 DROITE CMT95100211
19 16 6.4 60.4 12 DROITE CMT95150111
19 16 6.4 60.4 12.7 DROITE CMT85150111
31.7 16 6.4 60.4 12 DROITE CMT95150211
31.7 16 6.4 60.4 12.7 DROITE CMT85150211

V-Grooving router bits (90°)

V-Grooving router bits (90°)V-Grooving router bits (90°)V-Grooving router bits (90°)
(CMT7-8-915)

These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Like all CMT bits, they are made of super strength Fatigue Proof® steel with carbide-tipped cutting edges and are coated with our trademark orange PTFE non-stick coating. These bits are ideal for routing signs, or almost any project that is suitable for accurate template routing.
Tips : V-grooving bits can perfectly chamfer 45°.
Items featuring 31,7mm (1-1/4") cutting diameters are suitable for plasterboard.

D l A L S Rotation Code
6 8 90° 38.1 6 DROITE CMT71506011
6 8 90° 38.1 8 DROITE CMT91506011
6.35 8 90° 38.1 6.35 DROITE CMT81506411
9.5 12.7 90° 44.5 6 DROITE CMT71509511
9.5 12.7 90° 44.5 6.35 DROITE CMT81509511
9.5 12.7 90° 44.5 8 DROITE CMT91509511
12.7 12.7 90° 44.5 6 DROITE CMT71512711
12.7 12.7 90° 44.5 6.35 DROITE CMT81512711
12.7 12.7 90° 44.5 8 DROITE CMT91512711
16 12.7 90° 52.8 8 DROITE CMT91516011
16 12.7 90° 63.5 12 DROITE CMT91566011
16 12.7 90° 63.5 12.7 DROITE CMT81566011
19 16 90° 55.5 6 DROITE CMT71519011
19 16 90° 63.5 12 DROITE CMT91569011
19 16 90° 63.5 12.7 DROITE CMT81569011
31.7 19 90° 63.5 8 DROITE CMT91531711
31.7 19 90° 63.5 12 DROITE CMT91581711
31.7 19 90° 63.5 12.7 DROITE CMT81581711
38 28.5 90° 63.5 8 DROITE CMT91538011
38 28.5 90° 70 12.7 DROITE CMT81588011

V-Grooving router bits (90°)

V-Grooving router bits (90°)V-Grooving router bits (90°)
(CMT7-8-915B)

These double cutting edge CMT bits offer an almost endless range of woodworking possibilities. Make clean, perfect cuts in panels, drawer fronts or even plasterboard panels; chamfer edges or engrave beautiful lettering. Top bearing allows for several template options. Like all CMT bits, they are made of super strength Fatigue Proof® steel with carbide-tipped cutting edges and are coated with our trademark orange PTFE non-stick coating. These bits are ideal for routing signs, or almost any project that is suitable for accurate template routing.
Tips : V-grooving bits can perfectly chamfer 45°. Two tools in one!

D l L A S Rotation Code
12.7 12.7 44.5 90° 6.35 DROITE CMT81512711B
16 12.7 52.8 90° 8 DROITE CMT91516011B
19 16 55.5 90° 6 DROITE CMT71519011B
19 16 63.5 90° 12.7 DROITE CMT81569011B

V-Grooving bits

V-Grooving bitsV-Grooving bits
(CMT915)

ALUCOBOND® plus composite panels can be shaped using a very simple processing method. The technique, called the routing and folding method, enables a fabricator to produce shapes of various kinds and sizes. A V-shaped groove is routed on the reverse side of the ALUCOBOND® plus composite panel using a "V" groove router bit. A thin layer of the core material should be left at the base of the groove, i.e. on the inside of the outer cover sheet. The untouched outer cover sheet can now be bent manually, giving an exact and clean folding line which follows the routed groove. The outer radius of the folded edge depends on the shape of the groove and its depth. We recommend that the routing be done using a CNC machining center, a portable sheet milling machine or a hand router. The routing and folding method can be used for ALUCOBOND® plus composite panels with all available standard surface finishes.
The advantages of this unique technique are:
- Low investment cost.
- Simple fabrication technique.
- Folding can be done on site, saving transportation cost.
- Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc.
- Flexibility in creating shapes.
- Very economical.
- Shapes are not limited by machine capacity.

D l A L S Rotation Code
18 7.4 90° 60 6 DROITE CMT71500111
18 7.4 90° 60 6.35 DROITE CMT81500111
18 7.4 90° 60 8 DROITE CMT91500111
18 3.3 135° 60 6 DROITE CMT71500211
18 3.3 135° 60 6.35 DROITE CMT81500211
18 3.3 135° 60 8 DROITE CMT91500211

Laser point router bits (35°)

Laser point router bits (35°)Laser point router bits (35°)Laser point router bits (35°)Laser point router bits (35°)Laser point router bits (35°)
(CMT7-8-958)

These new bits will allow you to make fine grooves and incisions with laser precision. Featuring bevel edges, these tools produce a nice effect in a single run. Raise the bits to make a fine point incision or bold highlighted lettering. The micrograin carbide cutting edge guarantees long-lasting performance.

D l A Z L S Rotation Code
6 9 35° 1 50 6 DROITE CMT75800211
6.35 9.5 35° 1 50.8 6.35 DROITE CMT85800211
12.7 11 60° 3 57.2 6 DROITE CMT75800111
12.7 11 60° 3 57.2 6.35 DROITE CMT85800111
12.7 11 60° 3 57.2 8 DROITE CMT95800111
12.7 11 60° 3 60.3 12.7 DROITE CMT85850111
12.7 10 60° 2 50.8 6.35 DROITE CMT85800311
12.7 10 60° 2 50.8 8 DROITE CMT95800311

V-grooving & signmaking router bits with indexable knives (90°)

V-grooving & signmaking router bits with indexable knives (90°)V-grooving & signmaking router bits with indexable knives (90°)V-grooving & signmaking router bits with indexable knives (90°)
(CMT665)

Conical scoring blade for digitally controlled machines, to cut the plated side of the panel and prevent splinters when formatting.

