Wood professionals

Discover our entire catalogue.

Multiprofile bits

Multiprofile router bits

Multiprofile router bitsMultiprofile router bitsMultiprofile router bitsMultiprofile router bits
(CMT8-956.8)

Create endless profiles with CMT multiprofile bits. Simply adjust the height of the bit to create classic profiles in one single pass, or make more complex decorative effects in multiple passes. The bits super-strength steel body can withstand long-lasting cutting operations, and the micrograin carbide tips remain sharp longer for superior performance. In addition these bits feature baked-on non-stick PTFE coating and anti-kickback design. To be used on tables equipped with a fence.
Safety tips : to make small molding as shown below, cut the profile from very wide stock. Remove the excess material and work on the bigger piece to give you easier control. Keep hands far from the bit when working.

D l L S Rotation Code
55.6 47 96.4 12 DROITE Profil A CMT95680211
55.6 47 96.4 12.7 DROITE Profil A CMT85680211
38.1 28 77.5 12 DROITE Profil B CMT95680111
38.1 28 77.5 12.7 DROITE Profil B CMT85680111

Molding router bits

Molding router bitsMolding router bits
(CMT8-955.901)

Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own. With the wide range of decorative possibilities offered by CMT molding bits, you can always create the edge profile you want, anywhere you want and any time you want. These CMT bits are made to last a lifetime - carbide-tipped cutters and solid bar stock steel shanks can withstand serious use and the baked-on non-stick PTFE coating makes sure you continuously get clean, smooth-running cuts. Our anti-kickback feature helps guarantee you work more safely when using these wide profile bits.
Shop tips : multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin.
Safety tips : all large diameter bits such as these should be used with caution and on router tables equipped with a fence. For best results, 1,7 KW (2-1/4 HP) routers are recommended. Routers as low-powered as 1,1 KW (1-1/2 HP) can be used if limited to shorter, shallower runs. When possible, reduce the RPMs of the router for operations requiring the use of these bits.

D l L S Rotation Code
23.8 35 83.8 12 DROITE Profil A CMT95590111
23.8 35 83.8 12.7 DROITE Profil A CMT85590111

Molding router bits

Molding router bitsMolding router bits
(CMT8-955.902)

Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own. With the wide range of decorative possibilities offered by CMT molding bits, you can always create the edge profile you want, anywhere you want and any time you want. These CMT bits are made to last a lifetime - carbide-tipped cutters and solid bar stock steel shanks can withstand serious use and the baked-on non-stick PTFE coating makes sure you continuously get clean, smooth-running cuts. Our anti-kickback feature helps guarantee you work more safely when using these wide profile bits.
Shop tips : multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin.
Safety tips : all large diameter bits such as these should be used with caution and on router tables equipped with a fence. For best results, 1,7 KW (2-1/4 HP) routers are recommended. Routers as low-powered as 1,1 KW (1-1/2 HP) can be used if limited to shorter, shallower runs. When possible, reduce the RPMs of the router for operations requiring the use of these bits.

D l L S Rotation Code
27 41 90.2 12 DROITE Profil B CMT95590211
27 41 90.2 12.7 DROITE Profil B CMT85590211

Molding router bits

Molding router bitsMolding router bits
(CMT8-956.501)

Why waste time searching for a particular style of frame molding when you can just as quickly and easily make your own. With the wide range of decorative possibilities offered by CMT molding bits, you can always create the edge profile you want, anywhere you want and any time you want. These CMT bits are made to last a lifetime - carbide-tipped cutters and solid bar stock steel shanks can withstand serious use and the baked-on non-stick PTFE coating makes sure you continuously get clean, smooth-running cuts. Our anti-kickback feature helps guarantee you work more safely when using these wide profile bits.
Shop tips : multiple pass operations require advance planning. To avoid making a mistake that could render it impossible to finish the job, carefully consider the entire cutting sequence before you begin.
Safety tips : all large diameter bits such as these should be used with caution and on router tables equipped with a fence. For best results, 1,7 KW (2-1/4 HP) routers are recommended. Routers as low-powered as 1,1 KW (1-1/2 HP) can be used if limited to shorter, shallower runs. When possible, reduce the RPMs of the router for operations requiring the use of these bits.

D l L S Rotation Code
47.5 28.5 77.4 12 DROITE Profil C CMT95650111
47.5 28.5 77.4 12.7 DROITE Profil C CMT85650111

Molding router bits

Molding router bitsMolding router bits
(CMT8-967.5B)

CMT's new molding bits allow you to shape elegant moldings with your table saw and router. Unlike any commercially available crown moldings, moldings made with these bits are easy to install and create a finished appearance. After shaping the cove, you can use special router bits with inverted profiles to create different edges and complete the molding.

