Wood professionals

Discover our entire catalogue.

Mono-function cutter head series: Raised panel bits

Mono-function cutter head series: Raised panel bits
(ZAKP.O-FRAISE-5)

Raised panel bit with double profile reversible carbide tips

D d Code
150 30 Profile 501-521 ZAK123501
150 30 Profile 501-521-502-531-532-533 ZAK123505

Related products

(EC-02)

D L For collet Code
42 20 ER25 ELEC00101D
50 25 ER32 ELEC00201D
63 28 ER40 ELEC00301D

(CREMONE-01)

Code
ELPU066460

Spoilboard surfacing router cutters with insert knives

Spoilboard surfacing router cutters with insert knivesSpoilboard surfacing router cutters with insert knives
(CMT663)

New router bit for CNC router ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut. Used on soft and hardwood, particle board and MDF. The cutter uses 4-sided inserts. Cost effective solution compared to brazed router bits and solid carbide spiral bits.

TECHNICAL FEATURES :
- Super strength steel.
- 3 cutting edges (Z3).

D l L S Rotation Code
38 12 60 12x35 DROITE CMT66300511
80 12 90 20x60 DROITE CMT66300311

3 in 1 flush trim bits for MDF/laminates

3 in 1 flush trim bits for MDF/laminates3 in 1 flush trim bits for MDF/laminates
(CMT7-8-907)

Perfect trimming with the conical edges!
Thanks to the innovative conical edges of this bit you will always get perfect cuts even after re-sharpening. In fact, the most popular problem you have with the standard flush trim bits is the undersize diameter after re-sharpening which leaves the mark on the material; now with the new CMT construction you could re-sharpen up to six times without any problem. Just remember to adjust your bit up or down.

3 in 1 new flush trim bits with Delrin® triangular bearings are your best partner for laminate trimming. In fact they solve 3 of the most common problems that occur in flush trimming in cabinet shops.
- 1) The anti-stick properties of the Delrin® bearing greatly reduces the likelihood of freezing of the bearing from glue.
- 2) The extended guide surface of the new Delrin® bearing will perfectly match the work surface without scratching like the steel bearing would. The Delrin® bearing also guarantees maximum stability.
- 3) The shear angle cutting edge reduces the need for filing.
3 in 1 bits are ideal on plastic laminates as well as aluminium laminates!
Bearing is patented. Patent no. D628,218.
- Extended guide surface.
- Non-freezing.
- Non-scratch surface.

l D L S Rotation Code
12.7 12.7 54.2 6 DROITE CMT70712811
15.87 19 59.3 6 DROITE CMT70719011
12.7 12.7 54.2 6.35 DROITE CMT80712811
15.87 19 59.3 6.35 DROITE CMT80719011
15.87 19 59.3 8 DROITE CMT90719011
15.87 19 65.7 12.7 DROITE CMT80769011

Replacement sanding band for sanding drum

Replacement sanding band for sanding drum
(FRAI-PONCEUR-TOILE)

D H Grain Code
80 120 40 PONB12025140
80 120 60 PONB12025160
80 120 80 PONB12025180
80 120 100 PONB120251100
80 120 120 PONB120251120
145 120 40 PONB12045040
145 120 60 PONB12045060
145 120 80 PONB12045080
145 120 100 PONB120450100

Twisted slot mortising bits with chipbreaker

Twisted slot mortising bits with chipbreaker
(CMT160)

For cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks.

TECHNICAL DETAILS :
- Long-lasting cutting performance.
- 2 HS precision ground twisted cutting edges with chip breaker (Z2R).
- RPM 3000-5000

D l L S Rotation Code
16 110 170 13 GAUCHE CMT16016032

T-slot router bits

T-slot router bitsT-slot router bitsT-slot router bitsT-slot router bitsT-slot router bits
(CMT8-950.6)

With the CMT T-slot bits you can make holes that keep your frames, plaques or any wall hanging perfectly straight and attached to the wall. These bits bore an entry hole in the wood, then proceed to cut holes and finished by boring a larger opening under the surface. The perfect way to securely mount wall hangings on screws and nails.
Safety tips : be sure the workpiece is securely fastened to the router table or work bench.
Shop tips : recommended for use with a plunge router.

D d l L Z S Rotation Code
28 11 13.5 56.3 2 12 DROITE CMT95060311
28 11 13.5 56.3 2 12.7 DROITE CMT85060311
30 9.5 17.5 60.3 2 12 DROITE CMT95060111
30 9.5 17.5 60.3 2 12.7 DROITE CMT85060111
32 8.7-15 20 66 1+1 12 DROITE CMT95060411
34.9 12.7 22.2 63.5 2 12 DROITE CMT95060211
34.9 12.7 22.2 63.5 2 12.7 DROITE CMT85060211

Jig saw blades JT101AO

Jig saw blades JT101AO
(JT101AO)

Curved cuts, fine finishing on both sides of surface on hard/soft woods, plywood, chipboard, MDF, double sided laminates from 1,5mm to 15mm (1/16"~3/4").

hard/soft woods, plywood, chipboard, MDF, double sided laminates

l L TS Packaging Code
50 76 1.4 5 CMTJT101AO-5

Twisted slot mortising bits with chipbreaker

Twisted slot mortising bits with chipbreaker
(CMT161)

For cutting mortise slots in soft and hardwood. Used on machining centres equipped with chucks.

TECHNICAL DETAILS:
- Long-lasting cutting performance.
- 2 HS precision ground twisted cutting edges with chip breaker (Z2R).
- RPM 3000-5000

D l L S Rotation Code
16 110 170 16 DROITE CMT16116031
16 110 170 16 GAUCHE CMT16116032

Sabre saw blade JS1025VF

Sabre saw blade JS1025VF
(JS1025VF)

For cutting medium-thick to thick sheet metal from 2mm to 10mm (5/64" - 3/8") in thickness, thin to thick-walled pipe and profiles with less than 150mm (6") in thickness. Ideal for demolition work on metal. Effortless fine cut.

L l H K TS Packaging Code
200 180 19 1.25 1.8-2.6 5 CMTJS1025VF-5

Solid carbide dowel drills

Solid carbide dowel drillsSolid carbide dowel drillsSolid carbide dowel drills
(CMT311.21-22)

Used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plastic and laminated materials.

TECHNICAL DETAILS :
- Premium quality super-strength steel.
- HWM spiral portion with centre point.
- 2 cutting edges (Z2).
-
- 2 spiral flutes.
- 2 curved, negatively ground spurs (V2).
- Parallel shank with driving flat and adjustable screw length.

