Wood professionals

Discover our entire catalogue.

Drilling system 3

Chrome steel drilling system 3 Ø 15 - 30 mm

Chrome steel drilling system 3 Ø 15 - 30 mmChrome steel drilling system 3 Ø 15 - 30 mm
(ZOBO3-01)

System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The chrome steel drill bit is particularly suitable for soft and hardwood.

Drilling diameter 15 - 30 mm
Shank diameter 9 mm
Total length 100 mm

D S L Code
15 9 100 ZOBO762090
16 9 100 ZOBO762091
17 9 100 ZOBO762092
18 9 100 ZOBO762093
19 9 100 ZOBO762094
20 9 100 ZOBO762095
21 9 100 ZOBO762096
22 9 100 ZOBO762097
23 9 100 ZOBO762098
24 9 100 ZOBO762099
25 9 100 ZOBO762100
26 9 100 ZOBO762101
27 9 100 ZOBO762102
28 9 100 ZOBO762103
29 9 100 ZOBO762104
30 9 100 ZOBO762105

Related products

Carbide drilling system 3 Ø 15-30 mm

Carbide drilling system 3 Ø 15-30 mmCarbide drilling system 3 Ø 15-30 mm
(ZOBO3-02)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The carbide drill bit WD HW is particularly suited for hardwood and boards.
Drilling diameter 15 - 30 mm
Shank diameter 9 mm
Total length 100 mm

D S L Code
15 9 100 ZOBO762339
16 9 100 ZOBO762340
17 9 100 ZOBO762341
18 9 100 ZOBO762342
19 9 100 ZOBO762343
20 9 100 ZOBO762344
21 9 100 ZOBO762345
22 9 100 ZOBO762346
23 9 100 ZOBO762347
24 9 100 ZOBO762348
25 9 100 ZOBO762349
26 9 100 ZOBO762350
27 9 100 ZOBO762351
28 9 100 ZOBO762352
29 9 100 ZOBO762353
30 9 100 ZOBO762354

Related products

Chrome steel drilling system 3 Ø 31-50 mm

Chrome steel drilling system 3 Ø 31-50 mmChrome steel drilling system 3 Ø 31-50 mm
(ZOBO3-03)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 31 - 50 mm
Shank diameter 12 mm
Total length 100 mm

D S L Code
31 12 100 ZOBO762106
32 12 100 ZOBO762107
33 12 100 ZOBO762108
34 12 100 ZOBO762109
35 12 100 ZOBO762110
36 12 100 ZOBO762111
37 12 100 ZOBO762112
38 12 100 ZOBO762113
39 12 100 ZOBO762114
40 12 100 ZOBO762115
41 12 100 ZOBO762116
42 12 100 ZOBO762117
43 12 100 ZOBO762118
44 12 100 ZOBO762119
45 12 100 ZOBO762120
46 12 100 ZOBO762121
47 12 100 ZOBO762122
48 12 100 ZOBO762123
49 12 100 ZOBO762124
50 12 100 ZOBO762125
51 12 100 ZOBO762713

Related products

Carbide drilling system 3 Ø 31-50 mm

Carbide drilling system 3 Ø 31-50 mmCarbide drilling system 3 Ø 31-50 mm
(ZOBO3-04)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The carbide drill bit WD HW is particularly suitable for hardwood and boards.
Drilling diameterge 31 - 50 mm
Shank diameter 12 mm
Total length 100 mm

D S L Code
31 12 100 ZOBO762355
32 12 100 ZOBO762356
33 12 100 ZOBO762357
34 12 100 ZOBO762358
35 12 100 ZOBO762359
36 12 100 ZOBO762360
37 12 100 ZOBO762361
38 12 100 ZOBO762362
39 12 100 ZOBO762363
40 12 100 ZOBO762364
41 12 100 ZOBO762365
42 12 100 ZOBO762366
43 12 100 ZOBO762367
44 12 100 ZOBO762368
45 12 100 ZOBO762369
46 12 100 ZOBO762370
47 12 100 ZOBO762371
48 12 100 ZOBO762372
49 12 100 ZOBO762373
50 12 100 ZOBO762374

