Wood professionals

Discover our entire catalogue.

Wood carving

Sweep 1 - Double bevel straight chisel

Sweep 1 - Double bevel straight chiselSweep 1 - Double bevel straight chisel
(STUB007-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

Its cutting edge is straight with a double bevel.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
2 125 STUB550102
4 125 STUB550104
6 125 STUB550106
8 125 STUB550108
10 125 STUB550110
12 125 STUB550112
14 125 STUB550114
16 125 STUB550116
20 125 STUB550120
25 145 STUB550125
30 145 STUB550130
35 145 STUB550135
40 145 STUB550140
50 145 STUB550150
60 145 STUB550160

Sweep 1 - Straight chisel

Sweep 1 - Straight chiselSweep 1 - Straight chisel
(STUB007-02)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.

The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles for carving work.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
2 125 STUB550202
4 125 STUB550204
6 125 STUB550206
8 125 STUB550208
10 125 STUB550210
12 125 STUB550212
16 125 STUB550216
20 125 STUB550220
25 145 STUB550225
30 145 STUB550230
35 145 STUB550235
40 145 STUB550240
50 145 STUB550250
60 145 STUB550260

Sweep 1 - Single bevel chisel

Sweep 1 - Single bevel  chiselSweep 1 - Single bevel  chisel
(STUB007-03)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.
Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

Its cutting edge is straight with a single bevel.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

W L handle Code
6 125 STUB552106
8 125 STUB552108
12 125 STUB552112
20 125 STUB552120

Sweep 1 - Bent chisel

Sweep 1 - Bent  chiselSweep 1 - Bent  chisel
(STUB007-04)

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

The angled chisel has a straight cut, its angled part provides easier access to the bottom of patterns. It allows the handle to be raised so that it can project from the piece and facilitates the movement of the tool.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : work on openwork pieces, finishing of cuts and clearing of engravings

W L handle Code
6 125 STUB559906

Sweep 1 - Fish tail chisel

Sweep 1 - Fish tail chiselSweep 1 - Fish tail chisel
(STUB007-05)

The cutting edge of this tool is wider than the body. It penetrates more easily into intertwined shapes and openwork pieces. It is essentially used for finishing and generally by the force of the wrist.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

W L handle Code
2 125 STUB557102
4 125 STUB557104
6 125 STUB557106
8 125 STUB557108
10 125 STUB557110
12 125 STUB557112
14 125 STUB557114
16 125 STUB557116
20 125 STUB557120
25 145 STUB557125
30 145 STUB557130
35 145 STUB557135
40 145 STUB557140
50 145 STUB557150
60 145 STUB557160

Sweep 3 - Straight flat gouge

Sweep 3 - Straight flat gougeSweep 3 - Straight flat gouge
(STUB008-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550302
4 125 STUB550304
6 125 STUB550306
8 125 STUB550308
10 125 STUB550310
12 125 STUB550312
16 125 STUB550316
20 125 STUB550320
25 145 STUB550325
30 145 STUB550330
35 145 STUB550335
40 145 STUB550340
50 145 STUB550350
60 145 STUB550360

Sweep 4 - Straight flat gouge

Sweep 4 - Straight flat gougeSweep 4 - Straight flat gouge
(STUB009-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550402
4 125 STUB550404
6 125 STUB550406
8 125 STUB550408
10 125 STUB550410
12 125 STUB550412
16 125 STUB550416
20 125 STUB550420
25 145 STUB550425
30 145 STUB550430
35 145 STUB550435
40 145 STUB550440
50 145 STUB550450
60 145 STUB550460

Sweep 4 - Bent flat gouge

Sweep 4 - Bent flat gougeSweep 4 - Bent flat gouge
(STUB009-03)

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

This gouge is only used by the force of the wrist to hollow deep shapes.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, hollowing and different sizes of moulding.

W L handle Code
3 125 STUB552403
6 125 STUB552406
10 125 STUB552410
16 125 STUB552416
20 125 STUB552420
30 145 STUB552430

Sweep 4 - Bent flat gouge

Sweep 4 - Bent flat gougeSweep 4 - Bent flat gouge
(STUB009-02)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L handle Code
4 125 STUB551204
8 125 STUB551208
12 125 STUB551212
16 125 STUB551216
20 125 STUB551220
30 145 STUB551230

Sweep 4 - Back bent flat gouge

Sweep 4 - Back bent flat gougeSweep 4 - Back bent flat gouge
(STUB009-04)

The tool has the special feature of having a straight body and a back bent shape.