D l L S Rotation Code
1.3 5 70 10x45 DROITE / GAUCHE CMT31101320
2 12 70 10x40 DROITE CMT31102021
3 18 70 10x40 DROITE CMT31103021
4 27 70 10x28 DROITE CMT31104021
5 30 70 10x30 DROITE CMT31105021
6 30 70 10x30 DROITE CMT31106021
6.35 (1/4") 30 70 10x30 DROITE CMT31106421
8 35 70 10x25 DROITE CMT31108021
10 35 70 10x25 DROITE CMT31110021
2 12 70 10x40 GAUCHE CMT31102022
3 18 70 10x40 GAUCHE CMT31103022
4 27 70 10x28 GAUCHE CMT31104022
5 30 70 10x30 GAUCHE CMT31105022
6 30 70 10x30 GAUCHE CMT31106022
6.35 (1/4") 30 70 10x30 GAUCHE CMT31106422
8 35 70 10x25 GAUCHE CMT31108022
10 35 70 10x25 GAUCHE CMT31110022

Table edge and hand rail router bits

Table edge and hand rail router bits
(CMT8-956.701)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
35 38 87 12 DROITE Profil B CMT95670111
35 38 87 12.7 DROITE Profil B CMT85670111

Sabre saw blade JS1122BF

Sabre saw blade JS1122BF
(JS1122BF)

For cutting thick sheet metal from 3mm to 8mm (1/8" - 5/16") in thickness, solid pipe and profiles with less than 175mm (7") in diameter. Flexible flush cut, quick cut.

L l H K TS Packaging Code
225 205 19 0.90 1.8 5 CMTJS1122BF-5
225 205 19 0.90 1.8 20 CMTJS1122BF-20

Ovolo sash router bit sets

Ovolo sash router bit setsOvolo sash router bit setsOvolo sash router bit setsOvolo sash router bit setsOvolo sash router bit sets
(CMT955.302-855.802)

These bits allow you to make true divided light doors for fine furniture and cabinets as well as sash bar windows, and rail and stile constructions. The glazing bar ovolo bits are bearing-guided to enable curved frames to be molded. Cove bits can be used to produce easy-to-pull drawer handles.

d D l R S Rotation Code
30 31.7 12 6.35 8 DROITE CMT95530211
30 31.7 12 6.35 12.7 DROITE CMT85580211

Collets for chucks 123

Collets for chucks 123
(CMT124)

Collets for chucks 123.

D3 Code
6 CMT12406000
6.35 CMT12406400
8 CMT12408000
9.5 CMT12409500
10 CMT12410000
12 CMT12412000
12.7 CMT12412700
14 CMT12414000

Sabre saw blade JS1122VF

Sabre saw blade JS1122VF
(JS1122VF)

For cutting wood with nails or metal with less than 175mm (7"), sheet metal, aluminium profiles from 3mm to 10mm (1/8" - 3/8") in thickness, glass fibre reinforced plastic/epoxy with less than 175mm (7") in thickness. Flexible flush cut.

L l H K TS Packaging Code
225 205 19 0.90 1.8-2.6 5 CMTJS1122VF-5

Adaptors

Adaptors
(CMT305)

For use on the following machines :
Biesse (older models).
Masterwood (Zangheri & Boschetti).
Morbidelli, Torwegge, Vitap (new design).
Weeke.

TECHNICAL FEATURES :
- High precision and total reliability.
- Perfectly centred.
- Defect-free rotation.
- Super-strength steel.
- Precision relief on all surfaces.
- Quick drill change.
- Adaptable to many different spindle nose designs.

B D S Rotation Code
8 16 M10/11 DROITE CMT30508001
10 19.5 M10/11 DROITE CMT30500001
8 16 M10/11 GAUCHE CMT30508002
10 19.5 M10/11 GAUCHE CMT30500002

6 piece mortising bit sets

6 piece mortising bit sets
(CMT102-172)

Ideal for heavy mortise jobs. Made of super strength high speed steel and available in left-hand or right-hand rotation. Safely packaged in a hardwood and glass box for protection, these sets are economical and a perfect addition to any workshop.

S Rotation Code
16 DROITE Ø6-8-10-12-14-16 CMT10200100
16 GAUCHE Ø6-8-10-12-14-16 CMT10200110
13 DROITE Ø6-8-10-12-14-16 CMT17200100
13 GAUCHE Ø6-8-10-12-14-16 CMT17200110

(RAV034-01)

D H B Z Code
94 90 30 2 ELBD460930
120 90 50 2 ELBD460950

Slot cutters with 45° bore

Slot cutters with 45° boreSlot cutters with 45° bore
(CMT823)

These three wing carbide tipped slot cutters feature anti-kickback three wing blade design and CMT's trademark orange PTFE Industrial Coating. All cutters feature an 8mm (5/16") bore that fits CMT's arbors (items 7/8/924).

l P D B Code
3 1.27 47.6 8 CMT82333011
3.2 1.27 47.6 8 CMT82333211
4 2.07 47.6 8 CMT82334011
5 2.68 47.6 8 CMT82335011
6.4 4.45 47.6 8 CMT82336411

Bracket Delta sanding pad, perforated - 93mm

Bracket Delta sanding pad, perforated - 93mm
(CMTOMM-OMS-30)

APPLICATION :
Quick, easy sanding sheet changes. Perfectly sanded surfaces for all conditions of material with the comprehensive range of sanding sheets.

W Packaging Code
93 1 Universal CMTOMM30-X1
93 1 Fit Fein® SuperCut / Festool® Vecturo CMTOMS30-X1

Solid surface no-drip router bits

Solid surface no-drip router bitsSolid surface no-drip router bits
(CMT8-981.501)

This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l l1 R L S Rotation Code
25.4 12.7 3.2 8 63.5 12 DROITE CMT98150111
25.4 12.7 3.2 8 63.5 12.7 DROITE CMT88150111

Cooling wax for diamond dry hole saws

Cooling wax for diamond dry hole saws
(CMT552-WAX)

Wax for perfect cooling and lubrication.

(MORT006-02)

e E L P pitch Code
2.50 6-7 40 150 A MORT0204
4.00 8-12 40 150 A MORT0206
4.00 8-12 50 150 A MORT0207
9.00 13-20 40 150 A MORT0208
9.00 13-20 50 150 A MORT0209
13.50 22-25 40 150 A MORT0210
13.50 22-25 50 150 A MORT0211
22.50 30 40 150 A MORT0212
22.50 30 50 150 A MORT0213

5 steel Pieces boring bit set for hinges

5 steel Pieces boring bit set for hinges
(CMT512-COFFRET2)

Used for drilling blind holes in solid wood, wood composites and plastic laminated materials. Ideal for hinges.

TECHNICAL DETAILS:
- SP steel.
- 2 spurs (V2).
- 2 precision ground cutting edges (Z2).
- Long-lasting cutting performance.
The perfect set for hinge work and other related applications. Machined from special high speed steel, these bits are available in diametres of 15, 20, 25, 30 and 35mm. Precisely ground, sharpened with round shanks and safely packaged in a solid plastic box with glass front for easy storage and inventory.

S L Rotation Code
10 90 DROITE D15-20-25-30-35 CMT51200100

V-grooving & signmaking router bits with indexable knives (90°)

V-grooving & signmaking router bits with indexable knives (90°)V-grooving & signmaking router bits with indexable knives (90°)V-grooving & signmaking router bits with indexable knives (90°)
(CMT665)

Conical scoring blade for digitally controlled machines, to cut the plated side of the panel and prevent splinters when formatting.

