Wood professionals

Discover our entire catalogue.

Solid surface bits

Solid surface rounding over bits

Solid surface rounding over bitsSolid surface rounding over bitsSolid surface rounding over bits
(CMT8-980.5)

Use these bits to create a traditional roundover edge on solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.

R l D L S Rotation Code
3.2 19.05 12.7 59.4 12 DROITE CMT98050111
3.2 19.05 12.7 59.4 12.7 DROITE CMT88050111
6.35 25.4 12.7 59.4 12 DROITE CMT98050211
6.35 25.4 12.7 59.4 12.7 DROITE CMT88050211
8 28.7 15 62.5 12 DROITE CMT98050511
8 28.7 15 62.5 12.7 DROITE CMT88050511
9.5 31.75 14 60.7 12 DROITE CMT98050311
9.5 31.75 14 60.7 12.7 DROITE CMT88050311
12.7 38.1 19.05 65.8 12 DROITE CMT98050411
12.7 38.1 19.05 65.8 12.7 DROITE CMT88050411

Solid surface decorative edge profile router bits

Solid surface decorative edge profile router bitsSolid surface decorative edge profile router bits
(CMT8-980.521)

Create elegant countertops with flawless results. Features a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.

D l R L S Rotation Code
66.7 41.3 8 89.8 12 DROITE CMT98052111
66.7 41.3 8 89.8 12.7 DROITE CMT88052111

Solid surface rounding over bowl router bits

Solid surface rounding over bowl router bitsSolid surface rounding over bowl router bits
(CMT8-966.601-602-8-980.541)

These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 880.551.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges. Special angled Delrin® sleeve on the bearing of the CMT bevel cutter lets you work without leaving marks on the workpiece. Trims and shapes all wood and wood materials. Perfect for kitchen and bathroom counter top work.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

A D T1 l R L S Rotation Code
15° 50.8 19 25.4 12.7 74.9 12 DROITE CMT96660111
15° 50.8 19 25.4 12.7 74.9 12.7 DROITE CMT86660111
15° 50.8 25.4 31.75 12.7 81.3 12 DROITE CMT96660211
15° 50.8 25.4 31.75 12.7 81.3 12.7 DROITE CMT86660211
18° 54 19 25.4 12.7 78.1 12.7 DROITE CMT88054111
18° 54 25.4 31.75 12.7 78.1 12 DROITE CMT98054111

Solid surface rounding over bowl router bits (ogee profile)

Solid surface rounding over bowl router bits (ogee profile)Solid surface rounding over bowl router bits (ogee profile)
(CMT8-980.542)

These bits roundover and trim the countertop edges after the bowl is mounted. Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush cut-out between the countertop and installed undermount bowl. For use on hand-held portable routers. Features a non-marring Delrin® bearing to protect the finished edges.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

A D T1 l R L S Rotation Code
15° 54 19 25.4 6.35-12.7 77.6 12 DROITE CMT98054211
15° 54 19 25.4 6.35-12.7 77.6 12.7 DROITE CMT88054211

Solid surface bevel bowl bits

Solid surface bevel bowl bitsSolid surface bevel bowl bits
(CMT8-966.501-8-980.551)

These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11 and 880.542.11 for complete undermount applications. For use on hand-held routers. Features a non-marring Delrin® bearing to protect the finished edges.
Special angled Delrin® sleeve on the bearing of the CMT bevel cutter lets you work without leaving marks on the workpiece. Trims and shapes all wood and wood materials. Perfect for kitchen and bathroom counter top work.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

A D l L S Rotation Code
10° 28.5 25.4 77 12 DROITE CMT98055111
10° 28.5 25.4 77 12.7 DROITE CMT88055111
15° 31.7 22.2 72 12 DROITE CMT96650111
15° 31.7 22.2 72 12.7 DROITE CMT86650111

Solid surface bevel router bits

Solid surface bevel router bitsSolid surface bevel router bits
(CMT8-981.521)

Edge profile bit designed to create a 15° bevel on solid surface countertops. Can also be used for European type topmount installation with sinks and bowls. For use on hand-held portable routers.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D d l A L S Rotation Code
23 9.52 25.4 15° 63.5 12 DROITE CMT98152111
23 9.52 25.4 15° 63.5 12.7 DROITE CMT88152111

Solid surface cut and plug repair set

Solid surface cut and plug repair setSolid surface cut and plug repair set
(CMT9-881.541)