The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, carved consoles, feet and curved pieces.

W L handle Code
6 125 STUB553406
12 125 STUB553412
20 125 STUB553420

Sweep 4 - Flat gouge

Sweep 4 - Flat gougeSweep 4 - Flat gouge
(STUB009-05)

The straight tool has a body placed in the centre line of the handle allowing for a high cutting power.

The flat gouge allows for several effects : shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
6 125 STUB555406
12 125 STUB555412
20 125 STUB555420

Sweep 5 - Straight curved gouge

Sweep 5 - Straight curved gougeSweep 5 - Straight curved gouge
(STUB010-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck in the wood.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : precision carving (rosette, lettering, engraving, floral ornamentation, character lines of a face)

W L handle Code
2 125 STUB550502
4 125 STUB550504
6 125 STUB550506
8 125 STUB550508
10 125 STUB550510
12 125 STUB550512
14 125 STUB550514
16 125 STUB550516
20 125 STUB550520
25 145 STUB550525
30 145 STUB550530
35 145 STUB550535
40 145 STUB550540
50 145 STUB550550
60 145 STUB550560

Sweep 6 - Straight curved gouge

Sweep 6 - Straight curved gougeSweep 6 - Straight curved gouge
(STUB011-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck in the wood.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : precision carving (rosette, lettering, engraving, floral ornamentation, character lines of a face)

W L handle Code
2 125 STUB550602
4 125 STUB550604
6 125 STUB550606
8 125 STUB550608
10 125 STUB550610
12 125 STUB550612
16 125 STUB550616
20 125 STUB550620
25 145 STUB550625
30 145 STUB550630
40 145 STUB550640
50 145 STUB550650

Sweep 6 - Back bent curved gouge

Sweep 6 - Back bent curved gougeSweep 6 - Back bent curved gouge
(STUB011-02)

The tool has the special feature of having a straight body and a back bent shape.

The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, carved consoles, feet and curved pieces.

W L handle Code
4 125 STUB553604
10 125 STUB553610
16 125 STUB553616

Sweep 6 - Curved gouge

Sweep 6 - Curved gougeSweep 6 - Curved gouge
(STUB011-03)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L handle Code
4 125 STUB555604
10 125 STUB555610
16 125 STUB555616

Sweep 7 - Straight curved gouge

Sweep 7 - Straight curved gougeSweep 7 - Straight curved gouge
(STUB012-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck in the wood.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : precision carving (rosette, lettering, engraving, floral ornamentation, character lines of a face)

W L handle Code
2 125 STUB550702
4 125 STUB550704
6 125 STUB550706
8 125 STUB550708
10 125 STUB550710
12 125 STUB550712
16 125 STUB550716
20 125 STUB550720
25 145 STUB550725
30 145 STUB550730
35 145 STUB550735
40 145 STUB550740
50 145 STUB550750
60 145 STUB550760

Sweep 7 - Bent curved gouge

Sweep 7 - Bent curved gougeSweep 7 - Bent curved gouge
(STUB012-02)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L handle Code
4 125 STUB551604
8 125 STUB551608
12 125 STUB551612
16 125 STUB551616
20 125 STUB551620
30 145 STUB551630

Sweep 7 - Bent curved gouge

Sweep 7 - Bent curved gougeSweep 7 - Bent curved gouge
(STUB012-03)

The tools has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

This gouge is only used by the force of the wrist to hollow deep shapes.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, hollowing and different sizes of moulding.

W L handle Code
3 125 STUB552803
6 125 STUB552806
10 125 STUB552810
16 125 STUB552816
20 125 STUB552820
30 145 STUB552830

Sweep 8 - Straight U gouge

Sweep 8 - Straight U gougeSweep 8 - Straight U gouge
(STUB013-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550802
4 125 STUB550804
5 125 STUB550805
6 125 STUB550806
8 125 STUB550808
10 125 STUB550810
12 125 STUB550812
16 125 STUB550816
20 125 STUB550820
25 145 STUB550825
30 145 STUB550830
40 145 STUB550840
50 145 STUB550850

Sweep 8 - Back bent U gouge

Sweep 8 - Back bent U gougeSweep 8 - Back bent U gouge
(STUB013-02)

The tool has the special feature of having a straight body and a back bent shape.