- Super strength steel.
- 1 HW precision insert knife (Z1).

wood, panels, plywood

A D l L S Rotation Code
90° 20 10 60 8 DROITE CMT66520011

6 piece profile router bit set with wooden case

6 piece profile router bit set with wooden case6 piece profile router bit set with wooden case
(CMT800.504)

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
Containing 6 of CMT's most frequently used 12,7mm (1/2") shank router bits, this compact Italian hardwood case is beautiful and convenient for your woodworking needs. All the bits contained feature the finest steel and carbide, plus CMT's baked-on orange PTFE non-stick coating.

S Rotation Code
12.7 DROITE CMT80050411

Routing bits 2 cuts M12 int. thread

Routing bits 2 cuts M12 int. threadRouting bits 2 cuts M12 int. thread
(FOZ2C-04)

Reversible milling cutter 2 cuts, 30mm cutting height, straight cut.

D l L S Code
15.5 30 73 M12 FOZ2CM1215573
16 30 73 M12 FOZ2CM121673
18 30 73 M12 FOZ2CM121873
20 30 73 M12 FOZ2CM122073
22 30 73 M12 FOZ2CM122273
24 30 73 M12 FOZ2CM122473
25 30 73 M12 FOZ2CM122573

45 mm Precision cut, Japanese toothing for wood. Long life

45 mm Precision cut, Japanese toothing for wood. Long life45 mm Precision cut, Japanese toothing for wood. Long life
(CMTOMF206)

FEATURES : Bi-metal 8% Cobalt with "Japanese" double row pattern. Guaranteed long life.
MATERIAL : Wood up to 50mm, plasterboard and soft plastics.
APPLICATION : Plunge easily at any point in the material. Medium width for maximum precision and speed. Hight cutting quality and a wide range of applications.

W l TS TPI Packaging Code
45 50 1.75 14 1 CMTOMF206-X1
45 50 1.75 14 5 CMTOMF206-X5
45 50 1.75 14 50 CMTOMF206-X50

Straight router bits with insert knives

Straight router bits with insert knivesStraight router bits with insert knives
(CMT651-652)

Ideal for fast plunge cuts and other grooving applications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood.

D l L S Rotation Code
8 20 60 6.35 DROITE CMT65107911
9.5 30 70 6.35 DROITE CMT65109511
12.7 30 70 6.35 DROITE CMT65112711
8 20 60 8 DROITE CMT65108011
10 30 70 8 DROITE CMT65110011
12 30 70 8 DROITE CMT65112011
14 30 73 8 DROITE CMT65114011
8 20 67 12 DROITE CMT65108111
10 30 80 12 DROITE CMT65110111
12 30 80 12 DROITE CMT65112111
12 50 103 12 DROITE CMT65212111
8 20 67 12.7 DROITE CMT65168111
9.5 30 80 12.7 DROITE CMT65169511
10 30 80 12.7 DROITE CMT65170111
12 30 80 12.7 DROITE CMT65172111
12 50 103 12.7 DROITE CMT65262111
12.7 30 80 12.7 DROITE CMT65172711
12.7 50 103 12.7 DROITE CMT65262811

"USAG" C-spanner

\
(CMT991-01)

"USAG" C-spanner 40-42 / 58-62-65 / 95-100.

Dim. Code
40-42 CMT99112300
58-62-65 CMT99128300
95-100 CMT99128400

Related products

ISO30 chuck with precision collet "ER32"

ISO30 chuck with precision collet \
(CMT183.220)

Chucks 183.220 for Alberti and Masterwood machines.

S Collet Retaining stud Rotation Code
ISO30 ER32 12.8-9 DROITE CMT18322001
ISO30 ER32 12.8-9 GAUCHE CMT18322002

Related products

Cavetto edge mold router bits

Cavetto edge mold router bitsCavetto edge mold router bits
(CMT7-8-963.7-8-964)

The cavetto bit cuts beautiful, traditional profiles, but you may also use just a portion of the bit to cut a more simple and cleaner cove edge. This bit add a special touch to furniture pieces by making traditional cove profiles with top and bottom fillet grooves in any kind of wood and wood composites.
Important : always assemble the black bearing heat shield with the raised side up when changing the bearing. Improper assembly will cause the screw to come loose and the bearing to fall off when routing.

R D l L S Rotation Code
4.8 25.4 11.5 52.8 6 DROITE CMT76404811
4.8 25.4 11.5 52.8 6.35 DROITE CMT86404811
4.8 25.4 11.5 52.8 8 DROITE CMT96404811
4.8 25.4 11.5 54.6 6 DROITE CMT76304811
4.8 25.4 11.5 54.6 6.35 DROITE CMT86304811
4.8 25.4 11.5 54.6 8 DROITE CMT96304811
4.8 25.4 11.5 59.1 12 DROITE CMT96454811
4.8 25.4 11.5 60.9 12 DROITE CMT96354811
4.8 25.4 11.5 59.1 12.7 DROITE CMT86454811
4.8 25.4 11.5 60.9 12.7 DROITE CMT86354811
8 31.7 14.3 55.1 6 DROITE CMT76408011
8 31.7 14.3 55.1 6.35 DROITE CMT86408011
8 31.7 14.3 55.1 8 DROITE CMT96408011
8 31.7 14.3 56.9 6 DROITE CMT76308011
8 31.7 14.3 56.9 6.35 DROITE CMT86308011
8 31.7 14.3 56.9 8 DROITE CMT96308011
8 31.7 14.3 61 12 DROITE CMT96458011
8 31.7 14.3 61 12.7 DROITE CMT86458011
8 31.7 14.3 63 12 DROITE CMT96358011
8 31.7 14.3 63 12.7 DROITE CMT86358011

Angle tongue and groove cutter heads

Angle tongue and groove cutter headsAngle tongue and groove cutter heads
(FRAI039)

For 45° tongue and groove.

Ø B d Z Code
180 50 50 3+3 FRAI0303

Related products

(RAV002-02)

D H B Z Code
120 10 30 2 ELPR003110
150 10 30 2 ELPI003A30

Jig saw blades JT101B

Jig saw blades JT101B
(JT101B)

Fine straight cuts on hard/soft woods, plywood, OSB and plastics from 3mm to 30mm (1/8"~1-1/4"). Plunge cutting.

hard/soft woods, plywood, OSB and plastics

l L TS Packaging Code
75 100 2.5 5 CMTJT101B-5
75 100 2.5 25 CMTJT101B-25

2 Flute dowel drills for through holes

2 Flute dowel drills for through holes2 Flute dowel drills for through holes
(CMT367)

Used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials.
For panels with maximum 20-25mm in thickness.

TECHNICAL DETAILS :
- Super-strength steel.
- Spiral portion coated with orange or black P.T.F.E.
- HW head with precision balanced centre point.
- 2 precision ground cutting edges (Z2).
- 2 spiral flutes.
- Parallel shank with driving flat and length adjusting screw.

