Bits with carbide knives
Adjustable grooving cutter head with knives Z2 + 2, V2 + 2
- Grooving cutting head for solid wood and panels of all kinds (coated or non-coated)
- Steel body with reversible carbide knives on 4 cutting edges
- Two-piece, adjusted by spacers
- Recommended for routers and CNC machines
- MEC / mechanical feed
D | H | S | Code |
---|---|---|---|
110 | 5.0-10 | 30 | ELME110530 |
120 | 5.0-10 | 30 | ELME120530 |
Flush trim and surfacing bits with Z3 knives
- Bit with reversible 4-sided carbide knives for fast rebating, flush trimming and surfacing large surface areas
- Suitable for soft and hardwood and all kinds of panels
- Recommended for routers and CNC machines
- MEC / mechanical feed
D | l | L | Z | S | Code |
---|---|---|---|---|---|
50 | 12 | 90 | 3 | 16 | ELPS121690 |
80 | 12 | 90 | 3 | 20 | ELPS122090 |
100 | 12 | 90 | 3 | 25 | ELPS122590 |
Spoilboard surfacing router cutters with insert knives






New router bit for CNC router ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF. The cutter uses 4-sided inserts. Cost effective solution compared to brazed router bits and solid carbide spiral bits.
TECHNICAL FEATURES :
- Super strength steel.
- 3 cutting edges (Z3).
D | l | L | S | Rotation | Code |
---|---|---|---|---|---|
38 | 12 | 60 | 12x35 | DROITE | CMT66300511 |
80 | 12 | 90 | 20x60 | DROITE | CMT66300311 |
Z2 glue joint tongue and groove cutter head
Non-reversible carbide knives with positioning stop for quick and precise positioning + an eccentric ring for lateral adjustment of the knives for the glue joint, depending on the species of wood processed.
Prof. N° | D | H | l | S | Code |
---|---|---|---|---|---|
1 | 55 | 18-38 | 40 | 25x55 | ELPA020100 |
2 | 55 | 15-28 | 30 | 25x55 | ELPA020200 |
3 | 55 | 25-38 | 40 | 25x55 | ELPA020300 |
4 | 55 | 28-48 | 50 | 25x55 | ELPA020400 |
5 | 71 | 35-58 | 60 | 25x55 | ELPA020500 |
Sizing roughing cutter head Z2 + 2
- Roughing cutter head with HW knives to size soft and hardwood as well as coated or non-coated panels
- Reversible knives with 4 cutting edges, spread over 4 spirals for optimum chip removal and flow
- Suitable for routers and CNC machines
- MEC / mechanical feed
D | I | L | Z | S | Code | |
---|---|---|---|---|---|---|
50 | 50 | 100 | 2+2 | 20x50 | Right | ELPC505020-D |
50 | 50 | 100 | 2+2 | 20x50 | Left | ELPC505020-G |
Sizing and rebate cutter head Z2 + 2
- Cutter head to straighten, size and rebate solid wood and various panels
- Particularly suitable for curved woodwork or chair legs
- 2+2 alternating mitre cuts with 4-sided reversible carbide knives, helically mounted on 4 divisions + 2 spurs in the lower part
- Optimised helix angle and clean cut for high feed rates
- To be mounted on cutter arbor Ø30 x 60
- Max. rotation speed 18,000 rpm
- MEC / mechanical feed
D | l | B | Z | Code |
---|---|---|---|---|
80 | 85 | 30 | 2+2 | ELPC808530AL |
Universal profile cutter for cnc machines





For universal profiling of solid wood on CNC router machines.
For cutting width 40mm and 50mm ( serie 690).
Profile knives may only be ordered and used in pairs.
For router machines with mechanical feed.
Technical Details :
- Super Strenght Steel.
- 2 cutting edges (Z2) for knives 40x4mm e 50x4mm.
D | l1 | l2 | L | S | Rotation | Code |
---|---|---|---|---|---|---|
65 | 40 | 50 | 93 | 20 | DROITE | CMT66330111 |
Folding and chamfer bits with Z1 knives
V-groove - Folding - Signmaking CNC Router Cutter






This innovative CNC router bit offers you an endless range of possibilities for V-Groove, miter folds, signmaking, lettering and chamfer edges. The tool mounts a high grade HWM reversible knife ideal for general purpose, chipboard and plywood, but a higher quality is available for laminated and MDF material.
TECHNICAL DETAILS :
- Super-strength steel.
- 1 cutting edge (Z1).
D | l | L | S | A | Rotation | Code |
---|---|---|---|---|---|---|
35 | 42 | 125 | 20 | 45° | DROITE | CMT66310311 |
42 | 35 | 115 | 20 | 60° | DROITE | CMT66310211 |
52 | 25 | 102 | 20 | 91° | DROITE | CMT66310111 |
60 | 21 | 95 | 20 | 110° | DROITE | CMT66311011 |
87 | 24 | 95 | 20 | 120° | DROITE | CMT66312011 |
91 | 20.2 | 95 | 20 | 130° | DROITE | CMT66313011 |
96.5 | 12.4 | 95 | 20 | 150° | DROITE | CMT66315011 |
45° chamfer cutter head with Z2 knives
Adjustable angle cutter head with Z2 knives
Adjustable Chamfering CNC Cutter