- Super strength steel.
- 1 HW precision insert knife (Z1).

wood, panels, plywood

A D l L S Rotation Code
90° 17 8.5 53 6.35 DROITE CMT66517111
90° 20 10 60 8 DROITE CMT66520011

Stepped rebate router bits

Stepped rebate router bitsStepped rebate router bits
(CMT965)

Router bits featuring 2 carbide-tipped cutting edges for producing double rebates on wood and wood composites. Designed for accepting library/bookcase shelving strips or for accommodating hardware into your window slots.

d D l L S Rotation Code
12.3 16.3 16 80 8 DROITE CMT96512211
12.7 19 15.9 50.8 8 DROITE CMT96512111

Chamfer bits

Chamfer bitsChamfer bits
(CMT703-4-5-903-4-5)

From a gently beveled edge to decorative chamfers in a variety of materials, CMT offers smooth results.

D l L S A Rotation Code
24 14 46 6 15° DROITE CMT70324011
24 14 46 8 15° DROITE CMT90324011
25 8 41 6 45° DROITE CMT70524011
25 8 41 8 45° DROITE CMT90524011
26 12.7 44.5 6 30° DROITE CMT70424011
26 12.7 44.5 8 30° DROITE CMT90424011

Chamfer bits with insert knives

Chamfer bits with insert knivesChamfer bits with insert knivesChamfer bits with insert knives
(CMT659-658)

Bevel and Chamfer trim bits with two replaceable knives fixed by special Torx screws. The knives are sharpened on all 4-sided sharpened and provide three extra new edges. Guided bevel and chamfer trim bits type 659 are equipped with the ball bearing guides. Type 658 is unguided. For specialist applications requiring economy of replaceable tips. For precision work on laminates, MDF or for quick rounded edges in hard wood. For use on portable Routers or CNC machining centers.

D l L S A Rotation Code
25 11 65 6 22° DROITE CMT65902411
25 11 65 6.35 22° DROITE CMT65902311
25 11 65 8 22° DROITE CMT65902211
28 10 66 6 30° DROITE CMT65903211
28 10 66 6.35 30° DROITE CMT65903111
28 10 66 8 30° DROITE CMT65903011
29 8 52 6 45° DROITE CMT65804711
29 8 52 8 45° DROITE CMT65804511
29 8 60 6 45° DROITE CMT65904711
29 8 60 6.35 45° DROITE CMT65904611
29 8 60 8 45° DROITE CMT65904511
29 8 68 12.7 45° DROITE CMT65964611

Chamfer router bits

Chamfer router bitsChamfer router bits
(CMT7-8-936-8-957)

CMT chamfer bits can cut clean, accurate bevels and chamfers and are great for edge work or for making perfectly aligned multi-sided containers, boxes and other decorative projects. See illustration below for examples. Can be used for working larger scale projects such as beams and columns with excellent results.

D l L S A Rotation Code
19 11.5 54.9 6 15° DROITE CMT73613011
19 11.5 54.9 6.35 15° DROITE CMT83613011
19 11.5 54.9 8 15° DROITE CMT93613011
21.5 22 71.1 12 11.25° DROITE CMT95750411
21.5 22 71.1 12.7 11.25° DROITE CMT85750411
22.2 10 54.9 6 25° DROITE CMT73619011
22.2 10 54.9 6.35 25° DROITE CMT83619011
22.2 10 54.9 8 25° DROITE CMT93619011
24.5 22 71.1 12 15° DROITE CMT95750311
24.5 22 71.1 12.7 15° DROITE CMT85750311
31 22 71.1 12 22.5° DROITE CMT95750211
31 22 71.1 12.7 22.5° DROITE CMT85750211
31.7 9.5 53 6 45° DROITE CMT73628011
31.7 9.5 53 6.35 45° DROITE CMT83628011
31.7 9.5 53 8 45° DROITE CMT93628011
38.5 22 71.1 12 30° DROITE CMT95750111
38.5 22 71.1 12.7 30° DROITE CMT85750111
45 18 60.2 6 45° DROITE CMT73642011
45 18 60.2 6.35 45° DROITE CMT83642011
45 18 60.2 8 45° DROITE CMT93642011
45 18 66.5 12 45° DROITE CMT93692011
45 18 66.5 12.7 45° DROITE CMT83692011
65 26 76.7 12 45° DROITE CMT93695011
65 26 76.7 12.7 45° DROITE CMT83695011

5 piece chamfer router bit set

5 piece chamfer router bit set5 piece chamfer router bit set
(CMT836)

Build beautiful planters, boxes and other multi-sided pieces with this handy set. Why cut imperfect angles on your table saw when it's so much easier and accurate to use the CMT Chamfer set? Our solution to accurate polygon construction includes 5 anti-kickback, carbide tipped bits in the most popular angles - 11-1/4°, 15°, 22-1/2°, 30° and 45°. No polygon project is too difficult. Available with 12,7mm (1/2") shank.

S Rotation Code
12.7 DROITE Chamfer set CMT83650111

Slot cutters

Slot cutters
(CMT8-922.016B)

Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, T-molding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and the trademarked orange non-stick PTFE coating.

l D H P L S Rotation Code
3 54 17.5 2.4 56 12.7 DROITE CMT82201611B
3 54 17.5 2.4 56 12 DROITE CMT92201611B