D l L S Rotation Code
5 30 56 8x20 DROITE CMT36705011
5 30 56 8x20 GAUCHE CMT36705012
8 30 56 8x20 DROITE CMT36708011
8 30 56 8x20 GAUCHE CMT36708012

Saw blade arbor with parallel shank

Saw blade arbor with parallel shank
(CMT183.410)

- Extreme precision and reliability.
- Perfect tool centering.
- Defect-free rotation.
- Made from extremely high resistant steel.
- Precision grinding on all jointed parts.
- Extreme high rotation performance 15 HP – 20.000 RPM.
- For very efficient sizing on extreme unprecedented high feed speed.
- Excellent finishing quality on the workpiece and longer tool life.
- Sturdy design with reduced height to increase the work space between the machine and the piece.
- Safe and fast tool setup.
- Interchangeable collet clamps with radial grooves for secure parallel tool clamping.
- Wide clamping tolerance (-0.7mm).
- Right or left-hand rotation chucks with self clamping threads.
- Clamping nut with Woodruff radial grooves for c-spanners.
- Practical withdrawal sleeves with double differential threads for the chuck spindle.
- Central hexagonal low profile for easy tool clamping through a c-spanner.
- Designed and tested in collaboration with the most renowned machining and CNC router construction centres.
- Delivered in smart professional packaging.

S D d TE L Code
20 59 30 4/M6/48 97.5 CMT18341030

Classical ogee router bits

Classical ogee router bitsClassical ogee router bits
(CMT7-8-944)

CMT's classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece. A vertical bead was added to separate the curves and creates an eye-catching shape.
Ship tips : for best results, multiple passes are recommended.

R D l S Rotation Code
4 28.7 13 6 DROITE CMT74428711
4 28.7 13 6.35 DROITE CMT84428711
4 28.7 13 8 DROITE CMT94428711
4 28.7 13 12 DROITE CMT94478711
4 28.7 13 12.7 DROITE CMT84478711
6.4-4.8 35 18.5 6 DROITE CMT74435011
6.4-4.8 35 18.5 6.35 DROITE CMT84435011
6.4-4.8 35 18.5 8 DROITE CMT94435011
6.4-4.8 35 18.5 12 DROITE CMT94485011
6.4-4.8 35 18.5 12.7 DROITE CMT84485011

Multi profile cutter head series: Moulding cutter head with projection of 10 mm - Profile and counter profile

Multi profile cutter head series: Moulding cutter head with projection of 10 mm - Profile and counter profile
(ZAKVARI.PROFIL-1)

This set of magnetic positioners allows you to align your cutters in your holders according to their diameter.

D d Code
150 30 Body supplied bare for 3 profiles (200, 220, 230) ZAK153210
160 50 Body supplied bare for 3 profiles (200, 220, 230) ZAK165210
150 30 Body supplied bare for 3 C-profiles (700, 720, 730) ZAK153710
160 50 Body supplied bare for 3 C-profiles (700, 720, 730) ZAK165710

Related products

(PH035-01)

D H B Z Position Code
150 20 50 3 DESSUS ELPH035305
180 35 50 3 DESSUS ELPH035315
150 20 50 3 DESSOUS ELPH035310
180 35 50 3 DESSOUS ELPH035320

(PR001-01)

D H B Z Code
140 4 50 2+2+2+2 ELPR001005
140 5 50 2+2+2+2 ELPR001010
140 6 50 2+2+2+2 ELPR001015
140 8 50 2+2+2 ELPR001020
140 10 50 2+2+2 ELPR001025
140 12 50 2+2+2 ELPR001030

Solid carbide upcut spiral bits for locksets

Solid carbide upcut spiral bits for locksetsSolid carbide upcut spiral bits for locksetsSolid carbide upcut spiral bits for locksets
(CMT195-02)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges (Z3) and chipbreaker (Z3R).
- Max tooth depth: 0.3mm.
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.
- Seat for Seeger ring (not included).

D l l1 L S Rotation Code
14 45 95 150 14 DROITE With chip-breaker CMT19514211
14 45 125 170 14 DROITE With chip-breaker CMT19514411
16 45 95 150 16 DROITE With chip-breaker CMT19516211
16 45 95 150 16 DROITE Without chipbreaker CMT19316211
16 50 120 170 16 DROITE With chip-breaker CMT19516411
18 45 95 150 18 DROITE With chip-breaker CMT19518211

(RAV019-01)

D B Z R Code
153 30 2 8+10+12+15 ELCOF308101215

Drill Bits with 45° countersink set

Drill Bits with 45° countersink setDrill Bits with 45° countersink set
(CMT521A)

Used for drilling holes in soft, hardwood and wood composites.

d D A S Rotation Code
3 12 45° 8 DROITE CMT52131211A
4 12 45° 8 DROITE CMT52141211A
5 16 45° 10 DROITE CMT52151611A
6 16 45° 10 DROITE CMT52161611A

Rabeting cutter heads

Rabeting cutter headsRabeting cutter heads
(FRAI106)

For rabeting on CN.

D l S Z Code
50 30 20 2+2 FRAI2104530
50 50 20 2+2 FRAI2104550

Diamond router cutters with shear angle

Diamond router cutters with shear angleDiamond router cutters with shear angle
(CMT141)

TECHNICAL DETAILS :
- Super strength steel.
- DP cutting edge.
- HW plunging tip for diagonal plunge-cutting.
- Resharpenable cutter (max 3 times).
- Max feed speed 4 m/min.

D l L S Z Rotation Code
6 8 65 12x40 1 DROITE CMT14106061
8 12 65 12x40 1 DROITE CMT14108061
10 22 75 12x40 1+1 DROITE CMT14110161

(PK025-01)

D B Z Avt Position Code
300 50 2+2 15 DESSUS ELPK025025
300 50 2+2 20 DESSUS ELPK025030
300 50 2+2 15 DESSOUS ELPK025035
300 50 2+2 20 DESSOUS ELPK025040

File-free flush trim router bits for laminates

File-free flush trim router bits for laminatesFile-free flush trim router bits for laminates
(CMT8-907)

This new CMT's bit is perfect for ensuring smooth flawless results on your laminate surfaces after flush trimming. Sharp edges are easily trimmed away, leaving your surfaces nice and smooth to the touch. No further filing is needed !

D l R L S Rotation Code
12.7 9.5 0.4 52 6.35 DROITE CMT80700411
12.7 9.5 1.6 52 6.35 DROITE CMT80701511
12.7 9.5 0.4 52 8 DROITE CMT90700411
12.7 9.5 1.6 52 8 DROITE CMT90701511

6 piece mortising bit sets

6 piece mortising bit sets
(CMT160-161-SET)

Ideal for heavy mortise jobs. Made of super strength high speed steel and available in left-hand or right-hand rotation. Safely packaged in a hardwood and glass box for protection, these sets are economical and a perfect addition to any workshop.

