Wood professionals

Discover our entire catalogue.

Straight and spiral bits

Straight router bits, short series

Straight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short seriesStraight router bits, short series
(CMT7-8-911)

If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products.

Made of special Fatigue Proof® steel and micrograin carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue. Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.

D l L S Rotation Code
2 4 45 6 DROITE CMT71102011
3 8 45 6 DROITE CMT71103011
4 10 45 6 DROITE CMT71104011
5 12 50 6 DROITE CMT71105011
6 16 50 6 DROITE CMT71106011
7 18 49 6 DROITE CMT71107011
8 20 50 6 DROITE CMT71108011
9 20 48 6 DROITE CMT71109011
10 20 48 6 DROITE CMT71110011
11 20 48 6 DROITE CMT71111011
12 20 50 6 DROITE CMT71112011
13 20 57 6 DROITE CMT71113011
14 20 50 6 DROITE CMT71114011
15 20 57.2 6 DROITE CMT71115011
16 20 57.2 6 DROITE CMT71116011
17 20 50 6 DROITE CMT71117011
18 20 50 6 DROITE CMT71118011
19 20 57.2 6 DROITE CMT71119011
20 20 50 6 DROITE CMT71120011
22 20 57.2 6 DROITE CMT71122011
24 20 50 6 DROITE CMT71124011
25 20 50 6 DROITE CMT71125011
2 4 45 6.35 DROITE CMT81102011
3 8 45 6.35 DROITE CMT81103011
3.2 9.5 45 6.35 DROITE CMT81103211
4 10 45 6.35 DROITE CMT81104011
4.75 12.7 50.8 6.35 DROITE CMT81104711
5 12 50 6.35 DROITE CMT81105011
6 16 50 6.35 DROITE CMT81106011
6.35 19 50.8 6.35 DROITE CMT81106411
6.35 19 57.2 6.35 DROITE CMT81106511
7 18 49 6.35 DROITE CMT81107011
8 20 50 6.35 DROITE CMT81108011
8 25.4 70 6.35 DROITE CMT81108111
9.5 19 50.8 6.35 DROITE CMT81109511
9.5 25.4 63.5 6.35 DROITE CMT81109611
10 20 48 6.35 DROITE CMT81110011
12 20 50 6.35 DROITE CMT81112011
12.3 25.4 57.2 6.35 DROITE CMT81112311
12.7 19 57.2 6.35 DROITE CMT81112711
14 20 50 6.35 DROITE CMT81114011
14.2 14.2 57.2 6.35 DROITE CMT81114211
15 20 57.2 6.35 DROITE CMT81115011
15.8 19 66.7 6.35 DROITE CMT81115811
16 20 57.2 6.35 DROITE CMT81116011
18 20 50 6.35 DROITE CMT81118011
18.2 25.4 57.2 6.35 DROITE CMT81118211
19 20 57.2 6.35 DROITE CMT81119111
20 20 50 6.35 DROITE CMT81120011
22 20 57.2 6.35 DROITE CMT81122011
25.4 19 50.8 6.35 DROITE CMT81125411
3 8 50 8 DROITE CMT91103011
4 10 50 8 DROITE CMT91104011
5 12 50 8 DROITE CMT91105011
6 16 50 8 DROITE CMT91106011
7 18 49 8 DROITE CMT91107011
7.6 20 50 8 DROITE CMT91107611
8 20 50 8 DROITE CMT91108011
9 20 48 8 DROITE CMT91109011
10 20 48 8 DROITE CMT91110011
11 20 48 8 DROITE CMT91111011
12 20 50 8 DROITE CMT91112011
13 20 57 8 DROITE CMT91113011
14 20 50 8 DROITE CMT91114011
15 20 57.2 8 DROITE CMT91115011
16 20 57.2 8 DROITE CMT91116011
18 20 50 8 DROITE CMT91118011
19 20 57.2 8 DROITE CMT91119011
20 20 50 8 DROITE CMT91120011
22 20 57.2 8 DROITE CMT91122011
24 20 50 8 DROITE CMT91124011
25 20 50 8 DROITE CMT91125011
3 8 58.3 12 DROITE CMT91153011
4 10 58.3 12 DROITE CMT91154011
5 12 58.3 12 DROITE CMT91155011
6 19 63.5 12 DROITE CMT91156011
7 18 63.5 12 DROITE CMT91157011
12 25.4 63.5 12 DROITE CMT91162011
6.35 19 63.5 12.7 DROITE CMT81156411
6 19 63.5 12.7 DROITE CMT81156011
8 25.4 70 12.7 DROITE CMT81158111
9.5 25.4 66.7 12.7 DROITE CMT81159511
10 25.4 63.5 12.7 DROITE CMT81160011
12 25.4 63.5 12.7 DROITE CMT81162011
12.3 25.4 63.5 12.7 DROITE CMT81162311
12.7 25.4 66.7 12.7 DROITE CMT81162711
12.7 31.7 82.5 12.7 DROITE CMT81162811
15.8 25.4 63.5 12.7 DROITE CMT81166011
16 25.4 63.5 12.7 DROITE CMT81166111
18.2 25.4 63.5 12.7 DROITE CMT81168211
19 25.4 63.5 12.7 DROITE CMT81169011
19.85 25.4 59 12.7 DROITE CMT81170011
25.4 31.7 76.2 12.7 DROITE CMT81175411
28.5 31.7 76.2 12.7 DROITE CMT81178511

