Wood professionals

Discover our entire catalogue.

Solid carbide spiral bits

Solid carbide upcut spiral bits with chipbreaker

Solid carbide upcut spiral bits with chipbreakerSolid carbide upcut spiral bits with chipbreaker
(CMT197)

A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer.
Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES:
- Premium quality HWM.
- 4 spiral cutting edges (2 with chip-breaker) (Z2+2R).
- Max tooth depth: 0.1mm.
- Provide excellent finish on the lower side of the workpiece.
- Upward chip ejection.

D l L S Rotation Code
12 42 90 12 DROITE CMT19712111
14 50 110 14 DROITE CMT19714011
16 55 110 16 DROITE CMT19716011
16 35 90 16 DROITE CMT19716111
18 55 110 18 DROITE CMT19718011
20 60 120 20 DROITE CMT19720011
20 70 120 20 DROITE CMT19720111

Solid carbide downcut spiral bits with chipbreaker

Solid carbide downcut spiral bits with chipbreaker
(CMT196)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges (Z3R).
- Max tooth depth: 0.3mm.
- Provide excellent finish on the upper side of the workpiece.
- Downward chip ejection.

D l L S Rotation Code
8 32 80 8 DROITE CMT19608111
10 42 90 10 DROITE CMT19610111
12 35 83 12 DROITE CMT19612011
12 35 80 12 GAUCHE CMT19612012
12 42 90 12 DROITE CMT19612111
12 52 100 12 DROITE CMT19612211
12.7 38.1 88.9 12.7 DROITE CMT19650611
14 50 110 14 DROITE CMT19614011
15.88 54 109.5 15.88 DROITE CMT19650911
16 55 110 16 DROITE CMT19616011
16 55 110 16 GAUCHE CMT19616012
18 55 110 18 DROITE CMT19618011
19.05 54 109.5 19.05 DROITE CMT19651111
20 60 120 20 DROITE CMT19620011
20 60 120 20 GAUCHE CMT19620012
20 72 120 20 DROITE CMT19620111

Solid carbide upcut spiral bits with chipbreaker

Solid carbide upcut spiral bits with chipbreaker
(CMT195-01)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges with chipbreaker (Z3R).
- Maximum tooth depth: 0,3mm.
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.

D l L S Rotation Code
8 32 80 8 DROITE CMT19508111
8 32 80 8 GAUCHE CMT19508112
8 42 90 8 DROITE CMT19508211
10 32 80 10 DROITE CMT19510011
10 32 80 10 GAUCHE CMT19510012
10 42 90 10 DROITE CMT19510111
12 35 83 12 DROITE CMT19512011
12 35 83 12 GAUCHE CMT19512012
12 42 90 12 DROITE CMT19512111
12 52 100 12 DROITE CMT19512211
12.7 38.1 88.9 12.7 DROITE CMT19550611
14 58 110 14 DROITE CMT19514011
16 55 110 16 DROITE CMT19516011
16 55 110 16 GAUCHE CMT19516012
16 35 90 16 DROITE CMT19516111
16 72 120 16 DROITE CMT19516511
18 55 110 18 DROITE CMT19518011
20 60 120 20 DROITE CMT19520011
20 60 120 20 GAUCHE CMT19520012
20 72 120 20 DROITE CMT19520111
20 102 165 20 DROITE CMT19520211

Solid carbide upcut spiral bits

Solid carbide upcut spiral bits
(CMT193)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges (Z3).
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.

D l L S Rotation Code
8 32 80 8 DROITE CMT19308111
8 32 80 8 GAUCHE CMT19308112
10 32 80 10 DROITE CMT19310011
10 32 80 10 GAUCHE CMT19310012
10 42 90 10 DROITE CMT19310111
12 35 83 12 DROITE CMT19312011
12 35 83 12 GAUCHE CMT19312012
12 42 90 12 DROITE CMT19312111
12 52 100 12 DROITE CMT19312211
14 58 110 14 DROITE CMT19314011
16 55 110 16 DROITE CMT19316011
16 55 110 16 GAUCHE CMT19316012
16 35 90 16 DROITE CMT19316111
16 72 120 16 DROITE CMT19316511
18 55 110 18 DROITE CMT19318011
20 60 120 20 DROITE CMT19320011
20 60 120 20 GAUCHE CMT19320012
20 70 120 20 DROITE CMT19320111

Solid carbide spiral bits downcut

Solid carbide spiral bits downcut
(CMT194)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges (Z3).
- Provide an excellent finish on the upper side of the workpiece.
- Downward chip ejection.

