Flexible templates for routing
Flexible templates for curved and arched routing
The CMT flexible template is easy to screw on any kind of wooden panels, MDF or chipboard for creating forms, arcs and curved elements easily and rapidly. In order to fix your template you can use countersunk screws, which are widely available on the market. The CMT template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
TECHNICAL FEATURES :
- Special plastic without any plasticizer.
- Made in Germany.
- Lasts more than 10 years.
|18x18||1000||A) Flexible template for curved and arched routing||CMTTMP-1000|
|12x12||1200||B) Flexible template for curved and arched routing||CMTTMP-1200|
|18x18||2000||C) Flexible template for curved and arched routing||CMTTMP-2000|
12 corner radius router template set
Our useful 3-piece corner radius template set includes 8mm (5/16") thick acrylic templates that will allow you to make 12 different radii (3 per template) by using a flush trim or a pattern bit (sold separately). Included with the templates you will also find 4 alignment pins and 4 wood screws. Use the pins to align the template onto your workpiece, then use the four wood screws provided to secure it. Remove the alignment pins and use the bit to cut the corner of your workpiece to the same radius as the template.
Set contains :
12 Different rays (3 templates)
4 Alignment pins
4 Wood screw
Possible Achievable :
|For routing radii from 3mm (1/8") to 25mm (1")||CMTTMP-R12|