TECHNICAL DETAILS :
- Long-lasting cutting performance.
- 2 HS precision ground twisted cutting edges with chip breaker (Z2R).
- RPM 3000-5000

S Rotation Code
16 GAUCHE D: 6-8-10-12-14-16mm CMT16100110
16 DROITE D: 6-8-10-12-14-16mm CMT16100100
13 DROITE D: 6-8-10-12-14-16mm CMT16000100
13 GAUCHE D: 6-8-10-12-14-16mm CMT16000110

Table edge and hand rail router bits

Table edge and hand rail router bitsTable edge and hand rail router bits
(CMT8-956.601)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
63.5 19 67.9 12 DROITE Profil A CMT95660111
63.5 19 67.9 12.7 DROITE Profil A CMT85660111

(PB011-03)

D H B Z Code
155 20 A 50 50/60 2 ELPB011005

Finger joint router bits

Finger joint router bitsFinger joint router bits
(CMT8-900.616)

This router allows you to carry out accurate and functional finger joints in a much easier way. Without any adjustment you will be able to work woods with different thicknesses as indicated in the drawing. The bearing allows you to reach a 9,5mm (3/8") cutting depth. For further cutting depths you need to use a fence.

T1 D H L S Rotation Code
12-40 47.6 9.5 97 12 DROITE CMT90061611
12-40 47.6 9.5 97 12.7 DROITE CMT80061611

Dowel drills

Dowel drillsDowel drills
(CMT311.41-42)

Used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plastic and laminated materials.

TECHNICAL DETAILS :
- Premium quality super-strength steel.
- Spiral portion coated with orange or black P.T.F.E.
- Extra-fine micrograin carbide spiral portion with centre point.
- 2 cutting edges (Z2).
- 2 spiral flutes.
- 2 curved, negatively ground spurs (V2).
- Parallel shank with driving flat and adjustable screw length.

D l L S Rotation Code
5 35 70 10x30 DROITE CMT31105041
6 35 70 10x30 DROITE CMT31106041
7 35 70 10x30 DROITE CMT31107041
8 35 70 10x30 DROITE CMT31108041
9 35 70 10x30 DROITE CMT31109041
10 35 70 10x30 DROITE CMT31110041
5 35 70 10x30 GAUCHE CMT31105042
6 35 70 10x30 GAUCHE CMT31106042
7 35 70 10x30 GAUCHE CMT31107042
8 35 70 10x30 GAUCHE CMT31108042
9 35 70 10x30 GAUCHE CMT31109042
10 35 70 10x30 GAUCHE CMT31110042

Sabre saw blade JS1122EF

Sabre saw blade JS1122EF
(JS1122EF)

For cutting thin sheet metal from 1,5mm to 4mm (1/16" - 5/32"), pipe and profiles with less than 175mm (7") in diameter. Flexible flush cut.

L l H K TS Packaging Code
225 205 19 0.90 1.4 5 CMTJS1122EF-5
225 205 19 0.90 1.4 20 CMTJS1122EF-20

Aluminium-oxide delta sandpaper for wood, perforated - 93mm

Aluminium-oxide delta sandpaper for wood, perforated - 93mm
(CMTOMA30)

APPLICATION :
Suitable for sanding all types of wood, chipboard, plywood, construction boards, for pre-sanding of rough, uneven beams and boards. Best result achieved with dust extractor. Aluminium-Oxide abrasive grain and full resin bond guarantee high abrasion performance.

FEATURES :
Delta Sandpaper with micro Velcro®-type to be use with our sku #OMM30 and #OMS30.

W Grit Packaging Code
93 40 10 CMTOMA30040-X10
93 60 10 CMTOMA30060-X10
93 80 10 CMTOMA30080-X10
93 100 10 CMTOMA30100-X10
93 120 10 CMTOMA30120-X10
93 180 10 CMTOMA30180-X10
93 240 10 CMTOMA30240-X10

Adaptors

Adaptors
(CMT360.001)

For use on the following machines:
Biesse machines with quick drill change attachment.

TECHNICAL FEATURES :
- High precision and total reliability.
- Perfectly centred.
- Defect-free rotation.
- Super-strength steel.
- Precision relief on all surfaces.
- Quick drill change.
- Adaptable to many different spindle nose designs.

B D Rotation Code
10 20 DROITE CMT36000101
10 20 GAUCHE CMT36000102

Arbors for slot cutters 823

Arbors for slot cutters 823Arbors for slot cutters 823
(CMT7-8-924-2)

S Rotation Code
6 DROITE Slot cutter arbor without bearing without stop collar CMT72406100
6 DROITE Slot cutter arbor without bearing without stop collar CMT82406100
6 DROITE Slot cutter arbor without bearing without stop collar CMT72406110
6.35 DROITE Slot cutter arbor without bearing without stop collar CMT82406110
8 DROITE Slot cutter arbor without bearing without stop collar CMT92408100
8 DROITE Slot cutter arbor without bearing without stop collar CMT92408110
12.7 DROITE Slot cutter arbor without bearing without stop collar CMT82412100
12.7 DROITE Slot cutter arbor without bearing without stop collar CMT82412110

Sabre saw blade JS1222VF

Sabre saw blade JS1222VF
(JS1222VF)

For cutting wood with nails or metal with less than 250mm (10"), sheet metal, aluminium profiles from 3mm to 10mm (1/8" - 3/8"), in thickness, glass fibre reinforced plastic/epoxy with less than 250mm (10") in thickness. Flexible flush cut.

L l H K TS Packaging Code
300 280 19 0.90 1.8-2.6 5 CMTJS1222VF-5

Upcut spiral bits with chipbreaker for glue-laminated wooden beams

Upcut spiral bits with chipbreaker for glue-laminated wooden beams
(CMT195-03)

Used for cutting, copying, and routing on glue-laminated wooden beams. To be inserted on Hundegger machines.

TECHNICAL FEATURES :
- High speed cobalt steel.
- 3 upcut spiral cutting edges with chipbreaker (Z3R).
- Upward chip ejection.
- Resharpenable (max. 6000~10000 times).
- Maximum feed speed 2m/minute.

D l L S Rotation Code
30 170 235 30 DROITE CMTY19530051
40 165 235 30 DROITE CMT19540051
50 215 295 30 DROITE CMT19550051

Diamond router cutters with negative shear angle

Diamond router cutters with negative shear angleDiamond router cutters with negative shear angle
(CMT141.NEG)

TECHNICAL DETAILS :
- Special super-micrograin carbide formulation
- Straight cutting edge.
- DP "H3".
- Resharpenable cutter (max 3 times).
- Feed speed on MDF 3-4 m/min for cutter Ø6 and Ø8mm and 4-5m/minute for Ø10and Ø12mm

D l L S Z Rotation Code
6 10 60 6 1 Neg. DROITE CMT14126061
8 10 65 6 1 Neg. DROITE CMT14128061
10 15 65 10 1 Neg. DROITE CMT14130061
12 20 70 12 1 Neg. DROITE CMT14132061

Solid surface no-drip router bits

Solid surface no-drip router bitsSolid surface no-drip router bits
(CMT8-980.531)

This bit is designed to create "no-drip" edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a guide bearing cannot be used. This one bit will cut both the outer and inner profiles creating slightly raised edge, controlling spilled liquids.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D d l l1 R L S Rotation Code
25.4 19 22.2 15.87 8 77 12 DROITE CMT98053111
25.4 19 22.2 15.87 8 77 12.7 DROITE CMT88053111

Adjustable grooving cutter by spacing rings

Adjustable grooving cutter by spacing rings
(FRAI004)

For making grooves.

