Wood professionals

Discover our entire catalogue.

Carpenter's square

Carpenter\'s square
(MESU018-01)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Engraved and lacquered marks. Internal and external dimensions in cm and mm.

Length Code
300 x 150 mm MESU10451
500 x 250 mm MESU10450

Related products

Square 115 x 150 mm

Square 115 x 150 mm
(MESU018-04)

Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.

Length Code
115 x 150 mm MESU62110

Related products

Digital thickness gauge

Digital thickness gauge
(MESU030-01)

Reading 1/10. Steel arm - ABS handle
also measures the thickness of brake pads (automotive industry)

Arm length: 138 mm
Total legngth: 313 mm
Handle length: 100 mm
Weight: 200 g

Code
MESU263005

Bevel scale with level 120 x 240mm

Bevel scale with level 120 x 240mm
(MESU020-01)

Tool for setting or placing battens. Can be used to reproduce a slope by steadying the relevant angle in degrees.

Length Code
120 x 240 mm MESU78546

Related products

LYRA Dry Construction Marker

LYRA Dry Construction Marker
(MARQ009-01)

- Ideal for use with one hand with slide mechanism
- For all surfaces (wood, metal, plastic, glass, ceramic, etc.)
- Sharpener included in cap, secured by bayonet fastener
- 2B graphite lead, Ø2.8mm, refilled from the front of the marker
- Easy to erase from smooth surfaces
- Leads sold separately
- Ergonomic triangular shape

Stainless steel rule hard chrome finish

Stainless steel rule hard chrome finish
(MESU033-01)

- Hard chrome finish (matte processed) to prevent glare and make graduation easy to see
- Etching and plating finish maintains its performance even under harsh conditions
- Inch conversion chart and tap drill size chart on back (15 cm - 1 m)

For measuring length, drawing lines and marking

Length Code
150 mm MESU13005
300 mm MESU13013
600 mm MESU13021
1000 mm MESU13048

Aluminium sliding T bevel

Aluminium sliding T bevel
(MESU017-01)

30mm-wide arm equivalent to a carpenter's gauge. Graduation: cm and mm on one side, degrees on the other side. Non overlapping heel for measurement.

Length Code
300 mm MESU62660
450 mm MESU62661
600 mm MESU62662

Related products

Carpenter's square 300 x 150 mm

Carpenter\'s square 300 x 150 mm
(MESU018-02)

Super thin stainless steel square. Perfect for drawing on working drawings and cheek walls. Internal and external dimensions in cm and mm.

Length Code
300 x 150 mm MESU12325

Related products

Square 170 x 100 mm

Square 170 x 100 mm
(MESU018-03)

Super thin multifunction square with slight heel. For drawing on wall plates, 90°, 45° and 135° angles. Also used as a marking gauge.

Length Code
170 x 100 mm MESU62081

Related products

Digital bevel scale 107 x 230mm

Digital bevel scale 107 x 230mm
(MESU020-02)

Tool for measuring slopes. Quick reading.

Length Code
107 x 230 mm MESU78545

Related products

Stair measuring tool

Stair measuring tool
(MESU031-01)

The stair measuring tool measures all shapes of steps. It is particularly suitable for making templates. All the gauges - 60, 80 or 100 cm - are connected to a central point to pivot.

To easily measure the shape of steps
Made of hardened steel

Length Code
60 - 80 - 100 MESUT500

Rule stop

Rule stop
(MESU033-02)

Length Code
150 mm MESU76745
300 mm MESU76746
600 mm MESU76747
1000 mm MESU76748

LYRA DRY PROFI LED marker

LYRA DRY PROFI LED markerLYRA DRY PROFI LED marker
(MARQ009-06)

- Built-in LED spot light for precise application in dimly lit areas
- Ready to use, batteries already inserted
- Optimum positioning of LED spot light: push button on marker for simple and immediate use of LED spot light as required
- Top quality marker with automatic lead feed in high strength stainless steel tube
- Strong cap with improved clip easy to use with one hand
- Built-in sharpener with guide well thereby allowing for quick and easy sharpening without having to remove the cap from pocket
- Fitted with special all surface graphite lead (wood, metal, glass, ceramic, etc.) - writing easy to clean off smooth surfaces with a damp cloth
- Easy refilling of leads from front or rear of marker
- Multi-use thanks to coloured leads, for light or dark surfaces, erasable or water-proof. Available with sets of colours or one colour - leads refilled at front or rear of marker

Colour Code
GRAPHITE Display of 12 markers + 12 cases of 12 leads (8 graphites + 4 basics) MARQ9330
GRAPHITE Sold individually MARQ9329

Aluminium false square

Aluminium false square
(MESU017-02)

250mm length. Light for inside and outside corners. Extra flat double-sided heel. Locking knob.