For jointing, rebating and chamfering of solid wood and wooden boards. Suitable for CNC router machines and stationary router machine with manual or mechanical feed.
TECHNICAL DETAILS :
Tool body in steel, two TC reversible knives in swiveling blade carriers. Cutting on periphery and both sides. Swiveling range towards top 0-45°, toward bottom 0-90°, infinitely variable adjustment according to precise scale. With positive stops at 7,5° through adjustment aide. No displacement of adjusted beveling angle when replacing blades. Right rotation.
Inclination :
Min. -45° Max. +90°
D | D max 45° | l | A | L | S | Rotation | Code |
---|---|---|---|---|---|---|---|
85 | 102 | 39.5 | 0°-45° - 0°+90° | 92 | 20 | DROITE | CMT66320111 |
Related products
Wedges for 663.201.11
Code | |
---|---|
38x6x12mm wedge for knife | CMT66399901 |
Kit with 2 wedges and 1 screw for blocking rotation | CMT66399902 |
Related products
Facing, roundover or chamfer bits with Z1 + 1 knives
- For facing, rounding or chamfering, top and bottom, in all sorts of wood and panels
- Using the same body (size 1 or 2) you can mount interchangeable carbide knives for chamfering or rounding with different radii
- Peripheral cutting only, no front edge cutting
- MEC / mechanical feed - Insert knives not supplied
D | d | L | S | Rotation | Code |
---|---|---|---|---|---|
34 | 20 | 113 | 20x55 | DROITE | ELME500100 |
34 | 20 | 113 | 25x55 | DROITE | ELME500200 |
57 | 35 | 150 | 25x55 | DROITE | ELME500400 |
34 | 20 | 113 | 25x55 | GAUCHE | ELME500300 |
Roundover or chamfer bits with Z2 knives
- For roundover or chamfer profiles, top and bottom, in all kinds of wood or panels
- Cutter head with knives that can be changed for roundover and chamfer profiles using the same cutter head
- MEC / mechanical feed
D | L | S | R | A | Code |
---|---|---|---|---|---|
40 | 100 | 16x60 | 2 | ELME215200 | |
40 | 100 | 16x60 | 3 | ELME215300 | |
40 | 100 | 16x60 | 4 | ELME215400 | |
40 | 100 | 16x60 | 45° | ELME215450 | |
40 | 100 | 16x60 | 5 | ELME215500 |
Handrail profile cutter head Z2 + 2 standard profiles
- Profiled cut with standard profiled knives
D | H | S | Code |
---|---|---|---|
100 | 69 | 25x80 | ELPO028650 |
Router cutter for decorating





This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
Knife for router cutter





Knifes 20x20x2mm.
Code |
---|
CMT616001 |
CMT616002 |
CMT616003 |
CMT616004 |
CMT616005 |
CMT616006 |
CMT616007 |
CMT616008 |
CMT616009 |
CMT616010 |
CMT616011 |
CMT616012 |
CMT616013 |
CMT616014 |
CMT616015 |
CMT616016 |
CMT616017 |
CMT616018 |
CMT616019 |
CMT616020 |
CMT616021 |
CMT616022 |
Related products
Complete set for decorating on mdf





This unique system includes a tool body with 22 profile knives designed for multiple applications on your CNC routers. Ideal for MDF, laminates, veneers, plastic, wood and solid surface materials.
TECHNICAL FEATURES :
- 20x20x2mm knives.
- We recommend to resharpen the knives on the profiled cutting edges.
S | Rotation | Code |
---|---|---|
20 | DROITE | CMT61600001 |
MDF door bit bodies





Extremely precise bits to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and the highest quality tungsten materials.
D | d2 | L | S | Rotation | Code | |
---|---|---|---|---|---|---|
62 | 38 | 95 | 20 | DROITE | CMT615620A | |
35 | 90 | 20 | DROITE | CMT615350C | ||
50 | 95 | 20 | DROITE | CMT615500B | ||
20 | 85 | 20 | DROITE | CMT615200D | ||
For CMT615620A | CMT615A1 | |||||
For CMT615350C | CMT615C1 | |||||
For CMT615500B | CMT615B1 | |||||
For CMT615200D | CMT615D1 | |||||
For CMT615620A | CMT615A2 | |||||
For CMT615350C | CMT615C2 | |||||
For CMT615500B | CMT615B2 | |||||
For CMT615200D | CMT615D2 | |||||
For CMT615620A | CMT615A3 | |||||
For CMT615350C | CMT615C3 | |||||
For CMT615500B | CMT615B3 | |||||
For CMT615620A | CMT615A4 | |||||
For CMT615350C | CMT615C4 | |||||
For CMT615500B | CMT615B4 | |||||
For CMT615620A | CMT615A5 | |||||
For CMT615350C | CMT615C5 |
Complete set for mdf doors





Open some new doors with CMT. Our 4-piece set includes the most popular profile to make MDF panel doors for kitchens and bathrooms. Each bit is made from bar stock steel and is equipped with 5 different profile knives allowing enormous possibilities for easy and economical construction. The highest materials, the lowest tolerance in balancing and the precision in the sharpening of the knives let you obtain a smooth finish on your CNC machine.
S | Rotation | Code | |
---|---|---|---|
20 | DROITE | Profil no. 1 | CMT61500401 |