Ø H d Z Code
140 4/7.5 50 4+4 FRAI0003
140 5/9.8 50 4+4 FRAI0004
140 10/20 50 4+4 FRAI0005
160 5/10 50 4+4 FRAI0256
160 10/20 50 4+4 FRAI0508

Stepped rebate router bits

Stepped rebate router bitsStepped rebate router bits
(CMT965)

Router bits featuring 2 carbide-tipped cutting edges for producing double rebates on wood and wood composites. Designed for accepting library/bookcase shelving strips or for accommodating hardware into your window slots.

d D l L S Rotation Code
12.3 16.3 16 80 8 DROITE CMT96512211
12.7 19 15.9 50.8 8 DROITE CMT96512111

Slot and mortise boring bits

Slot and mortise boring bits
(CMT164-1)

For drilling blind holes in solid wood, wood composites, plastic and laminated materials. Used on slot and mortise machines equipped with chucks.

TECHNICAL DETAILS :
- Super strength steel.
- HW cutting head with precision balanced centre point.
- 2 HW precision ground cutting edges (Z2).
- 2 negatively ground spurs (V2).

D L S Rotation Code
18 100 M12X1 DROITE CMT16418011
20 100 M12X1 DROITE CMT16420011
22 100 M12X1 DROITE CMT16422011

(MORT008-02)

e E pitch Code
2.50 6/7 A MORT0214
4.00 8/12 A MORT0215
9.00 13/20 A MORT0216
13.50 22/25 A MORT0217
22.50 30 A MORT0218

Entry & interior door router bit sets

Entry & interior door router bit setsEntry & interior door router bit setsEntry & interior door router bit setsEntry & interior door router bit sets
(CMT8-900.527)

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. The included tenon cutter produces a beefy 27mm (1-1/16") long tenon. Coupled with the cope cutter, you can produce long and strong tenons with minimum setup. As an extra bonus the tenon cutter can be used for furniture making requiring any tenon from 4,7mm (3/16") to 16mm (5/8") thick.

S Rotation Code
12 DROITE CMT90052711
12.7 DROITE CMT80052711

Straight router bits with insert knives for laminates

Straight router bits with insert knives for laminatesStraight router bits with insert knives for laminates
(CMT652)

Straight trimmer bits with one replaceable knife fixed by Torx screw. For economical specialist application requiring low down-time. The 29,5x9x1,5mm knife provide a 40mm (1-37/64") cutting length when operating in multiple passes. For routing, trimming and grooving on board materials (laminated chipboards, worktop panels and MDF). For use on portable routers.

D l L S Rotation Code
12 29.5 79 8 DROITE CMT65212011
12 39.5 90 8 DROITE CMT65212211
14 50 96 12 DROITE CMT65214111
16 50 96 12 DROITE CMT65216111
12.7 29.5 89 12.7 DROITE CMT65262711

Related products

(RAV040-01)

D B Z Code
120 30 2 ELBD474312
130 30 2 ELBD474313
140 30 2 ELBD474314
150 30 2 ELBD474315
160 30 2 ELBD474316
170 30 2 ELBD474317
180 30 2 ELBD474318
200 30 2 ELBD474320
230 30 2 ELBD474323
250 30 2 ELBD474325
140 50 2 ELBD474514
150 50 2 ELBD474515
160 50 2 ELBD474516
170 50 2 ELBD474517
180 50 2 ELBD474518
200 50 2 ELBD474520
230 50 2 ELBD474523
250 50 2 ELBD474525

C-spanner for "ER32" & "ER40" precision collets

C-spanner for \
(CMT991-02)

C-spanner for "ER32" & "ER40" precision collets.

Dim. Code
ER32 CMT99118300
ER40 CMT99118400

Related products

ISO30 chuck with precision collet "ER40"

ISO30 chuck with precision collet \
(CMT183.201)

Chucks 183.201 for Biesse machines.

Pair of universal adapters

Pair of universal adapters
(CMTOMA31)

Hardwearing universal adaptor allowing you to attach your CMT multi-tool blades that do not have matching shanks.
Fits snugly and does not slip.
Ideal for Bosch, Chicago, Craftsman, Dremel, Fein, Makita, Milwaukee, Mastercraft, Ozito, Aeg, Rigid, Rockwell, Smart, Worx.

Packaging Code
2 CMTOMA31-X2

Case suitable for hole saws

Case suitable for hole sawsCase suitable for hole sawsCase suitable for hole saws
(CMT55-SET)

Plastic case for CMT Hole saws
Case sold empty, image used is only indicative
03.01.0293 cm 46 x 23 x 9
03.01.0297 cm 49 x 41 x 12

DIM Code
46x23x9 Big plastic box suitable for hole saws 28/50 pz CMT03010297
49x41x12 Small case suitable for hole saws 25/42 pcs CMT03010296

Related products

Jig saw blades JT101BR

Jig saw blades JT101BR
(JT101BR)

Straight cuts, fine finishing on the surface, on hard/soft woods, plywood, OSB, laminated panels, plastics from 3mm to 30mm (1/8"~1-1/4"). Reverse tooth.

hard/soft woods, plywood, OSB, laminated panels, plastics

l L TS Packaging Code
75 100 2.5 5 CMTJT101BR-5
75 100 2.5 25 CMTJT101BR-25

(RAV005-01)

D H B Z Code
150 20/39.5 30 4+4 ELPF006150.S
170 20/39.5 30 4+4 ELPF006170.S
180 20/39.5 30 4+4 ELPF18302040L

2 Flute dowel drills for through holes

2 Flute dowel drills for through holes2 Flute dowel drills for through holes
(CMT368)

Used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites, plastic and laminated materials.
For panels with maximum 35-40mm in thickness.

TECHNICAL DETAILS :
- Super-strength steel.
- Spiral portion coated with orange or black P.T.F.E.
- HW head with precision balanced centre point.
- 2 precision ground cutting edges (Z2).
- 2 spiral flutes.
- Parallel shank with driving flat and length adjusting screw.

D l L S Rotation Code
5 43 70 8x20 DROITE CMT36805011
5 43 70 8x20 GAUCHE CMT36805012
6 43 70 8x20 DROITE CMT36806011
6 43 70 8x20 GAUCHE CMT36806012
7 43 70 8x20 DROITE CMT36807011
7 43 70 8x20 GAUCHE CMT36807012
8 43 70 8x20 DROITE CMT36808011
8 43 70 8x20 GAUCHE CMT36808012

Pattern/flush trim router bits with insert knives

Pattern/flush trim router bits with insert knivesPattern/flush trim router bits with insert knives
(CMT657B)

Flush trim bit combined with pattern bits fixed by special Torx screws. The blades are two-sided sharpened and can give extra new edges. 657 guided flush trim bits are equipped with top and bottom ball bearing guides. For flush and finish operations.