Related products

Chrome steel drilling system 3 Ø 50 - 100 mm

Chrome steel drilling system 3 Ø 50 - 100 mmChrome steel drilling system 3 Ø 50 - 100 mmChrome steel drilling system 3 Ø 50 - 100 mm
(ZOBO3-05)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 50 - 100 mm
Shank diameter 20/13 mm
Total length 150 mm

D S L Code
50 20/13 150 ZOBO762126
51 20/13 150 ZOBO762127
52 20/13 150 ZOBO762128
53 20/13 150 ZOBO762129
54 20/13 150 ZOBO762130
55 20/13 150 ZOBO762131
56 20/13 150 ZOBO762132
57 20/13 150 ZOBO762133
58 20/13 150 ZOBO762134
59 20/13 150 ZOBO762135
60 20/13 150 ZOBO762136
61 20/13 150 ZOBO762137
62 20/13 150 ZOBO762138
63 20/13 150 ZOBO762139
64 20/13 150 ZOBO762140
65 20/13 150 ZOBO762141
66 20/13 150 ZOBO762142
67 20/13 150 ZOBO762143
68 20/13 150 ZOBO762144
69 20/13 150 ZOBO762145
70 20/13 150 ZOBO762146
71 20/13 150 ZOBO762147
72 20/13 150 ZOBO762148
73 20/13 150 ZOBO762149
74 20/13 150 ZOBO762150
75 20/13 150 ZOBO762151
76 20/13 150 ZOBO762152
77 20/13 150 ZOBO762153
78 20/13 150 ZOBO762154
79 20/13 150 ZOBO762155
80 20/13 150 ZOBO762156
81 20/13 150 ZOBO762157
82 20/13 150 ZOBO762158
83 20/13 150 ZOBO762159
84 20/13 150 ZOBO762160
85 20/13 150 ZOBO762161
86 20/13 150 ZOBO762162
87 20/13 150 ZOBO762163
88 20/13 150 ZOBO762164
89 20/13 150 ZOBO762165
90 20/13 150 ZOBO762166
91 20/13 150 ZOBO762167
92 20/13 150 ZOBO762168
93 20/13 150 ZOBO762169
94 20/13 150 ZOBO762170
95 20/13 150 ZOBO762171
96 20/13 150 ZOBO762172
97 20/13 150 ZOBO762173
98 20/13 150 ZOBO762174
99 20/13 150 ZOBO762175
100 20/13 150 ZOBO762176

Related products

Carbide drilling system 3 Ø 50-100 mm

Carbide drilling system 3 Ø 50-100 mmCarbide drilling system 3 Ø 50-100 mm
(ZOBO3-06)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The carbide drill bit WD HW is particularly suitable for hardwood and boards.
Drilling diameter 50 - 100 mm
Shank diameter 20/13 mm
Total length 150 mm

