Panels
Sets of 3 blades for radial arm saws
Set of 3 carbide circular saw blades for cutting and formatting wood and timber. Diameters available:
- Ø 216 - Al. : 30
Kerf: 2.8 - Body: 1.8 - Z: 24 - Application: Cut - Type: ATB NEG
Kerf: 2.8 - Body: 1.8 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 2.3 - Body: 1.6 - Z: 60 - Application: Finishing - Type : ATB NEG
Ref.: LC216X3-2
Kerf: 2.8 - Body: 1.8 - Z: 24 - Application: Cut - Type: ATB NEG
Kerf: 2.8 - Body: 1.8 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 2.8 - Body: 1.8 - Z: 60 - Application: Panels + Alu - Type: NF TF NEG
- Ø 254 - Al. : 30
Kerf: 2.4 - Body: 1.8 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 2.4 - Body: 1.8 - Z: 60 - Application: Finishing - Type : ATB NEG
Kerf: 2.4 - Body: 1.8 - Z: 80 - Application: Panels + Alu - Type: NF TF NEG
- Ø 260 - Al. : 30
Kerf: 2.5 - Body: 1.8 - Z: 24 - Application: Cut - Type: ATB NEG
Kerf: 2.5 - Body: 1.8 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 2.5 - Body: 1.8 - Z: 60 - Application: Finishing - Type : ATB NEG
Ref.: LC260X3-2
Kerf: 2.5 - Body: 1.8 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 2.5 - Body: 1.8 - Z: 60 - Application: Finishing - Type : ATB NEG
Kerf: 2.5 - Body: 1.8 - Z: 80 - Application: Panels + Alu - Type: NF TF NEG
- Ø 305 - Al. : 30
Kerf: 3.2 - Body: 2.2 - Z: 60 - Application: Universal - Type: ATB NEG
Kerf: 3.2 - Body: 2.2 - Z: 80 - Application: Finishing - Type : ATB NEG
Kerf: 3.2 - Body: 2.5 - Z: 96 - Application: Panels + Alu - Type: NF TF NEG
Ref.: LC305X3-2
Kerf: 3.2 - Body: 2.2 - Z: 48 - Application: Universal - Type: ATB NEG
Kerf: 3.2 - Body: 2.2 - Z: 60 - Application: Finishing - Type : ATB NEG
Kerf: 2.6 - Body: 1.8 - Z: 80 - Application: Panels + Alu - Type: NF TF NEG
Ø | Al | Code |
---|---|---|
LC216X3 | ||
LC216X3-2 | ||
254 | 30 | LC254X3 |
260 | 30 | LC260X3 |
260 | 30 | LC260X3-2 |
305 | 30 | LC305X3 |
305 | 30 | LC305X3-2 |
Positive carbide tipped trapezoidal toothing

Carbide tipped circular recoil saw blade for cutting and panel formatting - Heller toothing.
plywood
Ø | Kerf | Body | Z | Al | Type | Code |
---|---|---|---|---|---|---|
250 | 3.2 | 2.2 | 60 | 30 | TF POS | LC2506009M |
350 | 3.5 | 2.5 | 84 | 30 | TF POS | LC3508409M |
350 | 3.5 | 2.5 | 108 | 30 | TF POS | LC35010810M |
Related products
Positive carbide tipped trapezoidal toothing low noise
Negative carbide tipped trapezoidal toothing

Carbide tipped circular recoil saw blade for cutting and panel formatting. Negative rake angle for a better fit on the working table.
plywood
Ø | Kerf | Body | Z | Al | Type | Code |
---|---|---|---|---|---|---|
250 | 3.2 | 2.2 | 48 | 30 | TF NEG | LC2504804 |
250 | 3.2 | 2.2 | 60 | 30 | TF NEG | LC2506010M |
255 | 3.2 | 2.2 | 100 | 30 | TF NEG | LC25510001M |
300 | 3.5 | 2.5 | 72 | 30 | TF NEG | LC3007205M |
300 | 3.5 | 2.5 | 96 | 30 | TF NEG | LC3009613M |
330 | 3.7 | 2.5 | 102 | 30 | TF NEG | LC33010201M |
Diamond tooth




High quality circular saw blade for formatting requiring optimal cutting quality and a longer life for cutting abrasive materials.
Height 4mm : Sharpening 6-7 times.
Height 6mm : Sharpening 8-10 times.
Ø | Kerf | Body | Z | Al | Type | Code | |
---|---|---|---|---|---|---|---|
250 | 3.2 | 2.2 | 60 | 30 | TF POS | Height 4mm | DIAM2506001 |
250 | 3.2 | 2.2 | 60 | 30 | TF POS | Height 6mm | DIAM2506002 |
300 | 3.2 | 2.2 | 60 | 30 | TF POS | Height 4mm | DIAM3006001 |
300 | 3.2 | 2.2 | 60 | 30 | TF POS | Height 6mm | DIAM3006002 |
300 | 3.2 | 2.2 | 72 | 30 | TF POS | Height 4mm | DIAM3007201 |
300 | 3.2 | 2.2 | 72 | 30 | TF POS | Height 6mm | DIAM3007202 |
Set of circular blades and diamond scoring blade
Set of circular diamond blades and top-of-the-range diamond scoring blade for formatting requiring optimum cutting quality and increased life when cutting abrasive materials.
Ø | Kerf | Body | Z | Al | Type | Code | |
---|---|---|---|---|---|---|---|
300 | 3.2 | 2.2 | 60 | 30 | TF POS | Tipped scoring blades D80 al20 Z10+10 | ELLOTDIA3008020 |
300 | 3.2 | 2.2 | 60 | 30 | TF POS | Tipped scoring blades D120 al20 Z12+12 | ELLOTDIA30012020 |
300 | 3.2 | 2.2 | 60 | 30 | TF POS | Tipped scoring blades D120 al20 Z12+12 | ELLOTDIA30012022 |
Hollow tooth