The back bent gouge makes rounded cuts in hollow or hard to reach parts with a straight gouge.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, carved consoles, feet and curved pieces.

W L handle Code
6 125 STUB553806
12 125 STUB553812
20 125 STUB553820

Sweep 9 - Straight U gouge

Sweep 9 - Straight U gougeSweep 9 - Straight U gouge
(STUB014-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
2 125 STUB550902
4 125 STUB550904
6 125 STUB550906
8 125 STUB550908
10 125 STUB550910
12 125 STUB550912
16 125 STUB550916
20 125 STUB550920
25 145 STUB550925
30 145 STUB550930
35 145 STUB550935
40 145 STUB550940
50 145 STUB550950

Sweep 9 - Bent U gouge

Sweep 9 - Bent U gougeSweep 9 - Bent U gouge
(STUB014-02)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L handle Code
25 145 STUB551825

Sweep 10 - Straight U gouge

Sweep 10 - Straight U gougeSweep 10 - Straight U gouge
(STUB015-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
3 125 STUB551003
10 125 STUB551010
16 125 STUB551016
20 125 STUB551020

Sweep 11 - Straight short gouge

Sweep 11 - Straight short gougeSweep 11 - Straight short gouge
(STUB016-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

W L handle Code
1 125 STUB551101
2 125 STUB551102
3 125 STUB551103
4 125 STUB551104
5 125 STUB551105
6 125 STUB551106
8 125 STUB551108
10 125 STUB551110
12 125 STUB551112
14 125 STUB551114
16 125 STUB551116
20 125 STUB551120
25 145 STUB551125
30 145 STUB551130
35 145 STUB551135
40 145 STUB551140
50 145 STUB551150

Sweep 11 - Short bent gouge

Sweep 11 - Short bent gougeSweep 11 - Short bent gouge
(STUB016-02)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L handle Code
2 125 STUB552002
4 125 STUB552004
6 125 STUB552006
8 125 STUB552008
10 125 STUB552010
14 125 STUB552014
20 125 STUB552020

Sweep 11 - Short bent gouge

Sweep 11 - Short bent gougeSweep 11 - Short bent gouge
(STUB016-03)

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

This gouge is only used by the force of the wrist to hollow deep shapes.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, hollowing and different sizes of moulding.

W L handle Code
3 125 STUB553203
6 125 STUB553206
10 125 STUB553210
16 125 STUB553216
20 125 STUB553220
30 145 STUB553230

Sweep 39 - Straight V tool

Sweep 39 - Straight V toolSweep 39 - Straight V tool
(STUB017-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to cut straight lines as well as curves, it is often used by sculptors and furniture restorers.

High quality polished HSS V tool with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : preparation of contours for relief , cutting lines, lettering and working mouldings.

W L β° Code
2 125 75° STUB553902
4 125 75° STUB553904
6 125 75° STUB553906
8 125 75° STUB553908
10 125 75° STUB553910
12 125 75° STUB553912

Sweep 41 - Straight V tool

Sweep 41 - Straight V toolSweep 41 - Straight V tool
(STUB018-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.

The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.

High quality polished HSS V tool with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : preparation of contours for relief , carving lines, lettering and working mouldings.

W L β° Code
2 125 60° STUB554102
4 125 60° STUB554104
6 125 60° STUB554106
8 125 60° STUB554108
10 125 60° STUB554110
12 125 60° STUB554112
16 125 60° STUB554116
20 125 60° STUB554120

Sweep 41 - Bent V tool

Sweep 41 - Bent V toolSweep 41 - Bent V tool
(STUB018-02)

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

W L β° Code
2 125 60° STUB554202
6 125 60° STUB554206
10 125 60° STUB554210

Sweep 41 - Bent V tool

Sweep 41 - Bent V toolSweep 41 - Bent V tool
(STUB018-03)

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

The bent chisel enables sculptors to achieve finishes that cannot be a performed with a straight chisel.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : finishing relief work, work on cross members and uprights, well worked legs.