D S L Code
50 20/13 150 ZOBO762375
51 20/13 150 ZOBO762376
52 20/13 150 ZOBO762377
53 20/13 150 ZOBO762378
54 20/13 150 ZOBO762379
55 20/13 150 ZOBO762380
56 20/13 150 ZOBO762381
57 20/13 150 ZOBO762382
58 20/13 150 ZOBO762383
59 20/13 150 ZOBO762384
60 20/13 150 ZOBO762385
61 20/13 150 ZOBO762386
62 20/13 150 ZOBO762387
63 20/13 150 ZOBO762388
64 20/13 150 ZOBO762389
65 20/13 150 ZOBO762390
66 20/13 150 ZOBO762391
67 20/13 150 ZOBO762392
68 20/13 150 ZOBO762393
69 20/13 150 ZOBO762394
70 20/13 150 ZOBO762395
71 20/13 150 ZOBO762396
72 20/13 150 ZOBO762397
73 20/13 150 ZOBO762398
74 20/13 150 ZOBO762399
75 20/13 150 ZOBO762400
76 20/13 150 ZOBO762401
77 20/13 150 ZOBO762402
78 20/13 150 ZOBO762403
79 20/13 150 ZOBO762404
80 20/13 150 ZOBO762405
81 20/13 150 ZOBO762406
82 20/13 150 ZOBO762407
83 20/13 150 ZOBO762408
84 20/13 150 ZOBO762409
85 20/13 150 ZOBO762410
86 20/13 150 ZOBO762411
87 20/13 150 ZOBO762412
88 20/13 150 ZOBO762413
89 20/13 150 ZOBO762414
90 20/13 150 ZOBO762415
91 20/13 150 ZOBO762416
92 20/13 150 ZOBO762417
93 20/13 150 ZOBO762418
94 20/13 150 ZOBO762419
95 20/13 150 ZOBO762420
96 20/13 150 ZOBO762421
97 20/13 150 ZOBO762422
98 20/13 150 ZOBO762423
99 20/13 150 ZOBO762424
100 20/13 150 ZOBO762425

Related products

Chrome steel drilling system 3 Ø 101 - 130 mm

Chrome steel drilling system 3 Ø 101 - 130 mmChrome steel drilling system 3 Ø 101 - 130 mm
(ZOBO3-07)


System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 101 - 130 mm
Shank diameter 30/16 mm
Total length 150 mm

D S L Code
101 30/16 150 ZOBO631370
102 30/16 150 ZOBO631371
103 30/16 150 ZOBO631372
104 30/16 150 ZOBO631373
105 30/16 150 ZOBO631374
106 30/16 150 ZOBO631375
107 30/16 150 ZOBO631376
108 30/16 150 ZOBO631377
109 30/16 150 ZOBO631378
110 30/16 150 ZOBO631379
111 30/16 150 ZOBO631380
112 30/16 150 ZOBO631381
113 30/16 150 ZOBO631382
114 30/16 150 ZOBO631383
115 30/16 150 ZOBO631384
116 30/16 150 ZOBO631385
117 30/16 150 ZOBO631386
118 30/16 150 ZOBO631387
119 30/16 150 ZOBO631389
120 30/16 150 ZOBO631390
121 30/16 150 ZOBO631391
122 30/16 150 ZOBO631392
123 30/16 150 ZOBO631393
124 30/16 150 ZOBO631394
125 30/16 150 ZOBO631395
126 30/16 150 ZOBO631397
127 30/16 150 ZOBO631398
128 30/16 150 ZOBO631399
129 30/16 150 ZOBO631400
130 30/16 150 ZOBO631401

Related products

Guide pin

Guide pin
(ZOBO3-09)

Guide pin with centre hole of diameter 6 mm for WD C 15-50 and WD HW 15-50.

D Code
5 ZOBO762714
6 ZOBO762213
7 ZOBO762214
8 ZOBO762215
9 ZOBO762216
10 ZOBO762217
11 ZOBO762218
12 ZOBO762219
13 ZOBO762220
14 ZOBO762221
15 ZOBO762222
16 ZOBO762223
17 ZOBO762224
18 ZOBO762225
19 ZOBO762226
20 ZOBO762227
25 ZOBO762712

Related products

Set of system 3 drill bits

Set of system 3 drill bits
(ZOBO3-10)

Set supplied in a mini-SYSTAINER.

Set of chrome steel drill bits
Including: - drill bits D15 - 20 - 25 - 30 - 35 mm - 1 centering point 6x6.0 - 1 pilot drill 6x20 - 1 Allen wrench ZOBO762207 Chrome steel drill bit set
Including: - drill bits D15 - 20 - 25 - 30 - 35 mm - 1 centering point 6x6.0 - 1 pilot drill 6x20 - 1 Allen wrench - 1 extension 9x150 - 1 extension 12x150 ZOBO623719 Carbide drill bit set
Including: - drill bits D15 - 20 - 25 - 30 - 35 mm - 1 centering point 6x6.0 - 1 pilot drill 6x20 - 1 Allen wrench ZOBO762426 Carbide drill bit set
Including: - drill bits D15 - 20 - 25 - 30 - 35 mm - 1 centering point 6x6.0 - 1 pilot drill 6x20 - 1 Allen wrench - 1 extension bar 9x150 - 1 extension bar 12x150 ZOBO623720

