water cooled sharpening system tormek®

water cooled sharpening system tormek® (51)

Thursday, 05 January 2017 18:24

TORMEK® T-8 Water Cooled Sharpening System

Written by
TORMEK® T-8 Water Cooled Sharpening SystemTORMEK® T-8 Water Cooled Sharpening System
(TORM01-AFF-T8)

TORMEK® T-8 maximises the precision thanks to the revolutionary fully cast housing which guarantees minimal play for the Universal support. This gives you the best conditions possible to succeed with your sharpening. TORMEK®'s unique drive system is efficient and manages to hold a constant speed, even under full load. The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.

Dimensions
Width 270 mm (10 5/8”), Depth 270 mm (10 5/8”), Height 330 mm (12”) Weight
Shipping weight 18.2 kg (40.1 lbs), Machine only 14.8 kg (32.6 lbs) Grindstone
TORMEK® Original Grindstone, Aluminium oxide, 250×50 mm (10”×2”) 90 rpm, torque 14.7 Nm Leather Honing Wheel
220×31 mm (8 5/8”×1¼”) Main Shaft
Stainless steel main shaft, stone hardware and EzyLock. Housing
Zinc cast top and frame. Sides in ABS plastic. Motor
Industrial single phase, 200 W (input) 230 V, 50 Hz or 115 V, 60 Hz. Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life

Code
TORMEK® T8 Original TORMT8
Thursday, 05 January 2017 18:24

Turning Tool Setter TTS-100

Written by
Turning Tool Setter TTS-100
(TORM04-01)

Replicates the geometry on turning gouges and skews when using the SVD-186 and SVS-50 jigs. Also designed for pre-set bevels.

Code
TORMTTS100
Thursday, 05 January 2017 18:24

Spare parts TORMEK®

Written by
Spare parts TORMEK®
(TORM05-01)

With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.
Ø; stone: 250 mm

Code
TORMMSK250
Wheels Ø250 compatible with Tormek® T-8 water cooled and T-8 custom sharpening systems
(TORM06-01)

The Tormek grindstones are well known for grinding efficiency and extended stone life. If you take good care of your stone, you can expect to use it for many years to come. Presentation of the range
There are four different types of grindstones, all optimised with the special qualities required for different applications. Common to all the Tormek® grindstones is that they are designed to give your tool a sharp and durable edge . Original grindstone
The original Tormek® grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and long life.

The Tormek® Blackstone Silicon grindstone is more aggressive than the original Tormek® grindstone. It is developed for HSS, other exotic alloyed steels and wide bevel tools. It can also work with tungsten carbide. Japanese grindstone
The Tormek® Japanese Waterstone has a grit size of 4,000 and provides an excellent surface finish on hand tools requiring little sharpening. It is ideal for sharpening carving tools. Designed to achieve the smoothest possible surface, it removes very little material and therefore cannot be used to form a tool edge. Diamond wheel
The new Tormek® diamond wheels come in three different finishes: coarse, fine and extra fine. The quality of the diamond surface gives a high and constant sharpening capacity, so the wheel always keeps the same diameter. Users who frequently sharpen the same tool will appreciate this feature which simplifies both set-up and sharpening.

Tormek Original Grindstone (Ø 250)
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. This stone efficiently cuts all types of tools and steel qualities including HSS. Ø250 mm TORMSG250 Grindstones Blackstone Silicon SB-250 (Ø 250)
Tormek Blackstone delivers faster steel removal on HSS and other exotic alloys than Tormek Original Grindstone. Suitable for tools with large bevel area. It can also touch up carbide. 220 grit. TORMSB250 Japanese waterstone (Ø 250)
This stone provides an extra fine surface finish on hand tools where a minimum of steel removal is needed. Ideal for carving tools. 4000 grit. Available in two sizes, 250 mm (for T-8, T-7 and 2000 models) and 200 mm (for T-4, T-3 and 1200 models). Since it is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping a tool. TORMSJ250 Diamond Wheel Coarse (Ø 250) TORMDC250 Diamond Wheel Fine (Ø 250) TORMDF250 Diamond Wheel Extra Fine (Ø 250) TORMDE250
Friday, 25 May 2018 05:00

TORMEK® sharpening station

Written by
TORMEK® sharpening stationTORMEK® sharpening stationTORMEK® sharpening stationTORMEK® sharpening stationTORMEK® sharpening station
(TORM07-01)

Top quality sharpening cabinet.
With comfortable work in mind, this sharpening station is adjustable in height.
Drawers specially designed to fit the TORMEK® accessory kits. Practical storage for all sharpening accessories and devices.
Sturdy steel design with scratch resistant metallic coating and rounded corners. The TORMEK® sharpening station will fit easily into your workshop!