Carbide tipped circular saw blade for panel formatting requiring excellent finishing quality.
plywood
Ø | Kerf | Body | Z | Al | Type | Code |
---|---|---|---|---|---|---|
250 | 3.2 | 2.2 | 48 | 30 | HFP | LC2504806M |
303 | 3.2 | 2.2 | 60 | 30 | HFP | LC3006007M |
303 | 3.2 | 2.2 | 72 | 30 | HFP | LC3007231 |
Related products
Negative hollow tooth
Carbide tipped conical scoring blades

Conical scoring blade to cut the plated side of the panel and prevent splinters when formatting.
wood, panels, plywood
Ø | Kerf | Body | Z | Al | Type | Code |
---|---|---|---|---|---|---|
90 | 3.0/4.1 | 2.2 | 12 | 30 | ICP | LC901201 |
100 | 3.1/4.3 | 2.2 | 20 | 20 | ICP | LC1002003 |
120 | 3.1/4.3 | 2.2 | 20 | 20 | ICP | LC1202001M |
120 | 3.4/4.5 | 2.2 | 20 | 20 | ICP | LC1202409M |
125 | 3.4/4.5 | 2.2 | 24 | 20 | ICP | LC1252402 |
150 | 3.1/4.3 | 2.2 | 36 | 30 | ICP | LC1503607 |
150 | 3.4/4.5 | 2.2 | 36 | 30 | ICP | LC1503613 |
Extensible carbide tipped scoring blades

Extensible scoring blade to cut the plated side of the panel and prevent splinters when formatting.
wood, panels, plywood
Ø | Kerf | Body | Z | Al | Type | Code |
---|---|---|---|---|---|---|
70 | 2.8/3.6 | 2.2 | 8+8 | 20 | IXP | LC701601 |
80 | 2.8/3.6 | 2.2 | 10+10 | 20 | IXP | LC802001 |
100 | 2.8/3.6 | 2.2 | 10+10 | 20 | IXP | LC1002001 |
100 | 2.8/3.6 | 2.2 | 10+10 | 22 | IXP | LC1002002 |
120 | 2.8/3.6 | 2.2 | 12+12 | 20 | IXP | LC1202407M |
120 | 2.8/3.6 | 2.2 | 12+12 | 22 | IXP | LC1202408M |
125 | 2.8/3.6 | 2.2 | 12+12 | 20 | IXP | LC1252403 |
125 | 2.8/3.6 | 2.2 | 12+12 | 22 | IXP | LC1252404 |
Extensible carbide tipped scoring blades for system without adjusting rings

Extensible scoring blade to cut the plated side of the panel and prevent splinters when formatting.
Ø | Kerf | Body | Z | Al | Type | Code | |
---|---|---|---|---|---|---|---|
120 | 2.8/3.8 | 2.2 | 12+12 | 50 | IXP | ALTENDORF | LC1202414M |
120 | 2.8/3.8 | 2.2 | 12+12 | 50 | IXP | MARTIN | LC1202416M |
125 | 2.8/3.6 | 2.2 | 12+12 | 30 | IXP | GRIGGIO | LC1252410M |
125 | 4.0/4.4 | 2.2 | 20+20 | 20 | IXP | GABBIANI | LC1252418M |
Extensible diamond scoring blades



Extensible diamond scoring blade to cut the plated side of the panel and prevent splinters when formatting.
Height 4mm : Sharpening 6-7 times.
Height 6mm : Sharpening 8-10 times.
Ø | Kerf | Body | Z | Al | Type | Code | |
---|---|---|---|---|---|---|---|
120 | 3.6 | 2.8 | 20 | 20 | IXP | Height 4mm | DIAM1202001 |
120 | 3.6 | 2.8 | 20 | 20 | IXP | Height 6mm | DIAM1202004 |
120 | 3.6 | 2.8 | 20 | 22 | IXP | Height 4mm | DIAM1202002 |
120 | 3.6 | 2.8 | 20 | 22 | IXP | Height 6mm | DIAM1202005 |
125 | 3.6 | 2.8 | 24 | 20 | IXP | Height 4mm | DIAM1252402 |
125 | 3.6 | 2.8 | 24 | 20 | IXP | Height 6mm | DIAM1252406 |
125 | 3.6 | 2.8 | 24 | 22 | IXP | Height 4mm | DIAM1252403 |
125 | 3.6 | 2.8 | 24 | 22 | IXP | Height 6mm | DIAM1252407 |