Special carbide-tipped bits to be used on solid surface for repairing your ruined surfaces. To repair, create the plug with the plug cutter first, then use the other bit to easily make the hole. Your surfaces will look like new. To be used on hand-held routers or CNC machines.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D1 D2 l A L1 L2 S Rotation Code
47.6 63.5 20 15° 68.5 74 12 DROITE CMT98154111
47.6 63.5 20 15° 68.5 74 12.7 DROITE CMT88154111

4-wing cut out slot cutters for solid surface

4-wing cut out slot cutters for solid surface4-wing cut out slot cutters for solid surface
(CMT8-922.033B)

Tools featuring specially formulated carbide-tipped cutting edges for cutting your solid surface undermount bowls. For use on hand-held portable routers. Bits feature a non-marring Delrin® bearing to protect your surfaces.

Ideal for use with all composite materials:
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l H L S Rotation Code
92 6.35 27.3 82.5 12 DROITE CMT92203311B
92 6.35 27.3 82.5 12.7 DROITE CMT82203311B

Solid surface no-drip router bits

Solid surface no-drip router bitsSolid surface no-drip router bits
(CMT8-981.501)

This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l l1 R L S Rotation Code
25.4 12.7 3.2 8 63.5 12 DROITE CMT98150111
25.4 12.7 3.2 8 63.5 12.7 DROITE CMT88150111

Solid surface no-drip router bits

Solid surface no-drip router bitsSolid surface no-drip router bits
(CMT8-980.531)

This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D d l l1 R L S Rotation Code
25.4 19 22.2 15.87 8 77 12 DROITE CMT98053111
25.4 19 22.2 15.87 8 77 12.7 DROITE CMT88053111

Solid surface wavy joint router bits

Solid surface wavy joint router bitsSolid surface wavy joint router bits
(CMT8-981.531)

These bits are ideal for making strong joints on any solid surface, thanks to a wider area for glue.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l R L S Rotation Code
15.87 51.5 4.36 89 12 DROITE CMT98153111
15.87 51.5 4.36 89 12.7 DROITE CMT88153111

Solid surface drainboard router bits

Solid surface drainboard router bitsSolid surface drainboard router bits
(CMT8-981.511-512)

This bit is ideal for creating custom drainboard patterns in solid surface countertops. For use on hand-held portable routers.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l R L S Rotation Code
15.87 12.7 3.2 63.5 12 DROITE CMT98151111
15.87 12.7 3.2 63.5 12.7 DROITE CMT88151111
25.4 12.7 3.2 69.8 12 DROITE CMT98151211
25.4 12.7 3.2 69.8 12.7 DROITE CMT88151211

Solid surface inlay router bits

Solid surface inlay router bitsSolid surface inlay router bitsSolid surface inlay router bits
(CMT8-980.511-512-513)

Add a decorative wood, plastic or metal inlay to solid surface countertops. Equipped with a non-marring Delrin® bearing to protect the finished edges. For use on hand-held portable routers.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l H L S Rotation Code
22.2 6.35 4.76 77 12 DROITE CMT98051111
22.2 6.35 4.76 77 12.7 DROITE CMT88051111
22.2 12.7 4.76 90 12 DROITE CMT98051211
22.2 12.7 4.76 90 12.7 DROITE CMT88051211
22.2 19.05 4.76 90 12 DROITE CMT98051311
22.2 19.05 4.76 90 12.7 DROITE CMT88051311

Solid surface sink and trim bits

Solid surface sink and trim bitsSolid surface sink and trim bits
(CMT8-980.57)

Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. These "overhang" bits are equipped with Delrin ® bearings that are tapered to match the slope of the bowl's side.

D l A L S Rotation Code
19.05 25.4 78 12 DROITE CMT98057111
19.05 25.4 78 12.7 DROITE CMT88057111
22 25.4 10° 78 12 DROITE CMT98057211
22 25.4 10° 78 12.7 DROITE CMT88057211

Solid surface sink and trim bits with insert knives and Delrin® bearing

Solid surface sink and trim bits with insert knives and Delrin® bearingSolid surface sink and trim bits with insert knives and Delrin® bearing
(CMT8-980.56)

Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. These "overhang" bits are equipped with Delrin ® bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation. Equipped with special super micrograin carbide insert knives for longer lifetime. The blades are 2 sided sharpened and can give extra new edges.

D l A L S Rotation Information Code
19.05 30 83 12 DROITE Profil A CMT98056111
19.05 30 83 12.7 DROITE Profil A CMT88056111
22 30 10° 83 12 DROITE Profil B CMT98056211
22 30 10° 83 12.7 DROITE Profil B CMT88056211