Related products

Straight router bits, long series

Straight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long seriesStraight router bits, long series
(CMT7-8-912)

If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece, then you definitely must include CMT straight bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products. Made of special Fatigue Proof® steel and micrograin carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue. Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.
Safety precautions: never use damaged or worn bits. Always work at the proper feed rate without forcing the bit. Pay particular attention when making the initial cut with a small diameter bit. For best results when working with small diameter bits, make the cut in more than one pass.

D l L S Rotation Code
3 11 60 6 DROITE   CMT71203011
4 12 60 6 DROITE   CMT71204011
5 18 60 6 DROITE   CMT71205011
6 25.4 60 6 DROITE   CMT71206011
8 31.7 60 6 DROITE   CMT71208011
10 31.7 60 6 DROITE   CMT71210011
12 31.7 60 6 DROITE   CMT71212011
14 31.7 60 6 DROITE   CMT71214011
15 31.7 66 6 DROITE   CMT71215011
16 31.7 70 6 DROITE   CMT71216011
3.2 12.7 50.8 6.35 DROITE   CMT81203211
6 25.4 60 6.35 DROITE   CMT81206011
6.35 25.4 60 6.35 DROITE   CMT81206411
8 31.7 60 6.35 DROITE   CMT81208011
9.5 31.7 63.5 6.35 DROITE   CMT81209511
10 31.7 60 6.35 DROITE   CMT81210011
12 31.7 60 6.35 DROITE   CMT81212011
12.7 31.7 70 6.35 DROITE   CMT81212711
14 31.7 60 6.35 DROITE   CMT81214011
15 31.7 66 6.35 DROITE   CMT81215011
15.8 31.7 70 6.35 DROITE   CMT81215811
16 31.7 66 6.35 DROITE   CMT81216011
6 25.4 60 8 DROITE   CMT91206011
8 31.7 60 8 DROITE   CMT91208011
10 31.7 60 8 DROITE   CMT91210011
12 31.7 60 8 DROITE   CMT91212011
12.7 31.7 70 8 DROITE   CMT91212711
14 31.7 60 8 DROITE   CMT91214011
15 31.7 66 8 DROITE   CMT91215011
16 31.7 66 8 DROITE   CMT91216011
8 31.7 75 12 DROITE   CMT91258011
9 31.7 75 12 DROITE   CMT91259011
10 31.7 74 12 DROITE   CMT91260011
12 38.1 95 12 DROITE   CMT91262111
12 50.8 108 12 DROITE   CMT91262211
12 70 110 12 DROITE   CMT91262311
14 31.7 70 12 DROITE   CMT91264011
15 31.7 70 12 DROITE   CMT91265011
16 31.7 70 12 DROITE   CMT91266011
18 38.1 80 12 DROITE   CMT91268111
19 38.1 82.5 12 DROITE   CMT91269011
19 50.8 92 12 DROITE   CMT91269111
20 38.1 80 12 DROITE   CMT91270111
22 38.1 80 12 DROITE   CMT91272111
9.5 31.7 73 12.7 DROITE   CMT81259511
10 31.7 70 12.7 DROITE   CMT81260011
11.1 31.7 82.5 12.7 DROITE   CMT81261111
12 31.7 70 12.7 DROITE   CMT81262011
12 38.1 95 12.7 DROITE   CMT81262111
12.7 38.1 95 12.7 DROITE   CMT81262711
12.7 50.8 108 12.7 DROITE   CMT81262811
12.7 63.5 111 12.7 DROITE   CMT81262911
16 31.7 70 12.7 DROITE   CMT81266011
19 38.1 82.5 12.7 DROITE   CMT81269011
19 50.8 92 12.7 DROITE   CMT81269111
6.35 25.4 60 12.7 DROITE 10 Pc. Masterpack CMT81206411-X10
12.7 50.8 108 12.7 DROITE 10 Pc. Masterpack CMT81262811-X10