Related products

Depth stop

Depth stop
(ZOBO3-11)

Code
Depth stop
To limit the cutting depth with STL type system 3 drill bits from diameter 101mm.
ZOBO631402
Drill guide
To adjust the cutting depth with STL type system 3 drill bits from diameter 101mm.
ZOBO631369

Related products

Countersink set

Countersink set
(ZOBO3-12)

In a size 1 SYSTAINER with beech lining.

Including the references:
- ZOBO762126 - ZOBO762136 - ZOBO762141 - ZOBO762146 - ZOBO762156 - ZOBO762232 - ZOBO762236 - ZOBO762240 - ZOBO762244 - ZOBO762589

Code
Countersink set including :
- Special chrome steel drill bit WD C D50 - 60 - 65 - 70 - 80 - Guide pin D13.5 - 17.5 - 21.5 - 25.5 mm - Depth adjusting device for drill bit 50-100 mm - Allen wrench
ZOBO762208

Related products

Centering point and pilot drill

Centering point and pilot drill
(ZOBO3-13)

D L Code
10 9 Centering point for WD C 50-130 mm and WD HW 50-100 mm ZOBO762621
10 10 Pilot drill for WD C 50-130 mm and WD HW 50-100 mm ZOBO629393
10 85 Pilot drill for WD C 50-130 mm and WD HW 50-100 mm ZOBO762618

Related products

Guide pin

Guide pin
(ZOBO3-14)

Guide pin with centre hole of diameter 10 mm for WD C 50-130 and WD HW 50-130.

D Code
10.5 ZOBO762229
11.5 ZOBO762230
12.5 ZOBO762231
13.5 ZOBO762232
14.5 ZOBO762233
15.5 ZOBO762234
16.5 ZOBO762235
17.5 ZOBO762236
18.5 ZOBO762237
19.5 ZOBO762238
20.5 ZOBO762239
21.5 ZOBO762240
22.5 ZOBO762241
23.5 ZOBO762242
24.5 ZOBO762243
25.5 ZOBO762244

Related products

Extensions and shanks

Extensions and shanks
(ZOBO3-15)

L D SW Code
20 60 M12 / SW17 Drill extension D50-100mm ZOBO762599
20 300 M12 / SW17 Drill extension D50-100mm ZOBO762600
30 60 M16 / SW27 Drill extension D101-130mm ZOBO762601
30 300 M16 / SW27 Drill extension D101-130mm ZOBO762602
12 55 M12 / SW17 Drill extension D50-100mm ZOBO761973
16 55 M12 / SW17 Drill extension D50-100mm ZOBO761974
12 100 M16 / SW27 Drill extension D50-100mm ZOBO761977
16 100 M16 / SW27 Extension for drill D101-130mm ZOBO761980
20 100 M16 / SW27 Extension for drill D101-130mm ZOBO761981
M12 Taper shank for drill bit D50-100mm ZOBO762447
M16 Taper shank for drill bit D101-130mm ZOBO762448
13 55 M12/ SW17 Shank for power drill for drill bit of D50-100mm ZOBO761975
16 55 M12 / SW17 Shank for power drill for drill bit of D50-100mm ZOBO761976
13 100 M12 / SW17 Shank for power drill for drill bit of D50-100mm ZOBO629394
16 100 M12 / SW17 Shank for power drill for drill bit of D50-100mm ZOBO761978
16 100 M16 / SW27 Shank for power drill for drill bit of D101-130mm ZOBO761982
20 100 M16 / SW27 Shank for power drill for drill bit of D101-130mm ZOBO761983

Related products

Depth stop