D l L S Rotation Code
19 30 90 8 DROITE CMT65719111B
19 50 110 12 DROITE CMT65799311B
19 60 120 12 DROITE CMT65799511B
19 30 90 12.7 DROITE CMT65769211B
19 50 110 12.7 DROITE CMT65799411B
19 60 120 12.7 DROITE CMT65799611B

Classical ogee router bits

Classical ogee router bitsClassical ogee router bits
(CMT7-8-945)

CMT's classical ogee bits feature an inverted ogee profile, with the concave edge adjacent to the upper surface of the workpiece. A vertical bead was added to separate the curves and creates an eye-catching shape.
Shop tips : for best results, multiple passes are recommended.

R D l S Rotation Code
4 28.7 13 6 DROITE CMT74528711
4 28.7 13 6.35 DROITE CMT84528711
4 28.7 13 8 DROITE CMT94528711
4 28.7 13 12 DROITE CMT94578711
4 28.7 13 12.7 DROITE CMT84578711
6.4-4.8 35 18.5 6 DROITE CMT74535011
6.4-4.8 35 18.5 6.35 DROITE CMT84535011
6.4-4.8 35 18.5 8 DROITE CMT94535011
6.4-4.8 35 18.5 12 DROITE CMT94585011
6.4-4.8 35 18.5 12.7 DROITE CMT84585011

Multi profile cutter head series: Moulding cutter head with projection of 15 mm - Profile and counter profile

Multi profile cutter head series: Moulding cutter head with projection of 15 mm - Profile and counter profile
(ZAKVARI.PROFIL-2)

This set of magnetic positioners allows you to align your cutters in your holders according to their diameter.

D d Code
150 30 Body supplied bare for 6 profiles (205, 222, 226, 231, 245,254) ZAK153215
150 30 Body supplied bare for 6 C-profiles (705, 722, 726, 731, 745,754) ZAK153715
160 50 Body supplied bare for 6 C-profiles (705, 722, 726, 731, 745,754) ZAK165715

Related products

(EU8020-01)

D H Use Code
120 80 ABOUTAGE DROITE ELPU802141
120 80 ABOUTAGE GAUCHE ELPU802140

Drill Bits with 90° countersink set

Drill Bits with 90° countersink setDrill Bits with 90° countersink set
(CMT515A)

Used for drilling holes in soft, hardwood and wood composites.

d D D2 S Rotation Code
4 10 12 10 DROITE CMT51541211A
4 12 14 10 DROITE CMT51541411A
5 14 15 10 DROITE CMT51551511A
6 12 14 10 DROITE CMT51561411A
6 14 15 10 DROITE CMT51561511A

5 Piece Forstner bit set

5 Piece Forstner bit set5 Piece Forstner bit set
(CMT537-COFFRET)

We offer a wide range of Forstner bits in the most popular diametres. These bits are available separately or in beautiful wooden sets. The high performance stagger tooth design on the bits with larger diametres allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless drills and suitable to work on any type of softwood.
Bits available with the following diameters : 15-20-25-30-35mm.
TIPS AND WARNINGS :
- Making repeated shallow cuts and allowing the bit to cool for two or three seconds between passes will increase the life of your bit. Overheating caused by chip buildup or constant contact with the cutting surface will remove the temper from the bit's cutting edges.
- You can also extend the life of your bits by not exceeding the maximum speed recommended for the type of wood. Applying excessive force to the bit while drilling will also cause overheating
- Remove all the chips from the previous hole before boring a second or subsequent hole when mortising.
- Small Forstner bits can be used in a hand drill, but the results are usually less than satisfactory. Using bits larger than 19mm (3/4") in a hand drill can cause injury when the bit hangs on an imperfection in the wood.
- Always wear proper eye and hearing protection when working with power tools.

D Rotation Code
Ø8-10mm DROITE 5 pcs. Router Bit Set in clamshell
Bit diameter : Ø15-20-25-30-35mm
CMT53700005
Ø8-10mm DROITE 12 pcs. Router Bit Set in clamshell
Bit diameter : Ø10-12-14-15-16-18-20-22-25-26-30-35mm
CMT53700012
Ø3/8" DROITE 4 pcs. Router Bit Set in clamshell
Bit diameter : Ø1/4" - 1/2" - 3/4" - 1"
CMT53700004
3/8" DROITE 7 pcs. Router Bit Set in clamshell
Bit diameter : Ø1/4" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" - 1"
CMT53700007
Ø3/8" DROITE 16 pcs. Router Bit Set in plastic box
Bit diameter : Ø1/4" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" - 1" - 1-1/8" - 1-1/4" - 1-3/8" - 1-1/2" - 1-5/8" - 1-3/4" - 1-7/8" - 2" - 2-1/8"
CMT53700016

(PM025-01)

D B Z Avt Position Code
160 50 2 15 DESSUS ELPM025005
170 50 2 20 DESSUS ELPM025010
160 50 2 15 DESSOUS ELPM025015
170 50 2 20 DESSOUS ELPM025020

(PG040-01)

D H B Z Code
165 50 50 2 ELPG040005
165 60 50 2 ELPG040010
165 80 50 2 ELPG040090

(RAV025-01)

D B Z Code
140 30 1+1/2+2 ELLB002600

Chamfer bits

Chamfer bitsChamfer bits
(CMT703-4-5-903-4-5)

From a gently beveled edge to decorative chamfers in a variety of materials, CMT offers smooth results.

D l L S A Rotation Code
24 14 46 6 15° DROITE CMT70324011
24 14 46 8 15° DROITE CMT90324011
25 8 41 6 45° DROITE CMT70524011
25 8 41 8 45° DROITE CMT90524011
26 12.7 44.5 6 30° DROITE CMT70424011
26 12.7 44.5 8 30° DROITE CMT90424011

Sabre saw blade JS1111DF

Sabre saw blade JS1111DF
(JS1111DF)

For cutting wood with nails or metal, chipboard with less than 175mm (7") in thickness, plastic profiles with less than 175mm (7") in diameter, glass fibre reinforced plastic/epoxy with less than 50mm (2") in thickness.

L l H K TS Packaging Code
225 205 19 1.25 4.3 5 CMTJS1111DF-5
225 205 19 1.25 4.3 20 CMTJS1111DF-20

Table edge and hand rail router bits

Table edge and hand rail router bits
(CMT8-956.702)

Turn a small investment into a big return with these CMT bits! They give you well-proportioned smooth curves for elegant eye-catchy work on your tables. CMT hand rail bits feature 30° bevel edge and 3,2mm (1/8") bead that allow you to make beautiful and functional hand rails. Add a touch of class to your architectural settings!
Safety tips : these profile bits remove large amounts of stock and make consistent quantities of dust. We recommend using a vacuum to keep the work area safe.

D l L S Rotation Code
31.7 38.1 87 12.7 DROITE Profil C CMT85670211
31.7 38.1 87 12 DROITE Profil C CMT95670211

Professional finger joint router bits

Professional finger joint router bitsProfessional finger joint router bits
(CMT8-900.606)

Use these bits to make incredibly strong side-to-size or end-to-end joints in multiple wood kinds or composites. The tightness of the accurately cut joint and the maximum glue surface create a joint that is actually stronger than the wood itself. The bit features two flute design, carbide teeth and six removable cutters. Use them in combination to mill joints from 12,7mm (1/2") to 36mm (1-3/8").