D l L S Rotation Code
10 32 80 10 DROITE CMT19410011
10 42 90 10 DROITE CMT19410111
12 35 83 12 DROITE CMT19412011
12 35 83 12 GAUCHE CMT19412012
12 42 90 12 DROITE CMT19412111
14 50 110 14 DROITE CMT19414011
16 55 110 16 DROITE CMT19416011
16 55 110 16 GAUCHE CMT19416012
16 35 90 16 DROITE CMT19416111
18 55 110 18 DROITE CMT19418011
20 60 120 20 DROITE CMT19420011
20 60 120 20 GAUCHE CMT19420012
20 72 120 20 DROITE CMT19420111
20 102 165 20 DROITE CMT19420211

Solid carbide upcut spiral bits for locksets

Solid carbide upcut spiral bits for locksetsSolid carbide upcut spiral bits for locksetsSolid carbide upcut spiral bits for locksets
(CMT195-02)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges (Z3) and chipbreaker (Z3R).
- Max tooth depth: 0.3mm.
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.
- Seat for Seeger ring (not included).

D l l1 L S Rotation Code
14 45 95 150 14 DROITE With chip-breaker CMT19514211
14 45 125 170 14 DROITE With chip-breaker CMT19514411
16 45 95 150 16 DROITE With chip-breaker CMT19516211
16 50 120 170 16 DROITE With chip-breaker CMT19516411
18 45 95 150 18 DROITE With chip-breaker CMT19518211
16 45 95 150 16 DROITE Without chipbreaker CMT19316211

Solid carbide upcut spiral bits chip-breaker for 60° V-point locksets

Solid carbide upcut spiral bits chip-breaker for 60° V-point locksets
(CMT195.143-163)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges with chipbreaker (Z3R).
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.

D l L S Rotation Code
14 58 110 14 DROITE CMT19514311
16 55 110 16 DROITE CMT19516311

Solid carbide upcut with spiral bits chip-breaker for 60° v-point locksets

Solid carbide upcut with spiral bits chip-breaker for 60° v-point locksets
(CMT191.143-163)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.

TECHNICAL FEATURES :
- Premium quality HWM.
- 3 spiral cutting edges with chipbreaker (Z3R).
- Provide an excellent finish on the lower side of the workpiece.
- Upward chip ejection.

D l L S Rotation Code
14 50 110 14 DROITE CMT19114311
16 55 110 16 DROITE CMT19116311

Spiral bit with insert knives and chipbreaker for locksets

Spiral bit with insert knives and chipbreaker for locksetsSpiral bit with insert knives and chipbreaker for locksetsSpiral bit with insert knives and chipbreaker for locksets
(CMT662)

The 95mm length is achieved in 4-5 passes.

TECHNICAL FEATURES :
- Densimet® tungsten heavy metal alloys for low-vibration.
- 2 cutting edges with chipbreaker (Z2R).

D l L S Rotation Code
16 23/95* 150 16 DROITE CMT66216011

Upcut spiral bits with chipbreaker for glue-laminated wooden beams

Upcut spiral bits with chipbreaker for glue-laminated wooden beams
(CMT195-03)

Used for cutting, copying, and routing on glue-laminated wooden beams. To be inserted on Hundegger machines.

TECHNICAL FEATURES :
- High speed cobalt steel.
- 3 upcut spiral cutting edges with chipbreaker (Z3R).
- Upward chip ejection.
- Resharpenable (max. 6000~10000 times).
- Maximum feed speed 2m/minute.

D l L S Rotation Code
30 170 235 30 DROITE CMTY19530051
40 165 235 30 DROITE CMT19540051
50 215 295 30 DROITE CMT19550051

Router cutter with chipbreaker

Router cutter with chipbreaker
(MECH04)

Used for cutting, copying, and routing on glue-laminated wooden beams. To be inserted on Hundegger machines.

D l L S Rotation Code
30 120 195 30 DROITE MECH0038HM
30 120 195 30 DROITE MECH0038
40 160 235 30 DROITE MECH0050
50 215 295 30 DROITE MECH0051

Related products

90° countersink

90° countersink
(MECH05)

Super strength steel. 2 HS cutting edges [Z2+2].

d D L Code
8 20 22 MECH82022
8 25 22 MECH82522
10 20 22 MECH102022
10 25 25 MECH102525
10 30 30 MECH103030
12 25 25 MECH122525
12 30 30 MECH123030
14 40 40 MECH144040

Related products

Diamond router cutters with negative shear angle

Diamond router cutters with negative shear angleDiamond router cutters with negative shear angle
(CMT141.NEG)