Length Code
250 mm MESU33921

Related products

Diameter taper gauge

Diameter taper gaugeDiameter taper gaugeDiameter taper gauge
(MESU027-01)

A compact diameter taper gauge and ruler all in one.
Handy clip for depth measurement and to store the tool in your pocket.

Thickness : ​1.2mm 
Precision : 0.05mm 
Materiel : Stainless steel

Measure length Code
1 - 15 mm MESU62600
15 - 30 mm MESU62605

(MESU019-04)

Length Code
150 mm MESU12484

Related products

Angle square 168 x 63 mm

Angle square 168 x 63 mmAngle square 168 x 63 mm
(MESU019-02)

Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.

Length Code
168 x 63 mm MESU62113

Related products

(MESU019-03)

Length Code
150 mm MESU12485
300 mm MESU12486

Related products

(MESU019-05)

Code
MESU62115

Related products

Chalk line

Chalk line
(MESU022-01)

With an integrated tip for working alone. 20 m highly resistant braided wire. Thanks to the transparent box, you can see the powder. Manual winding.

Code
MESU77560

Related products

Carpenter's square

Carpenter\'s square
(MESU018-11)

Seamless carpenter's square made of stainless steel The use of steel springs makes this square particularly flexible meaning it can bend without the risk of lasting deformation. The square can be easily fixed to parts and regain its initial shape. The carpenter's square is used for wooden assemblies. It allows for correct positioning of parts and assemblies. It also allows for marking and measurements.

Stainless steel
Millimetre graduation
Marking holes
Very flexible thanks to spring steel

Length Width Thickness Angle Code
700 300 1.2 90° (0.028°) MESUZ272

Stair drawing template

Stair drawing template
(MESU032-01)

Ideal for drawing stringers on turning stairsThe clamping bolts allow the templates to be connected to each other in a practical and efficient way. The height and width of the steps can be adjusted individually on each template.
Templates with millimetre graduation on both sides. The locks and templates are made of high quality stainless steel.

Made of stainless steel
Ideal for drawing stringers on turning stairs
Templates firmly fixed together with clamping bolts
Height and width of steps can be adjusted at will

Length Code
Basic pack 5 + 6 MESUT100
Basic pack 7 + 8 MESUT110

LYRA DRY PROFI marker

LYRA DRY PROFI markerLYRA DRY PROFI marker
(MARQ009-07)

- Top quality market with automatic lead feed in a high strength stainless steel tube
- Strong cap with improved clip easy to use with one hand
- Built-in sharpener with guide well thereby allowing for quick and easy sharpening without having to remove the cap from pocket
- Fitted with special all surface graphite lead (wood, metal, glass, ceramic, etc.) - writing easy to clean off smooth surfaces with a damp cloth
- Easy refilling of leads from front or rear of marker
- Multi-use thanks to coloured leads: for light or dark surfaces, erasable or water-proof.

Colour Code
GRAPHITE Display of 20 markers + 12 cases of 12 leads (8 graphites + 4 basics) MARQ9328
GRAPHITE Sold individually MARQ9327

Diameter and radius gauge

Diameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gaugeDiameter and radius gauge
(MESU027-02)

To measure radii, diameters, lengths and thicknesses. Easy to use thanks to its compact size.

Dimensions : 175 x 15 x 0.5 mm
Weight : 7.5 g

Measure length Rayon Code
150 mm 0.5 - 7 MESU73570
150 mm 8 - 15 MESU73571

Angle square 200 x 63 mm

Angle square 200 x 63 mmAngle square 200 x 63 mm
(MESU019-01)

Makes it easier to draw for miter cuts. Perfect for square rafters and framing studs. 100% aluminium.

Length Code
200 x 63 mm MESU62114

Related products

Profile gauge

Profile gauge
(MESU021-01)

These models have perfectly sliding, effortless hardened steel pins in a graduated support. Very handy to take a moulding profile or make a cut.

Length Code
150 mm MESU77970
200 mm MESU77984
300 mm MESU77971

Powdered chalk line

Powdered chalk linePowdered chalk line
(MESU022-02)

7 m of 0.6mm diameter wire. Integrated tip for easy pointing. Perfect for long working drawings of framework and stairs, and for edging a table. Auto-rewind.