T1 D H L S Rotation Code
12.7-36 47.6 5.5 97 12 DROITE CMT90060611
12.7-36 47.6 5.5 97 12.7 DROITE CMT80060611

(PB013-03)

D H B Number of teeth Code
140 12-30 50 2+2 ELPB013005

Adaptors

Adaptors
(CMT304)

For use on the following machines :
Balestrini, Bilek.

TECHNICAL FEATURES :
- High precision and total reliability.
- Perfectly centred.
- Defect-free rotation.
- Super-strength steel.
- Precision relief on all surfaces.
- Quick drill change.
- Adaptable to many different spindle nose designs.

B D S Rotation Code
8 16 M8/20° 48' DROITE CMT30408001
10 19.5 M8/20° 48' DROITE CMT30400001
8 16 M8/20° 48' GAUCHE CMT30408002
10 19.5 M8/20° 48' GAUCHE CMT30400002

Sabre saw blade JS1125VF

Sabre saw blade JS1125VF
(JS1125VF)

For cutting medium-thick to thick sheet metal from 2mm to 10mm (5/64" - 3/8") in thickness, thin to thick-walled pipe and profiles with less than 175mm (7") in thickness. Ideal for demolition work on metal. Effortless fine cut.

L l H K TS Packaging Code
225 205 19 1.25 1.8-2.6 5 CMTJS1125VF-5

Case : Premier, Essentiel, Multiprofile case N°3

Case : Premier, Essentiel, Multiprofile case N°3
(ZAK-COFFRET-1)

Multiprofile case N°3
This case is designed to make kitchen and cupboard doors by profiles and counter profiles, with long pegged tenons and cathedral arch. To make indoor doors and perform various woodworking assemblies.

d Code
30 PREMIER case:
210310: Cutter head D.90 ht50 Al30 Moulding
FRAI0257: Grooving cutter outside 120x5/10xal30 Z4+4HM
105335: Grooving cutter outside dia. 150 ht20/40 al30 z4+2x2
531003: Set of 2 CTX finger joint 4x3 pitch of 4
531021: Set 2 CTX congés ¼ and ½ circle of 12mm
531872: Set of 2 CTX crown profile and counter profile
701304: Ball bearing guide outside Ø55 al 100
MORT6G: Slot cutter HSS D.6 left
MORT8G: Slot cutter HSS D.8 left
MORT10G: Slot cutter HSS D.10 left
LC2508001 Carbide circular blade: D.250x2.2/3.2xal30 Z80
ZAK000130
30 Essentiel case
105335: CUTTER OUTSIDE DIA 150 HT 20/40 AL 30 Z4 + V2X2
FRAI0257: ADJUSTABLE GROOVING CUTTER 120 X 5/10 X AL 30 x HM 4 +4
PO50203: SET OF PROFILE KNIVES HT 50 MM PROFILE 203 - SAW TOOTH TONGUE AND GROOVE –
PO50220: SET OF PROFILE KNIVES HT 50 MM PROFILE 220
PO50100: DOUBLE CUTTER HEAD CENTRE DISTANCE DIAMETER 100 MM X 50 X 30 mm Z=2+2 V=1+1
ZAK000170
  ZAK000170M
30 Multiprofile case N°3
2 MULTIZAK discs: 213215
1 set of profile knives 22 bot.: 561222
1 set of profile knives 22 top: 561722
1 set of grooving knives of 5: 561001
1 set of tenoning knives of 18: 561918
1 set of panel raiser knives: 561530
1 TAO cutter head: 210311
1 set of ¼ circle knives: 531020
1 set of finger joint knives of 4: 531003
1 contouring ball bearing guide: 701305
1 panel raiser ball bearing guide: 701355
1 shaft end sleeve: 702302
1 set of thin spacers: 703300
ZAK350310
50 Multiprofile case N°3
2 MULTIZAK discs: 215217
1 set of profile knives 22 bot.: 561222
1 set of profile knives 22 top: 561722
1 set of grooving knives of 5: 561001
1 set of tenoning knives of 18: 561918
1 set of panel raiser knives: 561530
1 TAO cutter head: 210511
1 set of ¼ circle knives: 531020
1 set of finger joint knives of 4: 531003
1 contouring ball bearing guide: 701505
1 panel raiser ball bearing guide: 701565
1 shaft end sleeve: 702502
1 set of thin spacers: 703500
ZAK350510

Arbors for slot cutters 823

Arbors for slot cutters 823Arbors for slot cutters 823
(CMT8-924-3)

S Rotation Code
8 DROITE With bearing CMT92408210
8 DROITE Without bearing CMT92408200
12.7 DROITE With bearing CMT82412200
12.7 DROITE Without bearing CMT82412210

Solid surface wavy joint router bits

Solid surface wavy joint router bitsSolid surface wavy joint router bits
(CMT8-981.531)

These bits are ideal for making strong joints on any solid surface, thanks to a wider area for glue.

Ideal for use with all composite materials :
Wilsonart®, Gibraltar®, Corian®, Surell®, Fountainhead®, Avonite®, Formica®, Etc.

D l R L S Rotation Code
15.87 51.5 4.36 89 12 DROITE CMT98153111
15.87 51.5 4.36 89 12.7 DROITE CMT88153111

Adjustable grooving cutter heads

Adjustable grooving cutter heads
(FRAI006)

For making grooves.

Ø H d Z t Code
180 4/8 50 2(2+2) 35 FRAI0568
180 5/10 50 2(2+2) 35 FRAI0648
180 8/16 50 2(2+2) 35 FRAI0512

(PG040-02)

D H Al Z Code
165 50 50 2 ELPG040030
165 80 50 2 ELPG040095

Slot and mortise boring bits

Slot and mortise boring bits
(CMT166-167)

Used for drilling and cutting mortise slots in solid wood, wood composites, plastic and laminated materials.

TECHNICAL DETAILS :
- Super strength steel.
- 2 HW precision ground cutting edges (Z2).
- 2 negatively ground spurs (V2).

d D l L S Rotation Code
11 19 62 155 M12x1 DROITE CMT16619011
11 22 62 155 M12x1 DROITE CMT16622011
12 19 62 155 M12x1 DROITE CMT16719011
12 24 62 155 M12x1 DROITE CMT16724011

2-piece entry door router bit sets

2-piece entry door router bit sets2-piece entry door router bit sets2-piece entry door router bit sets
(CMT8-955.806)

These bits allow you to create tongue-and-groove joints and produce entry and passage doors with minimal effort. The bit on the left, when used in pair with the bit 800.628.11, is great for producing long and beefy tenons, whereas the other tool makes the decorating profile.

D l S Rotation Code
44.5-48 35-44.5 12 DROITE CMT95580611
44.5-48 35-44.5 12.7 DROITE CMT85580611