Dimensions
Height: between 750 mm to 830 mm
Width: 578 mm
Depth: 390 mm

Code
Sharpening Station
Top quality sharpening cabinet with purposed designed drawers to fit the Tormek accessory kits. Convenient storage for all the jigs and accessories needed for sharpening all kinds of edge tools. Sturdy steel design with scratch resistant metallic coating, rounded corners and Tormek logo. Fits easily into your workshop and you will be able to adjust to your ideal working height. Height 750-830 mm (29½"–32½"), width 578 mm (22¾"), depth 390 mm (153/8").
TORMTS740
Wednesday, 10 February 2021 04:01

TNT-300 woodturner's instruction box

Written by
TNT-300 woodturner\'s instruction box
(TORM09-01)

The Tormek® instruction box, which contains a DVD film and a manual, shows how to shape and sharpen all turning tools.

Code
TORMTNT300
Thursday, 11 February 2021 04:01

TNT-00 storage tray

Written by
TNT-00 storage tray
(TORM08-01)

The TNT-00 storage tray stores all the jigs included with the Woodturner's Kit.

Code
TORMTNT00
Wednesday, 10 February 2021 04:01

HTK808 woodturner's kit

Written by
HTK808 woodturner\'s kitHTK808 woodturner\'s kitHTK808 woodturner\'s kitHTK808 woodturner\'s kit
(TORM02-KIT_HTK806)

This kit includes all the jigs you need to sharpen your knives, chisels, planes and axes, as well as short chisels and cutting tools. The perfect kit to sharpen all your hand tools! The jigs are packed in the Tormek® Case TC-800 with the HTK-00 storage tray. The Tormek® case simplifies the storage of your jigs and accessories. The premium leather handle makes it easy to carry. The Tormek® Case is made of durable material with a sliding lid that keeps everything in place. The storage tray is made of a durable permanent construction material and ready for many years of holding jigs in their places.

Code
TORMHTK806
Wednesday, 10 February 2021 04:01

AngleMaster WM-200

Written by
AngleMaster WM-200
(TORM04-03)

Mesure et règle l'angle du biseau.
Ajustable sur tout diamètre de meule de 210 à 150 mm de diamètre. Mesure de 10° à 75°.

Code
TORMWM200
Thursday, 11 February 2021 04:01

MSK-200 stainless steel shaft

Written by
MSK-200 stainless steel shaft
(TORM05-02)

With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.
Ø; stone: 250 mm

Code
TORMMSK200
Thursday, 11 February 2021 04:01

HTK-00 storage tray

Written by
HTK-00 storage tray
(TORM08-02)

The HTK-00 storage tray stores all the jigs included with the Hand Tool Kit.

Code
TORMHTK00
Wheels Ø200 compatible with Tormek® T-4 water cooled and T-4 bushcraft sharpening systems
(TORM06-02)

The Tormek grindstones are well known for grinding efficiency and extended stone life. If you take good care of your stone, you can expect to use it for many years to come. Presentation of the range
There are four different types of grindstones, all optimised with the special qualities required for different applications. Common to all the Tormek® grindstones is that they are designed to give your tool a sharp and duraone has evolved over the years to offer the best combination of efficient steel reble edge . Original grindstone
The original Tormek® grindstmoval, smooth surface finish and long life. Japanese grindstone

The Tormek® Japanese Waterstone has a grit size of 4,000 and provides an excellent surface finish on hand tools requiring little sharpening.. It is ideal for sharpening carving tools. Designed to achieve the smoothest possible surface, it removes very little material and therefore cannot be used to form a tool edge. Diamond wheel
The new Tormek® diamond wheels come in three different finishes: coarse, fine and extra fine. The quality of the diamond surface gives a high and constant sharpening capacity, so the wheel always keeps the same diameter. Users who frequently sharpen the same tool will appreciate this feature which simplifies both set-up and sharpening.