R D l L S Rotation Code
4 39.05 11.5 57 8 DROITE CMT96700111B
4 39.05 11.5 57 12 DROITE CMT96750111B
4 39.05 11.5 57 12.7 DROITE CMT86750111B
4 54 11.5 65.9 12 DROITE CMT96750211B
4 54 11.5 65.9 12.7 DROITE CMT86750211B
6.35 60.5 17.3 71.7 12 DROITE CMT96750311B
6.35 60.5 17.3 71.7 12.7 DROITE CMT86750311B

Molding router bits

Molding router bitsMolding router bits
(CMT8-967.6B)

CMT's molding bits allow you to shape elegant moldings with your table saw and router. Unlike any commercially available crown moldings, moldings made with these bits are easy to install and create a finished appearance. After shaping the cove, you can use special router bits with inverted profiles to create different edges and complete the molding.

R D l L S Rotation Code
6.35 38 12.5 57 8 DROITE CMT96710111B
6.35 38 12.5 57 12 DROITE CMT96760111B
6.35 38 12.5 57 12.7 DROITE CMT86760111B
8 35 13.2 57.7 8 DROITE CMT96710211B
8 35 13.2 57.7 12 DROITE CMT96760211B
8 35 13.2 57.7 12.7 DROITE CMT86760211B
9.5 38 14.5 59 8 DROITE CMT96710311B
9.5 38 14.5 59 12 DROITE CMT96760311B
9.5 38 14.5 59 12.7 DROITE CMT86760311B

Finger pull router bits

Finger pull router bitsFinger pull router bitsFinger pull router bitsFinger pull router bitsFinger pull router bits
(CMT855-955)

Why interrupt the subtle linearity of an all-wood drawer front or cabinet door with a metal knob or handle? Use a CMT finger pull bit and make a harmonious wooden handle. Choose your preference - a template profile made directly in the wood or a European-style hardwood pull.

D d T1 l R R1 L S Rotation Code
19.05 9.5 14 19.05 4.76 2.4 57.2 8 DROITE CMT95510211
19.05 9.5 14 19.05 4.76 2.4 57.2 12.7 DROITE CMT85560211
38.1 17 18 20.7 6 1.8 55.5 8 DROITE CMT95510311
38.1 17 18 20.7 6 1.8 61.8 12.7 DROITE CMT85560311
47.6 24 22 28.5 6.35 3.2 66.6 12 DROITE CMT95560111
47.6 24 22 28.5 6.35 3.2 66.6 12.7 DROITE CMT85560111

Window sill & finger pull router bits

Window sill & finger pull router bitsWindow sill & finger pull router bits
(CMT8-955.804-B)

Originally intended for shaping window sill edges, these bits are also used for creating finger pulls on your door and drawer edges.

R1 R D l L S Rotation Code
5.5 9.5 31.7 25.4 73 12 DROITE   CMT95580411
5.5 9.5 31.7 25.4 73 12.7 DROITE   CMT85580411
9.5 12.7 38.1 35 85.8 12 DROITE   CMT95580511
9.5 12.7 38.1 35 85.8 12.7 DROITE   CMT85580511
5.5 9.5 31.7 25.4 73 12 DROITE With top bearing CMT95580411B
5.5 9.5 31.7 25.4 73 12.7 DROITE With top bearing CMT85580411B
9.5 12.7 38.1 35 85.8 12 DROITE With top bearing CMT95580511B
9.5 12.7 38.1 35 85.8 12.7 DROITE With top bearing CMT85580511B

Table edge and hand rail router bits

Table edge and hand rail router bits
(CMT8-956.701)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
35 38 87 12 DROITE Profil B CMT95670111
35 38 87 12.7 DROITE Profil B CMT85670111

Table edge and hand rail router bits

Table edge and hand rail router bitsTable edge and hand rail router bits
(CMT8-956.601)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
63.5 19 67.9 12 DROITE Profil A CMT95660111
63.5 19 67.9 12.7 DROITE Profil A CMT85660111

Table edge and hand rail router bits

Table edge and hand rail router bits
(CMT8-956.702)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
31.7 38.1 87 12.7 DROITE Profil C CMT85670211
31.7 38.1 87 12 DROITE Profil C CMT95670211