Related products

Solid carbide router cutters

Solid carbide router cutters
(CMT174-01)

Used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL DETAILS :
- Premium quality HWM.
- 2 radial relief cutting edges (Z2).
- 1 plunging tip (Z1).

D l L S Rotation Code
3 10 55 8 DROITE CMT17403011
4 10 55 8 DROITE CMT17404011
5 12 55 8 DROITE CMT17405011
6 14 55 8 DROITE CMT17406011
7 20 55 8 DROITE CMT17407011

Router cutters

Router cutters
(CMT174-02)

Used for drilling, grooving or jointing on solid wood and wood composites. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL DETAILS :
- Premium quality HW.
- 2 radial relief cutting edges (Z2).
- 1 plunging tip (Z1).

D l L S Rotation Code
8 20 55 8 DROITE CMT17408011
8 30 70 8 DROITE CMT17408111
8 40 90 8 DROITE CMT17408211
9 20 55 8 DROITE CMT17409011
10 20 60 8 DROITE CMT17410011
10 30 70 8 DROITE CMT17410211
10 40 90 8 DROITE CMT17410111
11 20 60 8 DROITE CMT17411011
12 20 60 8 DROITE CMT17412011
12 30 70 8 DROITE CMT17412211
12 40 90 8 DROITE CMT17412111
13 20 60 8 DROITE CMT17413011
14 20 60 8 DROITE CMT17414011
14 30 70 8 DROITE CMT17414211
14 40 90 8 DROITE CMT17414111
15 20 60 8 DROITE CMT17415011
16 20 70 8 DROITE CMT17416011
16 30 70 8 DROITE CMT17416211
16 40 90 8 DROITE CMT17416111
18 20 70 8 DROITE CMT17418011
18 30 70 8 DROITE CMT17418111
18 40 80 8 DROITE CMT17418211
19 20 70 8 DROITE CMT17419011
20 20 70 8 DROITE CMT17420011
20 30 70 8 DROITE CMT17420111
20 40 90 8 DROITE CMT17420211
22 20 70 8 DROITE CMT17422011
22 30 70 8 DROITE CMT17422111
22 40 90 8 DROITE CMT17422211
24 20 70 8 DROITE CMT17424011
24 30 70 8 DROITE CMT17424111
24 40 90 8 DROITE CMT17424211
25 20 70 8 DROITE CMT17425011
26 20 70 8 DROITE CMT17426011
26 30 70 8 DROITE CMT17426111
28 20 70 8 DROITE CMT17428011
28 30 70 8 DROITE CMT17428111
29 20 70 8 DROITE CMT17429011
30 20 70 8 DROITE CMT17430011

Router cutters

Router cutters
(CMT177-01)

Used for grooving, jointing and general routing operation on solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers.

TECHNICAL FEATURES :
- Super strength steel.
- 2 precision ground HW cutting edges (Z2).
- 1 HW plunge centre tip (Z1).

D l L S Rotation Code
10 35 90 12 DROITE CMT17710011
12 35 90 12 DROITE CMT17712011
12 50 100 12 DROITE CMT17712111
14 35 90 12 DROITE CMT17714011
16 35 90 12 DROITE CMT17716011
16 60 110 12 DROITE CMT17716111
18 35 90 12 DROITE CMT17718011
18 60 110 12 DROITE CMT17718111
20 35 90 12 DROITE CMT17720011
22 35 90 12 DROITE CMT17722011
24 35 90 12 DROITE CMT17724011
25 35 90 12 DROITE CMT17725011
26 35 90 12 DROITE CMT17726011
28 35 90 12 DROITE CMT17728011
30 35 90 12 DROITE CMT17730011
35 35 90 12 DROITE CMT17735011

Solid carbide upcut spiral bits for aluminum and PVC

Solid carbide upcut spiral bits for aluminum and PVC
(CMT186)

Used for ripping, template routing and panel sizing on plastic materials and aluminum at high feed speed.
Can be used on machining centers, point to point machines, CNC routers and hand held routers equipped with chucks or adaptors.