Code
Tormek Original Grindstone (Ø 200)
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. This stone efficiently cuts all types of tools and steel qualities including HSS. Ø200 mm
TORMSG200
Japanese waterstone (Ø 200)
This stone provides an extra fine surface finish on hand tools where a minimum of steel removal is needed. Ideal for carving tools. 4000 grit. Available in two sizes, 250 mm (for T-8, T-7 and 2000 models) and 200 mm (for T-4, T-3 and 1200 models). Since it is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping a tool.
TORMSJ200
Diamond Wheel Coarse (Ø 200) TORMDC200
Diamond Wheel Fine (Ø 200) TORMDF200
Diamond Wheel Extra Fine (Ø 200) TORMDE200
Thursday, 15 October 2020 05:00

TORMEK® T8 Custom sharpening system

Written by
TORMEK® T8 Custom sharpening systemTORMEK® T8 Custom sharpening system
(TORM01-AFF-T8CUSTOM)

Customise your own water cooled sharpening system with our Tormek T-8 Custom. This package enables you to create your own Tormek sharpening system, with your favourite accessories. Just add a grinding wheel, a honing wheel, the right jigs and your own creativity. The Tormek T-8 Custom includes a clean Tormek T-8 sharpening machine without grinding wheel and honing wheel.
The package includes just the essential Tormek accessories:
- Tormek HB-10 handbook on sharpening
- WM-200 angle master to measure the edge angle
- US-105 universal support to give support for the jigs
- Tormek instructional DVD You decide the other accessories you want to add separately.

Dimensions
Width: 270 mm - Depth: 270 mm - Height: 286 mm Weight
Machine packaged: 11.5 kg - Machine alone: 9.3 kg Main shaft
Main shaft, accessories and EzyLock made of stainless steel Frame
Top and frame made of cast zinc;
Sides made of plastic ABS Motor
Industrial single phase
200 W (input power) 230V, 50 Hz or 115V, 60 Hz
&Continuous operation. No maintenance.
Silent running, 54 dB
Service life 25,000 hours

Code
TORMT8CUSTOM
Wednesday, 10 February 2021 04:01

SVM-00 small knife holder

Written by
SVM-00 small knife holder
(TORM03-02)

For sharpening very small knives such as penknives and carving knives.

Code
TORMSVM00
Thursday, 05 January 2017 18:24

TORMEK® T-4 Water Cooled Sharpening System

Written by
TORMEK® T-4 Water Cooled Sharpening SystemTORMEK® T-4 Water Cooled Sharpening System
(TORM01-AFF-T4)

TORMEK® T-4 is an enhancement of the T-3 model taking the precision and stability to a completely new level. Vital functions like the motor and the main shaft are mounted in the zinc cast top which includes the integrated sleeves for the Universal Support. This advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the TORMEK® jig system.
You get a high quality machine ideal for home and hobby work which can sharpen all the common edge tools. Delivered with the Stone Grader SP-650, AngleMaster WM-200, Honing compound, DVD and the comprehensive Tormek Handbook on sharpening. Configure the T-4 with your choice of jigs according to the tools that you are choosing to sharpen. The jigs are sold separately.

Dimensions:
Width 230 mm (9 1/16”), Depth 200 mm (7 7/8”), Height 260 mm (10¼”)
Weight:
Shipping weight 9.8 kg, Machine only 8.0 kg
Grindstone:
TORMEK® Original Grindstone, Aluminium oxide, 200×40 mm (8”×1 5/8”) 120 rpm, torque 8.4 Nm
Leather Honing Wheel:
145×26 mm (5¾”×1”)
Main Shaft:
Stainless steel main shaft and stone hardware. EzyLock in composite.
Housing:
Zinc cast top, Impact resistant ABS plastic

Motor:
Industrial single phase, 120 W (input)
230 V, 50 Hz or 115 V, 60 Hz. Duty 30 min/hour, Maintenance free.
Silent running, 54 dB. 10,000 hour life

Code
TORMEK® T4 Original TORMT4
Wednesday, 10 February 2021 04:01

Profiled Honing Wheels LA-120

Written by
Profiled Honing Wheels LA-120
(TORM04-02)

For the inside honing and polishing of turning/carving gouges and V-tools.
Set of two discs, one with a 3 mm (⅛") radius and one with a 60° tip.

Code
TORMLA120
Thursday, 11 February 2021 04:01

Advanced water trough

Written by
Advanced water trough
(TORM05-03)

The trough has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.