TECHNICAL DETAILS :
- Special super-micrograin carbide formulation
- Straight cutting edge.
- DP "H3".
- Resharpenable cutter (max 3 times).
- Feed speed on MDF 3-4 m/min for cutter Ø6 and Ø8mm and 4-5m/minute for Ø10and Ø12mm

D l L S Z Rotation Code
6 10 60 6 1 Neg. DROITE CMT14126061
8 10 65 6 1 Neg. DROITE CMT14128061
10 15 65 10 1 Neg. DROITE CMT14130061
12 20 70 12 1 Neg. DROITE CMT14132061

Adaptable countersinks

Adaptable countersinks
(MECH06)

Cutter adaptable to auger bits

d D L Code
10 50 40 MECH105040
10 60 40 MECH106040
10 65 40 MECH106540
10 75 40 MECH107540

Related products

Solid Carbide Downcut Spiral Bits

Solid Carbide Downcut Spiral Bits
(CMT198-1)

Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors

Technical détails :
- Premium quality HWM.
- 1 spiral cutting edge [Z1].
- Provide an excellent finish on the bottom side of the workpiece.
- Downward chip ejection.

D l L S Rotation Code
6 27 60 6 DROITE CMT19866011

Solid surface and fiberglass bit

Solid surface and fiberglass bitSolid surface and fiberglass bit
(CMT151-1)

For drilling, sizing and jointing fiberglass, phenolic and solid surfaces.
Can be used on machining centers, point to point machines, CNC routers and and held routers equipped with chucks or adaptors.

- Premium quality HWM
- Special positively ground cutting edge sharpening for excellent finish
- AlTiN coated (Superb wear resistance, better chip clearance, superior cutting quality, less overheating, more productivity)

aluminum, plastic and wood-based materials

D I L S Rotation Code
6 19 50 6 DROITE CMT15106019E
6.35 25.4 63.5 6.35 DROITE CMT15106425E
8 25 63 8 DROITE CMT15108025E
12 25 75 12 DROITE CMT15112025E
12.7 38 89 12.7 DROITE CMT15112738E

Solid surface and fiberglass bit

Solid surface and fiberglass bitSolid surface and fiberglass bitSolid surface and fiberglass bit
(CMT151-2)

For drilling, sizing and jointing fiberglass, phenolic and solid surfaces.
Can be used on machining centers, point to point machines, CNC routers and and held routers equipped with chucks or adaptors.

- Premium quality HWM
- Special positively ground cutting edge sharpening for excellent finish
- AlTiN coated (Superb wear resistance, better chip clearance, superior cutting quality, less overheating, more productivity)

aluminum, plastic and wood-based materials

D I L S Rotation Code
6 19 50 6 DROITE CMT15106019D
6.35 25.4 63.5 6.35 DROITE CMT15106425D
8 25 63 8 DROITE CMT15108025D
12 25 75 12 DROITE CMT15112025D
12.7 38 89 12.7 DROITE CMT15112738D

Solid carbide Upcut 2D/3D Carving Tapered Ball Noise Spiral Bit

Solid carbide Upcut 2D/3D Carving Tapered Ball Noise Spiral BitSolid carbide Upcut 2D/3D Carving Tapered Ball Noise Spiral Bit
(CMT152)

Specially designed for 2D and 3D CNC profiling and carving in plastic, aluminum and wood for several uses like:
- A perfect bit for 3D carving
- Precision 2D and 3D large scale carving
- Great for deep profiling
- Dimensional signage
- 3D millwork
- 2D and 3D contouring, profiling, modeling, and pattern making for cabinetry, sign making, furniture making and jewerly mold making.
- Perfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials

- Premium quality HWM
- Upcut spiral cutting edges [Z2/Z3]
- Excellent finish on the lower side of the work piece
- Upward chip ejection

aluminum, plastic and wood-based materials

D R A I L S Z Rotation Code
0.8 0.4 5.5 25 70 6 3 DROITE CMT152060082
0.8 0.4 6.2 25.4 76.2 6.35 3 DROITE CMT152064082
1.6 0.8 4.5 25 70 6 3 DROITE CMT152060162
1.6 0.8 5.4 25.4 76.2 6 DROITE CMT152064162
1.6 0.8 5.5 30 80 8 3 DROITE CMT152080163
2 1 3 80 120 12 2 DROITE CMT152120208
3.2 1.6 2.5 30 70 6 3 DROITE CMT152060323
3.2 1.6 3.6 24.4 76.2 6.35 3 DROITE CMT152064322
3.2 1.6 2.5 50 90 8 3 DROITE CMT152080325
6 3 3 50 100 12 2 DROITE CMT152120605
6.4 3.2 3 50.8 101.6 12.7 2 DROITE CMT152127635