TECHNICAL DETAILS :

- Premium quality HWM
- 2 spiral cutting edges [Z2]
- Extra-fine finish
- Upward chip ejection

D l L S Rotation Code
4 10 60 6 DROITE CMT18664011
5 12 60 6 DROITE CMT18665011
6 15 60 6 DROITE CMT18606011
8 20 60 8 DROITE CMT18608011
10 22 72 10 DROITE CMT18610011
12 25 83 12 DROITE CMT18612011
14 25 82 14 DROITE CMT18614011
16 25 82 16 DROITE CMT18616011

Straight cutters with threaded shank

Straight cutters with threaded shank
(CMT173-182)

TECHNICAL FEATURES :
- Super strength steel.
- 2 HW alternating precision ground cutting edges (Z2+1).

D l L S Rotation Code
6 14 50 M10 DROITE CMT17306011
8 20 52 M10 DROITE CMT17308011
8 35 67 M10 DROITE CMT18208011
10 22 52 M10 DROITE CMT17310011
10 35 67 M10 DROITE CMT18210011
12 22 52 M10 DROITE CMT17312011
12 35 67 M10 DROITE CMT18212011
14 25 52 M10 DROITE CMT17314011
14 35 67 M10 DROITE CMT18214011
15 25 52 M10 DROITE CMT17315011
16 25 52 M10 DROITE CMT17316011
16 45 77 M10 DROITE CMT18216011
18 25 52 M10 DROITE CMT17318011
18 45 77 M10 DROITE CMT18218011
20 25 52 M10 DROITE CMT17320011
20 45 77 M10 DROITE CMT18220011
22 25 52 M10 DROITE CMT17322011
25 25 52 M10 DROITE CMT17325011
30 25 52 M10 DROITE CMT17330011

Straight cutters with threaded shank

Straight cutters with threaded shank
(CMT170-171-180-181)

TECHNICAL FEATURES:
- Super strength steel.
- 2 HW alternating precision ground cutting edges (Z2+1).

Ideal for cutting openings for electrical boxes and similar operations in solid wood, wood composites, plastics and laminates. Can be used on machining centres, CNC routers and hand-held routers equipped with chucks or adaptors.

D l L S Rotation Code
6 18 80 M12x1 DROITE CMT17006011
8 23 60 M12x1 DROITE CMT17008011
8 35 67 M12x1 DROITE CMT17108011
10 23 60 M12x1 DROITE CMT17010011
10 35 67 M12x1 DROITE CMT17110011
11 23 60 M12x1 DROITE CMT17011011
12 23 60 M12x1 DROITE CMT17012011
12 35 67 M12x1 DROITE CMT17112011
12 45 77 M12x1 DROITE CMT18012011
14 23 60 M12x1 DROITE CMT17014011
14 35 67 M12x1 DROITE CMT17114011
15 25 60 M12x1 DROITE CMT17015011
16 25 60 M12x1 DROITE CMT17016011
16 35 67 M12x1 DROITE CMT17116011
16 45 77 M12x1 DROITE CMT18016011
16 60 92 M12x1 DROTIE CMT18116011
18 25 60 M12x1 DROITE CMT17018011
18 35 67 M12x1 DROITE CMT17118011
18 45 77 M12x1 DROITE CMT18018011
20 25 60 M12x1 DROITE CMT17020011
20 35 67 M12x1 DROITE CMT17120011
20 45 77 M12x1 DROITE CMT18020011
20 60 92 M12x1 DROITE CMT18120011
22 25 60 M12x1 DROITE CMT17022011
22 35 67 M12x1 DROITE CMT17122011
24 25 60 M12x1 DROITE CMT17024011
25 25 60 M12x1 DROITE CMT17025011
26 25 60 M12x1 DROITE CMT17026011
28 25 60 M12x1 DROITE CMT17028011
30 25 60 M12x1 DROITE CMT17030011
35 25 60 M12x1 DROITE CMT17035011

Straight router bits with insert knives

Straight router bits with insert knivesStraight router bits with insert knives
(CMT651-652)

Ideal for fast plunge cuts and other grooving applications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood.