Code
Tormek® T2000 / Tormek® T7 TORMAWT250
Tormek® T8 TORMR3090
Tormek® T3 / Tormek® T4 TORMWT200
Thursday, 11 February 2021 04:01

Tormek® Case TC-800

Written by
Tormek® Case TC-800Tormek® Case TC-800Tormek® Case TC-800
(TORM08-03)

The Tormek Case keeps your jigs and accessories organised. It is easy to carry thanks to the premium leather handle.

Code
TORMTC800
Saturday, 13 February 2021 04:01

Composite Honing Wheel CW-220

Written by
Composite Honing Wheel CW-220
(TORM04-11)

The easy to use composite honing disc has a built-in polishing agent that removes the hard edge.
Suitable for use in clean environments. No need to add hone compound. Compatible with Tormek® T-8, Tormek® T-7 and Tormek® 2000. Tip when honing!
Moisten the composite honing disc with a little water for smoother honing. Use a sponge or cloth.

Code
TORMCW220
Thursday, 11 February 2021 04:01

Rubber wheel R-21 / R-23

Written by
Rubber wheel R-21 / R-23
(TORM05-04)

Drive wheels for the Tormek® water cooled sharpening machine.

Code
Tormek® T-3 / Tormek® T-4 / Tormek® Supergrind 1200 TORMR21
Tormek® T-7 / Tormek® T-8 / Tormek® Supergrind 2000 TORMR23
Thursday, 11 February 2021 04:01

RM-533 rubber mat

Written by
RM-533 rubber mat
(TORM08-04)

The rubber mat dampens vibrations but also provides
a water proof yet non slip surface during sharpening. The raised rim will retain any water spillage.
Dimension: 533 × 343 mm.
(supplied with Tormek® sharpening station)

Code
TORMRM533
TORMEK® T-4 Water Cooled Sharpening System Bushcraft editionTORMEK® T-4 Water Cooled Sharpening System Bushcraft edition
(TORM01-AFF-T4-B)

This edition is especially targeting the outdoor market and all the equipment needed to sharpen knives and axes is provided straight out of the 'special value' box.
Included in the box is the Knife Jig SVM-45, the Axe Jig SVA-170. You also get TORMEK® T-4’s standard accessories: the Stone Grader SP-650, the AngleMaster WM-200, the Honing Compound PA-70, TORMEK®'s Handbook on sharpening and an instructional DVD.
With this equipment, you can sharpen almost every type of knife (including kitchen knives) and axes. Sharpening with TORMEK® is safe and give your tools a long-lasting razor edge.

Dimensions:
Width 230 mm (9 1/16”), Depth 200 mm (7 7/8”), Height 260 mm (10¼”)
Weight:
Shipping weight 9.8 kg, Machine only 8.0 kg
Grindstone:
TORMEK® Original Grindstone, Aluminium oxide, 200×40 mm (8”×1 5/8”) 120 rpm, torque 8.4 Nm
Leather Honing Wheel:
145×26 mm (5¾”×1”)
Main Shaft:
Stainless steel main shaft and stone hardware. EzyLock in composite.
Housing:
Zinc cast top, Impact resistant ABS plastic

Motor:
Industrial single phase, 120 W (input)
230 V, 50 Hz or 115 V, 60 Hz. Duty 30 min/hour, Maintenance free.
Silent running, 54 dB. 10,000 hour life

Code
TORMEK® T4 Bushcraft TORMT4BUSHCRAFT
Wednesday, 10 February 2021 04:01

Truing Tool TT-50

Written by
Truing Tool TT-50
(TORM04-04)

Trues the grindstone exactly round and flat.
Guided by the universal support. Dual knobs for smooth feed across the stone.

Code
TORMTT50
Thursday, 11 February 2021 04:01

Universal support US-103 / US-105

Written by
Universal support US-103 / US-105
(TORM05-05)

The Universal support is the basis for all Tormek® jigs. It has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth.

Code
Tormek® T-3 / Tormek® T-4 TORMUS103
Tormek® T-8 TORMUS105
Thursday, 11 February 2021 04:01

MH-380 protective cover

Written by
MH-380 protective cover
(TORM08-05)

Protects your machine from shavings and wood dust. 100 % cotton.
Fits all Tormek® models.

Code
TORMMH380
Wednesday, 10 February 2021 04:01

Stone Grader SP-650

Written by
Stone Grader SP-650
(TORM04-06)

The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding.

Code
TORMSP650
Page 1 of 2