Code
MESU77963

Related products

DRY LEADS - Set of leads

DRY LEADS - Set of leads
(MARQ009-03)

- For all surfaces
- Easy to erase from smooth surfaces
- Protect the red/yellow from high temperatures
- Unbreakable lead H7 Easy to remove
- One size For all diam.2.8mm
- Suitable For LYRA DRY PROFI / LYRA DRY PROFI LED / LYRA DRY

Colour Code
6 GRAPHITE 3 ROUGE 3 JAUNE MARQ9317
NOIR MARQ9320
JAUNE MARQ9322
ROUGE MARQ9323

Related products

Carpenter's kit in wooden box

Carpenter\'s kit in wooden box
(MESU018-10)

This marking and basic measuring kit for carpenters contains a carpenter's square, a mitre square and a bevel. The three measuring instruments all have a stainless steel blade. The excellent quality handles are made of walnut with brass hardware.

Stainless steel blade
Wear-resistant millimetre scale engraved on both sides of the steel blade
Brass hardware
With cap Reading and transfer of angles
Supplied in a wooden storage box

Code
MESUA033

STAINLESS STEEL engraved 35 cm carpenter's ruler

STAINLESS STEEL engraved 35 cm carpenter\'s ruler
(MESU018-05)

Very sturdy, made of stainless steel, 1.4 mm thick, the carpenter's ruler is graduated in cm from 0 to 35 then in mm from 0 to 150, engraved by deep acid etching on both sides.
350 mm long to measure in cm from 0 to 350 then in mm from 0 to 150.
The ruler has a matt anti-reflective coating and a hole centred at the end.

Length Code
350 MESU103011

Related products

Alpha square

Alpha square
(MESU018-06)

For cutting or assembly marking.

Graduation drilled every 5 mm on short arm.
Thickness 1.5 mm.

Length Angle Code
450 / 210 90° MESUM908

Ink line

Ink line
(MESU022-03)

10 m of 0.6mm diameter wire. Integrated tip for easy pointing. Perfect for long working drawings of framework and stairs, and for edging a table. Auto-rewind and high precision.

Code
MESU77481

Related products

DRY LEADS - Set of waterproof leads

DRY LEADS - Set of waterproof leads
(MARQ009-04)

- For all surfaces
- Easy to erase from smooth surfaces
- Protect the red/yellow from high temperatures
- Unbreakable lead case, easy to remove
- One size for all diam.2.8mm
- Suitable for LYRA DRY PROFI / LYRA DRY PROFI LED / LYRA DRY
- Waterproof

Colour Code
4 VERT 4 BLEU 4 BLANC Waterproof MARQ9318
BLEU Waterproof MARQ9324
VERT Waterproof MARQ9325

Related products

Chalk line powder

Chalk line powderChalk line powderChalk line powder
(MESU023-01)

Better hold on wood supports bois and less volatile than classic powders. Highly resistant to humidity and easy cleaning.

Color Code
BLEU MESU77937
ROUGE MESU77936
VERT MESU78030
JAUNE MESU77935

Related products

Carpenter pencils

Carpenter pencils
(MARQ009-02)

Length Code
250 Triangular multi-surface pencil MARQ0249
300 Carpenter pencil MARQ0248

Related products

Alpha marking kit

Alpha marking kit
(MESU018-09)

The set of Alpha marking instruments includes high quality tools: beech wood bevel, slotted end and a carpenter's square made of seamless stainless steel with marking holes and graduated scales both sides of the long leg.

Made of stainless steel
Three top quality carpenter's tools in one
For all carpentry work
Permanent engraved graduation
Very flexible spring steel
Marking holes

Length Width Thickness Code
790 430 5 MESUM900D

Ink

Ink
(MESU023-02)

Special ink for Shinwa Ink line.

Color Code
NOIR MESU77475

Related products

LYRA INK Deep Hole Marker

LYRA INK Deep Hole Marker
(MARQ009-05)

- Extra long tip of 35mm for precision marking
- Marker with profiled nib for areas difficult to access
- Marking on all surfaces (wood, metal, plastic, glass, ceramic, etc.)
- Permanent ink
- Plastic holder with belt clip
- Ergonomic triangular shape
- Available in black, blue and red

Colour Code
12 black + 3 blue + 5 red Display of 20 pieces MARQ9326
Red Sold individually MARQ9313
Blue Sold individually MARQ9314
Black Sold individually MARQ9315

Related products

Double alpha protractor

Double alpha protractor
(MESU018-08)

Marking instrument with long edge and double graduated scale.

Made of stainless steel.
Marking holes.
Quarter circle in the centre.
Double graduated scale.

Length Width Thickness Code
800 360 5 MESUM710

Log scribe

Log scribe
(MESU021-02)

Essential tool to realize all special plotting of log contruction : Carpentry, stairs, poles...

Code
Scribe MESU77590
Pencil MESU77597