D l L S Rotation Code
8 20 60 6.35 DROITE CMT65107911
9.5 30 70 6.35 DROITE CMT65109511
12.7 30 70 6.35 DROITE CMT65112711
8 20 60 8 DROITE CMT65108011
10 30 70 8 DROITE CMT65110011
12 30 70 8 DROITE CMT65112011
14 30 73 8 DROITE CMT65114011
8 20 67 12 DROITE CMT65108111
10 30 80 12 DROITE CMT65110111
12 30 80 12 DROITE CMT65112111
12 50 103 12 DROITE CMT65212111
8 20 67 12.7 DROITE CMT65168111
9.5 30 80 12.7 DROITE CMT65169511
10 30 80 12.7 DROITE CMT65170111
12 30 80 12.7 DROITE CMT65172111
12 50 103 12.7 DROITE CMT65262111
12.7 30 80 12.7 DROITE CMT65172711
12.7 50 103 12.7 DROITE CMT65262811

Straight router bits with insert knives for laminates

Straight router bits with insert knives for laminatesStraight router bits with insert knives for laminates
(CMT652)

Straight trimmer bits with one replaceable knife fixed by Torx screw. For economical specialist application requiring low down-time. The 29,5x9x1,5mm knife provide a 40mm (1-37/64") cutting length when operating in multiple passes. For routing, trimming and grooving on board materials (laminated chipboards, worktop panels and MDF). For use on portable routers.

D l L S Rotation Code
12 29.5 79 8 DROITE CMT65212011
12 39.5 90 8 DROITE CMT65212211
14 50 96 12 DROITE CMT65214111
16 50 96 12 DROITE CMT65216111
12.7 29.5 89 12.7 DROITE CMT65262711

Related products

Straight router bits with insert knives

Straight router bits with insert knives
(CMT653-01)

Straight router bits with on replaceable plunging knife and side knife fixed by a special Torx screw. The tool bodies are precisely balanced. For finishing, routing, plunging and grooving on board materials (laminated chipboards and MDF) and hardwood. For use on portable routers.

D l L S Rotation Code
16 28.3 82 8 DROITE CMT65316011
16 28.3 92 12 DROITE CMT65316111
16 48.3 111.5 12 DROITE CMT65316211
15.8 28.3 91 12.7 DROITE CMT65315811
15.8 48.3 112 12.7 DROITE CMT65315911

Straight router bits with insert knives

Straight router bits with insert knives
(CMT653-02)

Straight router bits with on replaceable plunging knife and side knife fixed by a special Torx screw. The tool bodies are precisely balanced. For finishing, routing, plunging and grooving on board materials (laminated chipboards and MDF) and hardwood. For use on CNC machining centres.

D l L S Rotation Code
16 28.3 92 20 DROITE Spare knives
Side : 790.283.12 Top : 790.075.00
CMT65366111
16 48.3 111.5 20 DROITE Spare knives
Side : 790.483.12 Top : 790.075.00
CMT65366211
18 48.3 111.5 20 DROITE Spare knives
Side : 790.483.12 Top : 790.075.00
CMT65368111
20 48.3 111.5 20 DROITE Spare knives
Side : 790.483.12 Top : 790.096.00
CMT65370111

3 Piece plywood groove bit sets

3 Piece plywood groove bit sets
(CMT811)

Our plywood groove bits are designed specifically for routing grooves and dadoes for joints in plywood. That means they match the true thickness of plywood, producing tight, accurate joints. Use our 18,2mm (23/32") bit for 19mm plywood, 12,3mm (31/64") bit for 12,7mm (1/2") plywood and our 6mm for 6,35mm (1/4") ply. No gaps or sloppy joints, guaranteed. These money-saving 3-bit sets are available with 12,7mm (1/2") or 6,35 (1/4") shanks.

S Rotation Code
6.35 DROITE CMT81100111
12.7 DROITE CMT81150111

Straight router bits with insert knives

Straight router bits with insert knivesStraight router bits with insert knives
(CMT654)

Straight router bit with two replaceable knives fixed by special Torx screws. Their blades are sharpened on the top with 3° angle for better plunging operations.

D l L S Rotation Code
16 28.3 76 8 DROITE CMT65416011
16 28.3 87 12 DROITE CMT65416111
16 48.3 105 12 DROITE CMT65416211
16 28.3 87 12.7 DROITE CMT65466111
16 48.3 105 20 DROITE CMT65466211

Straight router bit with insert knives

Straight router bit with insert knivesStraight router bit with insert knives
(CMT655)

Straight router bit with two replaceable knives fixed by special Torx screws. Their blades are sharpened on the top with 3° angle for better plunging operations.

D l L S Rotation Code
19 12 45 8 DROITE CMT65519011