Discover our entire catalogue.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
Containing 6 of CMT's most frequently used 12,7mm (1/2") shank router bits, this compact Italian hardwood case is beautiful and convenient for your woodworking needs. All the bits contained feature the finest steel and carbide, plus CMT's baked-on orange PTFE non-stick coating.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
This CMT three-piece router bit set simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furniture tenons. The included tenon cutter produces a beefy 27mm (1-1/16") long tenon. Coupled with the cope cutter, you can produce long and strong tenons with minimum setup. As an extra bonus the tenon cutter can be used for furniture making requiring any tenon from 4,7mm (3/16") to 16mm (5/8") thick.

These bits allow you to create tongue-and-groove joints and produce entry and passage doors with minimal effort. The bit on the left, when used in pair with the bit 800.628.11, is great for producing long and beefy tenons, whereas the other tool makes the decorating profile.

This router bit is ideal for making long and beefy tenons for your doors. Adjust the board thickness by simply adding or removing the spacers between the upper and the lower cutter.
Safety precautions : maximum speed 12,000 RPM.

If you've struggled cutting fitting tenons, here's the perfect solution for you. CMT's tenon cutting router bit will produce perfectly fitting tenons in every board you cut, even if the boards vary slightly in thickness. Simply set the distance between the cutters using the included spacers, and you can easily cut tenons from 4,76mm (3/16") to 9,5mm (3/8") thick, up to 27mm (1-1/16") long. This simple-to-use router bit takes the mystery out of achieving the excellent tenon-to-mortise fit required for high quality joinery.
Safety precautions : maximum speed 12,000 RPM.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
These CMT's sets aren't only a random selection of odds and ends packaged in a nice elegant box, but they are also professional kits for drawer and door makers. 3 sets to choose from, 5 different bits to suit your needs: a raised panel bit, rail and stile bits, a glue joint and a drawer lock bit. Please refer to the illustrations below for complete profile options.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
These CMT's sets aren't only a random selection of odds and ends packaged in a nice elegant box, but they are also professional kits for drawer and door makers. 3 sets to choose from, 5 different bits to suit your needs: a raised panel bit, rail and stile bits, a glue joint and a drawer lock bit. Please refer to the illustrations below for complete profile options.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
These CMT's sets aren't only a random selection of odds and ends packaged in a nice elegant box, but they are also professional kits for drawer and door makers. 3 sets to choose from, 5 different bits to suit your needs: a raised panel bit, rail and stile bits, a glue joint and a drawer lock bit. Please refer to the illustrations below for complete profile options.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
Open new doors with CMT! Our 3 piece kitchen sets include a couple of rail and style bits and a raised panel bit. Choose among 4 possible profiles to make panel doors easy and economical. Each bit is made from bar stock steel and the highest quality tungsten carbide, along with the trademark orange non-stick PTFE coating. Also, they all come with their protective hardwood case: a very nice object to keep your bits safe, organized and within hand's reach.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
CMT's junior raised panel sets add intricate detail on a whole new scale! You will make frame and panel details as small as 70mm (1-3/4") square in material as thin as 11mm (7/16"). Delicate panel doors are only the beginning – use these bits with templates to add interesting arches to your work. The sets include a choice of a cove or an ogee raised panel bit and an ogee rail & stile pair. Packaged in beautiful hardwood cases.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
CMT's junior raised panel sets add intricate detail on a whole new scale! You will make frame and panel details as small as 70mm (1-3/4") square in material as thin as 11mm (7/16"). Delicate panel doors are only the beginning – use these bits with templates to add interesting arches to your work. The sets include a choice of a cove or an ogee raised panel bit and an ogee rail & stile pair. Packaged in beautiful hardwood cases.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
Available with raised panel bits in two different profiles, these sets feature six router bits for making arched raised panel doors and professional drawer fronts. These sets include:
- Ogee rail & stile bits : these two perfectly matched tools will eliminate the frustration of setting up reversible cutters. The stile bits also feature shear angles for neater cuts.
- Raised panel bit with backcutter : this 88,9mm (3-1/2") diametre bit features a backcutter for milling both the front and the back on the panel in a single cut. We recommend using a 31,7mm (1-1/4") diametre bearing to work safely in two shallow passes.
- Super-duty flush trim bit: this 19mm (3/4") diametre bit gives you a superior cut with minimal chipping, even on end grain.
- Ogee door edge bit : a subtle cove followed by a subtle roundover adds an elegant touch to your door edge.
- Drawer front bit : this bit makes a mini-raised panel cut on the outside edges of your drawer fronts.