W L β° Code
2 125 60° STUB554402
4 125 60° STUB554404
6 125 60° STUB554406
10 125 60° STUB554410

Sweep 45 - Straight V tool

Sweep 45 - Straight V toolSweep 45 - Straight V tool
(STUB019-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.

The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.

High quality polished HSS V tool with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : preparation of contours for relief , carving lines, lettering and working mouldings.

W L β° Code
2 125 100° STUB554502
4 125 100° STUB554504
6 125 100° STUB554506
8 125 100° STUB554508
10 125 100° STUB554510
12 125 100° STUB554512
16 125 100° STUB554516
20 125 100° STUB554520
25 145 100° STUB554525
30 145 100° STUB554530

Sweep 47 - Straight V tool

Sweep 47 - Straight V toolSweep 47 - Straight V tool
(STUB020-01)

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.

The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.

High quality polished HSS V tool with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : preparation of contours for relief , carving lines, lettering and working mouldings.

W L Code
4 125 STUB554704
8 125 STUB554708
12 125 STUB554712

Wood carver's mallet

Wood carver\'s mallet
(STUB004-01)

The mallet has an ergonomic shape for sculptors to turn it in their hand and always have a good striking angle.
The force with which the tool is struck increases the power of the movement limiting the effort.

Variety of wood : beech

Weight Ø Code
70 400 STUB511001
80 620 STUB511002
110 920 STUB511003

Carving knives - whittling

Carving knives - whittling
(STUB003-01)

Knife for precision whittling

W Weight Code
50 20 STUB510501
50 20 STUB510505
50 25 Extra sharp STUB510521
45 15 STUB510601
45 20 Extra sharp STUB510621
45 25 STUB510701
50 13 STUB511501
45 30 STUB511601

Carving tool

Carving tool
(STUB022-01)

Micro-tool with ergonomic wooden handle for maximum control during delicate but also complex carvings.

W Weight Shape Code
1 3 21 STUB580103
1 5 21 STUB580105
1 7 21 STUB580107
2 3 21 STUB580203
2 5 21 STUB580205
2 7 21 STUB580207
3 3 21 STUB580303
3 5 21 STUB580305
3 7 21 STUB580307
5 3 21   STUB580503
5 5 21   STUB580505
5 7 21   STUB580507
7 3 21 STUB580703
7 5 21 STUB580705
9 2 21   STUB580902
9 4 21   STUB580904
11 2 21 STUB581102
11 3 21 STUB581103
11 4 21 STUB581104
12 3 21   STUB581203
12 5 21   STUB581205
12 7 21   STUB581207
16 3 21   STUB581603
16 5 21   STUB581605
20 2 21   STUB582002
20 4 21   STUB582004
21 3 21   STUB582103
21 5 21   STUB582105
24 3 21   STUB582403
24 5 21   STUB582405
24 7 21   STUB582407
28 3 21 STUB582803
28 5 21 STUB582805
32 3 21   STUB583203
32 5 21   STUB583205
39 3 38   STUB583903
39 5 21   STUB583905
40 3 21   STUB584003
40 5 21   STUB584005
41 3 21   STUB584103
41 5 21   STUB584105
42 2 21   STUB584202
42 4 21   STUB584204
43 3 21   STUB584303
43 5 21   STUB584305
44 2 38   STUB584402
44 4 21   STUB584404
45 3 21   STUB584503
45 5 21   STUB584505

Riffler rasps

Riffler rasps
(STUB030-01)

This tool is part of the rasp family, used to shape parts with complex shapes, to access corners and hard to reach surfaces.
Used for meticulous modelling work.

TL Weight Code
200 37 Flat pointed STUB538501
200 36 Flat STUB538502
200 37 Half round STUB538503
200 38 Triangular STUB538504
200 32 Half round STUB538505
200 34 Round STUB538506
200 31 Flat rasp knife STUB538507
200 37 Oval STUB538508

Carver's adze

Carver\'s adze
(STUB006-01)

This tool is intended for work on rough wood

W Weight Code
50 380 STUB520051
300 125   STUB520052
65 900 STUB520054
400 250   STUB520055
65 900   STUB520058