BOX IS PROTECTED BY US PATENT NO. 7,703,605 AND BY OTHER FOREIGN PATENTS.
These 3 piece sets will produce beautiful raised panel doors with a classic, diminutive bevelled profile. Designed for use in fine furniture making, these sets include two matched cope and stick bits for producing frames from 15,87mm (5/8") to 19mm (3/4") thick. The stick bit shapes a decorative 4,76mm (3/16") thumbnail moulding along the edge of the frame. The panel bit is designed for 12,7mm (1/2") think material. All bits are equipped with guide bearings for shaping curved work such as the small arched panel doors seen on secretaries and corner cabinetry. These sets also produce panels for small chests, lids for small boxes, or drawer fronts. Instructions included.

These new bit sets are excellent for producing adjustable tongue and groove joints with a bevel, in order to eliminate the panel rattle that may come up with the production of standards cabinets. Cut precise grooves into your plywood veneered panels and make perfect rattle-free fits. To be used on table-mounted routers. Avoid using these bits in hand-held power tools.

- Adjustable at 0.050mm (0.002") increments.
- For groove width from 5mm (13/64") to 13,5mm (17/32").
- Cut stock thickness from 12,7mm (1/2") to 31,7mm (1-1/4").
- Features micrograin carbide for longer life.

Ideal for fast plunge cuts and other grooving applications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood.

CMT is proud to offer you these new sets of high quality solid tungsten carbide upcut and downcut spiral bits in the most popular diametres. The new formulated super micrograin composition guarantees extremely sharp long-lasting cutting edges, whereas the spiral layout allows for a more efficient chip ejection. In addition these bits stay cooler during work and are suitable for CMT's new precision machines. Recommended for use on soft and hardwood, plywood, laminates, MDF and plastic materials. To be used on handheld routers and CNC machines.

Create slots, grooves and rabbets easily with these CMT slot cutters sets. Ideal for biscuit joints and milling perfect tongue-and-groove joints, these sets include 4 bearings allowing different cutting depths: 7,95mm (5/16"), 9,55mm (3/8"), 12,7mm (1/2") and 14,3mm (9/16"). Please refer to the drawings for some application examples and the correct cutter combinations.
Safety tips : never use these slot cutters set without shims between the cutters. The distance between the cutters can vary from 1mm (3/64") to 1,7mm (1/16"). A shim must also be positioned between the ball bearings and the cutters.

Our beautiful sets are the perfect companion for the professional craftsman. We offer three 5 piece sets with a selection of straight bits and the most popular profile router bits. These tools feature Fatigue Proof® steel, micrograin carbide and orange PTFE non-stick coating. Safely stored in a solid plastic box to fit in your display cabinet.

Our beautiful sets are the perfect companion for the professional craftsman. We offer three 5 piece sets with a selection of straight bits and the most popular profile router bits. These tools feature Fatigue Proof® steel, micrograin carbide and orange PTFE non-stick coating. Safely stored in a solid plastic box to fit in your display cabinet.

Beautiful panel doors can be ruined by a poorly-aligned panel. Next time, slip panalign strips into the rails to keep panels perfectly centred while allowing for expansion. Unlike carpet foam, which eventually loses elasticity and ceases to work, the rubber in panalign strips is specially designed to spring back indefinitely. The rectangular shape makes the strips easy to handle. Typical doors require 4 to 8 strips each.